[Mon May 13 02:56:19 2013] Detection parameters:
  Position = (298.0, 401.4) = 12 34 16.28 9 55 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.7 +/- 13.1
  Background counts = 39.4
  Rate = 0.002 +/- 0.0004

[Mon May 13 02:56:20 2013] Off-axis axis estimate = 7.46'
[Mon May 13 02:59:50 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Mon May 13 02:59:50 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Mon May 13 02:59:50 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.933
[Mon May 13 02:59:50 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 10.16"
[Mon May 13 05:31:57 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src26.ximg exists
[Mon May 13 05:31:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src26.csv
[Mon May 13 05:31:57 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src26_1.ximg exists
[Mon May 13 05:31:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src26.csv
[Mon May 13 05:31:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:31:59 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Mon May 13 05:31:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon May 13 05:31:59 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Mon May 13 05:31:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Mon May 13 05:31:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:58:45 2013] Source 29 is offset by 4.565267 and -3.800088 pixels which is larger than
2 X fitted extent = 1.167821 x 1.750032, not incorporating fit results
[Mon May 13 09:58:45 2013] Source 29 is offset by 2.801267 and -3.796847 pixels which is larger than
2 X fitted extent = 1.146258 x 1.146258, not incorporating fit results
[Mon May 13 09:58:45 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:58:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:58:45 2013] Assessing source extent using major
[Mon May 13 09:58:45 2013] Source does appear to be extended
[Mon May 13 09:58:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:58:45 2013] Deleting source due to low Poisson probability 0.9