[Mon May 13 02:56:19 2013] Detection parameters:
  Position = (307.1, 265.9) = 12 34 13.60 9 45 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 189.4 +/- 28.5
  Background counts = 145.0
  Rate = 0.005 +/- 0.0008

[Mon May 13 02:56:20 2013] Off-axis axis estimate = 2.44'
[Mon May 13 02:59:50 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Mon May 13 02:59:50 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Mon May 13 02:59:50 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.735
[Mon May 13 02:59:50 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.65"
[Mon May 13 05:31:57 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src17.ximg exists
[Mon May 13 05:31:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src17.csv
[Mon May 13 05:31:57 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon May 13 05:31:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src17.csv
[Mon May 13 05:31:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 05:31:59 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon May 13 05:31:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon May 13 05:31:59 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon May 13 05:31:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon May 13 05:31:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:58:45 2013] Source 18 is offset by -3.560038 and 5.927538 pixels which is larger than
2 X fitted extent = 0.879209 x 4.670667, not incorporating fit results
[Mon May 13 09:58:45 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:58:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:58:45 2013] Assessing source extent using major
[Mon May 13 09:58:45 2013] Source does appear to be extended
[Mon May 13 09:58:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:58:45 2013] Source is confused with source 58
[Mon May 13 09:59:20 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Mon May 13 09:59:20 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Mon May 13 09:59:20 2013] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.735
[Mon May 13 09:59:20 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.65"
[Mon May 13 12:07:26 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src17.ximg exists
[Mon May 13 12:07:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src17.csv
[Mon May 13 12:07:26 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon May 13 12:07:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src17.csv
[Mon May 13 12:07:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 12:07:27 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon May 13 12:07:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon May 13 12:07:27 2013] fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon May 13 12:07:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Mon May 13 12:07:27 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:58:49 2013] Source 18 is offset by -4.998934 and -5.471726 pixels which is larger than
2 X fitted extent = 0.879209 x 0.879209, not incorporating fit results
[Mon May 13 15:58:49 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:58:49 2013] Assessing source extent using major
[Mon May 13 15:58:49 2013] Source does appear to be extended
[Mon May 13 15:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 15:59:22 2013] XMMSAS src. selection expression = ellipse(26667.182709, 23084.265808, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 15:59:22 2013] Writing source region out to fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src18_src.reg
[Mon May 13 15:59:22 2013] Extracting stamp from image fullrun_pn_xmm0673851101_pi300-10000_cl_sm2.00.img.gz, (270, 228) - (345, 303)
[Mon May 13 15:59:22 2013] XMMSAS bgd. selection expression = annulus(26667.182709, 23084.265808, 1087.500000, 2175.000000, X, Y) && !ellipse(23497.756000, 25502.716000, 1203.480035, 1203.480035, 0.000000, X, Y) && !ellipse(25461.556000, 23937.554000, 2297.488066, 2297.488066, 0.000000, X, Y) && !ellipse(22900.590000, 26252.770000, 2449.600070, 1492.440043, 51.982900, X, Y) && !ellipse(24756.218000, 25299.104000, 1119.840032, 1119.840032, 0.000000, X, Y) && !ellipse(24489.994000, 25397.842000, 2033.536059, 2033.536059, 0.000000, X, Y) && !ellipse(25691.358000, 24198.036000, 1120.512032, 1120.512032, 0.000000, X, Y) && !ellipse(24961.368000, 24563.636000, 1148.744033, 1148.744033, 0.000000, X, Y) && !ellipse(26202.836670, 24566.616455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26639.973969, 24380.485626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25506.610800, 23785.278000, 2305.248066, 1407.720041, 65.592000, X, Y) && !ellipse(26150.829956, 22823.281738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.338200, 20780.918800, 477.383214, 432.831212, 0.000000, X, Y)
[Mon May 13 15:59:22 2013] Writing fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src18.gif
[Mon May 13 16:19:28 2013] Mean detx,y = (-626.42, -1459.93) 
[Mon May 13 16:19:31 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 16:19:52 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 16:19:52 2013] Setting source spectrum file to fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 13 16:19:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue May 14 09:52:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 14 09:52:01 2013] rmf not generated due to insufficient counts
[Tue May 14 14:07:42 2013] Updating aperture counts using extracted products
[Tue May 14 14:07:42 2013] Total counts from fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 1022.00
[Tue May 14 14:07:42 2013] Total counts from fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src18_bgd.pi.gz = 1695.00
[Tue May 14 14:07:42 2013] Got source and background scale factors 1074594.000000, 3897847.000000
[Tue May 14 14:07:42 2013] User source parameters:
  Position = (307.1, 265.9) = 12 34 13.60 9 45 32.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 554.7 +/- 33.0
  Background aperture counts = 467.3
  Rate = 0.02 +/- 0.001

[Tue May 14 14:07:42 2013] Updating counts from extracted products
[Tue May 14 14:07:42 2013] Set source signif. to 554.71/21.62 = 25.66
[Tue May 14 14:07:49 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 14:07:49 2013] Using photon index=1.80, rate=0.0165, arf fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src18.arf
[Tue May 14 14:07:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 14:07:49 2013] Updating source flux to 6.1e-14
[Tue May 14 14:08:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 14:08:31 2013] xmm0673851101/analysis//spectral/fullrun_pn_xmm0673851101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete