[Sun May 26 07:44:34 2013] Detection parameters:
  Position = (282.0, 281.9) = 17 50 16.73 35 4 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 16072.4 +/- 154.4
  Background counts = 258.1
  Rate = 0.6 +/- 0.005

[Sun May 26 07:44:35 2013] Off-axis axis estimate = 1.69'
[Sun May 26 07:49:27 2013] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Sun May 26 07:49:27 2013] Initial guess for spatial extent in simple fitting = 7.27"
[Sun May 26 07:49:27 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Sun May 26 07:49:27 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Sun May 26 09:19:11 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 26 09:19:11 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 26 09:19:11 2013] Fit fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun May 26 09:19:11 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 26 09:19:11 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 26 09:19:11 2013] Fit fullrun_pn_xmm0673851501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 26 11:01:03 2013] Spatial fit model total counts = 16766.000000, observed total counts = 16727.000000
[Sun May 26 11:01:03 2013] Offset between fit and detection position for source 1 = 0.078773 pixels
[Sun May 26 11:01:03 2013] 16757.290000 total counts/ 7713.850000 bgd. counts: snr = 102.967002
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.078773 pixels
  Position = (282.0, 281.8) = 17 50 16.74 35 4 59.3
  Extent = 11.6 (11.2-12.1)" x 9.9 (9.6-10.3)", rotation angle = 344 (336-351) degrees
  Source counts = 9043.4 +/- 129.4
  Background counts = 7713.9
  Rate = 0.5 +/- 0.007
[Sun May 26 11:01:03 2013] Vigneting correction estimate = 1.000000
[Sun May 26 11:01:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 11:01:03 2013] Assessing source extent using major axis lower bound
[Sun May 26 11:01:03 2013] Source does appear to be extended
[Sun May 26 11:01:03 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Sun May 26 11:01:26 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 26 11:01:26 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 11:01:26 2013] Initial guess for spatial extent in simple fitting = 10.79"
[Sun May 26 11:01:26 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.014
[Sun May 26 11:01:26 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 10.79"
[Sun May 26 11:54:49 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 26 11:54:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src1.csv
[Sun May 26 11:54:49 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 26 11:54:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src1.csv
[Sun May 26 11:54:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 11:54:50 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 26 11:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 26 11:54:50 2013] fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 26 11:54:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun May 26 11:54:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 13:08:51 2013] Warning, spatial fit 1 centroid is now closest to src. 17
[Sun May 26 13:08:51 2013] Vigneting correction estimate = 1.000000
[Sun May 26 13:08:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 13:08:51 2013] Assessing source extent using major axis lower bound
[Sun May 26 13:08:51 2013] Source does appear to be extended
[Sun May 26 13:08:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Sun May 26 13:09:09 2013] Counts = 9043.440000, rescaling region sizes by 2.000000
[Sun May 26 13:09:09 2013] XMMSAS src. selection expression = ellipse(24484.655870, 24471.981600, 1397.304040, 1191.548434, 344.458926, X, Y)
[Sun May 26 13:09:09 2013] Writing source region out to fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src1_src.reg
[Sun May 26 13:09:09 2013] Extracting stamp from image fullrun_pn_xmm0673851501_pi300-10000_cl_sm2.00.img.gz, (202, 202) - (362, 362)
[Sun May 26 13:09:09 2013] XMMSAS bgd. selection expression = annulus(24484.655870, 24471.981600, 4657.680134, 9315.360268, X, Y) && !ellipse(19534.502258, 28761.403442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22662.328552, 23581.597931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23441.664000, 23552.212000, 1311.368038, 1311.368038, 0.000000, X, Y) && !ellipse(24304.466827, 23217.967773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17830.480560, 18210.854660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22137.336334, 17974.283585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24540.889221, 31186.910767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14475.236404, 29556.290009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23606.810089, 26207.881226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26113.574585, 25998.205597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22541.168000, 25585.336000, 1850.336053, 1850.336053, 0.000000, X, Y) && !ellipse(22050.808929, 24573.216858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25603.269989, 22984.139343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22811.312866, 23024.506409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32225.951172, 20442.445282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19764.738434, 14697.576523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20994.970154, 14404.069672, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 13:09:09 2013] Writing fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src1.gif
[Sun May 26 13:09:25 2013] Mean detx,y = (21.18, -197.46) 
[Sun May 26 13:09:32 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 13:12:45 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 13:12:45 2013] Setting source spectrum file to fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun May 26 13:12:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun May 26 16:50:03 2013] Updating aperture counts using extracted products
[Sun May 26 16:50:03 2013] Total counts from fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 23069.00
[Sun May 26 16:50:03 2013] Total counts from fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src1_bgd.pi.gz = 31068.00
[Sun May 26 16:50:03 2013] Got source and background scale factors 4760271.000000, 170844886.000000
[Sun May 26 16:50:03 2013] User source parameters:
  Position = (282.0, 281.8) = 17 50 16.74 35 4 59.3
  Extent = 11.6 (11.2-12.1)" x 9.9 (9.6-10.3)", rotation angle = 344 (336-351) degrees
  Source aperture counts = 22203.3 +/- 152.9
  Background aperture counts = 865.7
  Rate = 1 +/- 0.009

[Sun May 26 16:50:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:50:09 2013] Using photon index=1.80, rate=0.506, arf fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src1.arf
[Sun May 26 16:50:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:50:09 2013] Updating source flux to 1.3e-12
[Sun May 26 16:50:24 2013] xmm0673851501/analysis//spectral/fullrun_pn_xmm0673851501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete