[Mon May 13 02:57:29 2013] Detection parameters:
  Position = (276.1, 286.2) = 12 34 22.70 9 46 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.8 +/- 18.7
  Background counts = 59.5
  Rate = 0.003 +/- 0.0005

[Mon May 13 02:57:30 2013] Off-axis axis estimate = 1.84'
[Mon May 13 07:19:58 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Mon May 13 07:19:58 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Mon May 13 07:19:58 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Mon May 13 07:19:58 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.35"
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src28.ximg exists
[Mon May 13 09:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src28.csv
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon May 13 09:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src28.csv
[Mon May 13 09:58:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon May 13 09:58:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon May 13 09:58:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon May 13 09:58:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:59:05 2013] Warning, spatial fit 28 centroid is now closest to src. 47
[Mon May 13 09:59:05 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:59:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:59:05 2013] Assessing source extent using major
[Mon May 13 09:59:05 2013] Source does appear to be extended
[Mon May 13 09:59:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:59:05 2013] Source is confused with source 47
[Mon May 13 13:54:07 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Mon May 13 13:54:07 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Mon May 13 13:54:07 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.834
[Mon May 13 13:54:07 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 7.35"
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src27.ximg exists
[Mon May 13 15:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src27.csv
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon May 13 15:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src27.csv
[Mon May 13 15:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon May 13 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon May 13 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon May 13 15:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:59:06 2013] Source 43 is offset by -2.437778 and 1.818790 pixels which is larger than
2 X fitted extent = 1.760575 x 1.760575, not incorporating fit results
[Mon May 13 15:59:06 2013] Spatial fit model total counts = 1344.200000, observed total counts = 1197.000000
[Mon May 13 15:59:06 2013] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 15:59:06 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:59:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:59:06 2013] Assessing source extent using major
[Mon May 13 15:59:06 2013] Source does appear to be extended
[Mon May 13 15:59:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 12:39:22 2013] XMMSAS src. selection expression = ellipse(23976.273346, 24853.874695, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing source region out to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src43_src.reg
[Tue May 14 12:39:22 2013] Extracting stamp from image fullrun_mos2_xmm0673851101_pi300-10000_cl_sm2.00.img.gz, (239, 249) - (314, 324)
[Tue May 14 12:39:22 2013] XMMSAS bgd. selection expression = annulus(23976.273346, 24853.874695, 1087.500000, 2175.000000, X, Y) && !ellipse(23037.323600, 25906.776000, 1225.360035, 1225.360035, 0.000000, X, Y) && !ellipse(26460.938800, 27322.392000, 391.039211, 391.039211, 0.000000, X, Y) && !ellipse(25421.681915, 24047.531677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.021500, 26646.282000, 271.935208, 271.935208, 0.000000, X, Y) && !ellipse(25256.401580, 24752.794000, 1113.752032, 246.682407, 62.178800, X, Y) && !ellipse(23352.972000, 25420.228400, 1221.360035, 1221.360035, 0.000000, X, Y) && !ellipse(26046.537740, 24042.052200, 1467.368042, 310.640009, 0.000000, X, Y) && !ellipse(23494.422699, 26131.777466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.270813, 26159.833160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.719000, 26051.187800, 1267.448036, 1267.448036, 0.000000, X, Y) && !ellipse(22699.458000, 26966.394000, 2504.672072, 2504.672072, 0.000000, X, Y) && !ellipse(26121.292755, 23618.582489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23068.548035, 27344.045258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24742.443115, 23555.299866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22292.054000, 27888.279400, 1326.296038, 1178.376034, 42.017100, X, Y) && !ellipse(23348.175720, 24599.650330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21808.222885, 27355.868103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24066.573547, 27092.860901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25178.884796, 25562.125000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20400.304000, 27964.104000, 1408.784041, 1408.784041, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src43.gif
[Tue May 14 12:46:17 2013] Mean detx,y = (-1057.11, -1437.22) 
[Tue May 14 12:46:18 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 12:46:28 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 12:46:28 2013] Setting source spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue May 14 12:46:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Tue May 14 13:26:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 14 13:26:49 2013] rmf not generated due to insufficient counts
[Tue May 14 14:08:00 2013] Updating aperture counts using extracted products
[Tue May 14 14:08:00 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 793.00
[Tue May 14 14:08:00 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src43_bgd.pi.gz = 689.00
[Tue May 14 14:08:00 2013] Got source and background scale factors 1194000.000000, 2256000.000000
[Tue May 14 14:08:00 2013] User source parameters:
  Position = (276.1, 286.2) = 12 34 22.70 9 46 46.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 428.3 +/- 29.2
  Background aperture counts = 364.7
  Rate = 0.01 +/- 0.0007

[Tue May 14 14:08:00 2013] Updating counts from extracted products
[Tue May 14 14:08:00 2013] Set source signif. to 428.34/19.10 = 22.43
[Tue May 14 14:08:04 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 14:08:04 2013] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src43.arf
[Tue May 14 14:08:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 14:08:04 2013] Updating source flux to 1e-13
[Tue May 14 14:08:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 14:08:19 2013] xmm0673851101/analysis//spectral/fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete