[Mon May 13 02:57:28 2013] Detection parameters:
  Position = (172.4, 439.9) = 12 34 53.24 9 57 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 317.1 +/- 21.9
  Background counts = 15.4
  Rate = 0.008 +/- 0.0006

[Mon May 13 02:57:30 2013] Off-axis axis estimate = 13.73'
[Mon May 13 07:19:58 2013] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Mon May 13 07:19:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 07:19:58 2013] Initial guess for spatial extent in simple fitting = 13.30"
[Mon May 13 07:19:58 2013] source mask rpix=3.1, npix_max = 50, mask sum = 48, frac = 0.949
[Mon May 13 07:19:58 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 13.30"
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 13 09:58:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src4.csv
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 13 09:58:29 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src4.csv
[Mon May 13 09:58:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 13 09:58:30 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 13 09:58:30 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 13 09:58:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:59:05 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Mon May 13 09:59:05 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:59:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:59:05 2013] Assessing source extent using major
[Mon May 13 09:59:05 2013] Source does appear to be extended
[Mon May 13 09:59:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:59:05 2013] Source is confused with source 1
[Mon May 13 13:54:07 2013] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting
[Mon May 13 13:54:07 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 13:54:07 2013] Initial guess for spatial extent in simple fitting = 13.30"
[Mon May 13 13:54:07 2013] source mask rpix=3.1, npix_max = 50, mask sum = 48, frac = 0.949
[Mon May 13 13:54:07 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 13.30"
[Mon May 13 15:58:35 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 13 15:58:35 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src4.csv
[Mon May 13 15:58:35 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 13 15:58:35 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src4.csv
[Mon May 13 15:58:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 13 15:58:36 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 13 15:58:36 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 13 15:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:59:06 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Mon May 13 15:59:06 2013] Source 8 is offset by -5.380942 and -0.233868 pixels which is larger than
2 X fitted extent = 1.545122 x 1.545122, not incorporating fit results
[Mon May 13 15:59:06 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:59:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:59:06 2013] Assessing source extent using major
[Mon May 13 15:59:06 2013] Source does appear to be extended
[Mon May 13 15:59:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 12:39:21 2013] XMMSAS src. selection expression = ellipse(14954.436005, 38224.403107, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 12:39:21 2013] Writing source region out to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src8_src.reg
[Tue May 14 12:39:21 2013] Extracting stamp from image fullrun_mos2_xmm0673851101_pi300-10000_cl_sm2.00.img.gz, (135, 402) - (210, 477)
[Tue May 14 12:39:21 2013] XMMSAS bgd. selection expression = annulus(14954.436005, 38224.403107, 1087.500000, 2175.000000, X, Y) && !ellipse(14340.627747, 38048.810089, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 12:39:21 2013] Writing fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src8.gif
[Tue May 14 12:40:11 2013] Mean detx,y = (-4497.82, -17060.06) 
[Tue May 14 12:40:12 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 12:40:26 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 12:40:26 2013] Setting source spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 14 12:40:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue May 14 12:56:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 14 12:56:04 2013] rmf not generated due to insufficient counts
[Tue May 14 14:07:56 2013] Updating aperture counts using extracted products
[Tue May 14 14:07:56 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 440.00
[Tue May 14 14:07:56 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 435.00
[Tue May 14 14:07:56 2013] Got source and background scale factors 873554.000000, 4326426.000000
[Tue May 14 14:07:56 2013] User source parameters:
  Position = (172.4, 439.9) = 12 34 53.24 9 57 56.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 352.2 +/- 22.0
  Background aperture counts = 87.8
  Rate = 0.009 +/- 0.0006

[Tue May 14 14:07:56 2013] Updating counts from extracted products
[Tue May 14 14:07:56 2013] Set source signif. to 352.17/9.37 = 37.58
[Tue May 14 14:08:04 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 14:08:04 2013] Using photon index=1.80, rate=0.00905, arf fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src8.arf
[Tue May 14 14:08:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 14:08:04 2013] Updating source flux to 2.9e-13
[Tue May 14 14:08:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 14:08:19 2013] xmm0673851101/analysis//spectral/fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete