[Mon May 13 02:57:29 2013] Detection parameters:
  Position = (371.0, 296.8) = 12 33 54.79 9 47 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.3 +/- 9.7
  Background counts = 18.6
  Rate = 0.002 +/- 0.0004

[Mon May 13 02:57:30 2013] Off-axis axis estimate = 5.26'
[Mon May 13 07:19:58 2013] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Mon May 13 07:19:58 2013] Initial guess for spatial extent in simple fitting = 9.06"
[Mon May 13 07:19:58 2013] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.675
[Mon May 13 07:19:58 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 9.06"
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src37.ximg exists
[Mon May 13 09:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src37.csv
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src37_1.ximg exists
[Mon May 13 09:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src37.csv
[Mon May 13 09:58:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Mon May 13 09:58:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Mon May 13 09:58:31 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Mon May 13 09:58:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Mon May 13 09:58:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:59:05 2013] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 10.930163 pixels away
[Mon May 13 09:59:05 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:59:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:59:05 2013] Assessing source extent using major
[Mon May 13 09:59:05 2013] Source does appear to be extended
[Mon May 13 09:59:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 13:54:07 2013] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Mon May 13 13:54:07 2013] Initial guess for spatial extent in simple fitting = 9.06"
[Mon May 13 13:54:07 2013] source mask rpix=2.1, npix_max = 26, mask sum = 18, frac = 0.675
[Mon May 13 13:54:07 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 9.06"
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src35.ximg exists
[Mon May 13 15:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src35.csv
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon May 13 15:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src35.csv
[Mon May 13 15:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon May 13 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon May 13 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Mon May 13 15:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:59:06 2013] Source 38 is offset by 6.935260 and -7.180819 pixels which is larger than
2 X fitted extent = 1.105508 x 1.105508, not incorporating fit results
[Mon May 13 15:59:06 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:59:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:59:06 2013] Assessing source extent using major
[Mon May 13 15:59:06 2013] Source does appear to be extended
[Mon May 13 15:59:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 12:39:22 2013] XMMSAS src. selection expression = ellipse(32225.847626, 25771.622742, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing source region out to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src38_src.reg
[Tue May 14 12:39:22 2013] Extracting stamp from image fullrun_mos2_xmm0673851101_pi300-10000_cl_sm2.00.img.gz, (333, 259) - (408, 334)
[Tue May 14 12:39:22 2013] XMMSAS bgd. selection expression = annulus(32225.847626, 25771.622742, 1087.500000, 2175.000000, X, Y) && !ellipse(29810.299316, 25633.532013, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src38.gif
[Tue May 14 12:49:36 2013] Mean detx,y = (7087.99, 844.84) 
[Tue May 14 12:49:38 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 12:50:03 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 12:50:03 2013] Setting source spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Tue May 14 12:50:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Tue May 14 13:57:22 2013] Not generating rmf since there are only 54 counts
[Tue May 14 13:57:22 2013] rmf not generated due to insufficient counts
[Tue May 14 14:08:01 2013] Updating aperture counts using extracted products
[Tue May 14 14:08:01 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 133.00
[Tue May 14 14:08:01 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 877.00
[Tue May 14 14:08:01 2013] Got source and background scale factors 991702.000000, 9736557.000000
[Tue May 14 14:08:01 2013] User source parameters:
  Position = (371.0, 296.8) = 12 33 54.79 9 47 31.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 43.7 +/- 12.6
  Background aperture counts = 89.3
  Rate = 0.001 +/- 0.0003

[Tue May 14 14:08:01 2013] Updating counts from extracted products
[Tue May 14 14:08:01 2013] Set source signif. to 43.67/9.45 = 4.62
[Tue May 14 14:08:04 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 14:08:04 2013] Using photon index=1.80, rate=0.00112, arf fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src38.arf
[Tue May 14 14:08:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 14:08:04 2013] Updating source flux to 2.4e-14
[Tue May 14 14:08:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 14:08:19 2013] xmm0673851101/analysis//spectral/fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete