[Mon May 13 02:56:19 2013] Detection parameters:
  Position = (256.7, 401.5) = 12 34 28.42 9 55 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.2 +/- 12.2
  Background counts = 35.9
  Rate = 0.001 +/- 0.0003

[Mon May 13 02:56:20 2013] Off-axis axis estimate = 8.06'
[Mon May 13 02:59:50 2013] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Mon May 13 02:59:50 2013] Initial guess for spatial extent in simple fitting = 10.46"
[Mon May 13 02:59:50 2013] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.889
[Mon May 13 02:59:50 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.46"
[Mon May 13 05:31:57 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src28.ximg exists
[Mon May 13 05:31:57 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon May 13 05:31:57 2013] Fit fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src28 appears to have run properly
[Mon May 13 05:31:59 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon May 13 05:31:59 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon May 13 05:31:59 2013] Fit fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Mon May 13 09:58:45 2013] Spatial fit model total counts = 482.130000, observed total counts = 485.000000
[Mon May 13 09:58:45 2013] Offset between fit and detection position for source 31 = 5.135097 pixels
[Mon May 13 09:58:45 2013] 420.505300 total counts/ 331.532000 bgd. counts: snr = 4.886490
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 5.135097 pixels
  Position = (258.2, 406.4) = 12 34 27.99 9 55 29.0
  Extent = 19.6 (16.9-20.9)", rotation angle = 0
  Source counts = 89.0 +/- 20.5
  Background counts = 331.5
  Rate = 0.003 +/- 0.0006
[Mon May 13 09:58:45 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:58:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:58:45 2013] Assessing source extent using major axis lower bound
[Mon May 13 09:58:45 2013] Source does appear to be extended
[Mon May 13 09:58:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:58:45 2013] Source is confused with source 6
[Mon May 13 09:59:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 13 09:59:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 09:59:20 2013] Initial guess for spatial extent in simple fitting = 19.57"
[Mon May 13 09:59:20 2013] source mask rpix=4.5, npix_max = 99, mask sum = 100, frac = 1.000
[Mon May 13 09:59:20 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 19.57"
[Mon May 13 12:07:27 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src22.ximg exists
[Mon May 13 12:07:27 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src22.csv
[Mon May 13 12:07:27 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon May 13 12:07:27 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src22.csv
[Mon May 13 12:07:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 12:07:27 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon May 13 12:07:27 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon May 13 12:07:27 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon May 13 12:07:27 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Mon May 13 12:07:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:58:49 2013] Warning, spatial fit 22 centroid is now closest to src. 6
[Mon May 13 15:58:49 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:58:49 2013] Assessing source extent using major axis lower bound
[Mon May 13 15:58:49 2013] Source does appear to be extended
[Mon May 13 15:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 15:59:22 2013] XMMSAS src. selection expression = ellipse(22414.476200, 35306.182000, 1174.308034, 1174.308034, 0.000000, X, Y)
[Mon May 13 15:59:22 2013] Writing source region out to fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src31_src.reg
[Mon May 13 15:59:22 2013] Extracting stamp from image fullrun_pn_xmm0673851101_pi300-10000_cl_sm2.00.img.gz, (191, 339) - (326, 474)
[Mon May 13 15:59:22 2013] XMMSAS bgd. selection expression = annulus(22414.476200, 35306.182000, 1957.180056, 3914.360113, X, Y) && !ellipse(22800.074127, 36046.418854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18421.496719, 30920.940552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23528.061920, 37002.107269, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 15:59:22 2013] Writing fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src31.gif
[Mon May 13 16:22:48 2013] Mean detx,y = (-1349.15, 11512.29) 
[Mon May 13 16:22:50 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 16:23:53 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 16:23:53 2013] Setting source spectrum file to fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May 13 16:23:53 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue May 14 09:56:59 2013] Not generating rmf since there are only 88 counts
[Tue May 14 09:56:59 2013] rmf not generated due to insufficient counts
[Tue May 14 14:07:43 2013] Updating aperture counts using extracted products
[Tue May 14 14:07:43 2013] Total counts from fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 1071.00
[Tue May 14 14:07:43 2013] Total counts from fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 6467.00
[Tue May 14 14:07:43 2013] Got source and background scale factors 3875371.000000, 26100839.000000
[Tue May 14 14:07:43 2013] User source parameters:
  Position = (258.2, 406.4) = 12 34 27.99 9 55 29.0
  Extent = 19.6 (16.9-20.9)", rotation angle = 0
  Source aperture counts = 110.8 +/- 33.7
  Background aperture counts = 960.2
  Rate = 0.003 +/- 0.001

[Tue May 14 14:07:49 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 14:07:49 2013] Using photon index=1.80, rate=0.00264, arf fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src31.arf
[Tue May 14 14:07:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 14:07:49 2013] Updating source flux to 1.2e-14
[Tue May 14 14:08:19 2013] Flag c found in src. 31 procflags, skipping spectral fitting
[Tue May 14 14:08:19 2013] Source 31 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 14 14:08:31 2013] xmm0673851101/analysis//spectral/fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete