[Mon May 13 02:57:29 2013] Detection parameters:
  Position = (264.6, 306.8) = 12 34 26.08 9 48 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.9 +/- 18.1
  Background counts = 46.7
  Rate = 0.003 +/- 0.0005

[Mon May 13 02:57:30 2013] Off-axis axis estimate = 2.52'
[Mon May 13 07:19:58 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon May 13 07:19:58 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Mon May 13 07:19:58 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972
[Mon May 13 07:19:58 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 7.69"
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src29.ximg exists
[Mon May 13 09:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src29.csv
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon May 13 09:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src29.csv
[Mon May 13 09:58:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon May 13 09:58:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon May 13 09:58:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon May 13 09:58:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:59:05 2013] Warning, spatial fit 29 centroid is now closest to src. 35
[Mon May 13 09:59:05 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:59:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:59:05 2013] Assessing source extent using major
[Mon May 13 09:59:05 2013] Source does appear to be extended
[Mon May 13 09:59:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:59:05 2013] Source is confused with source 31
[Mon May 13 13:54:07 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Mon May 13 13:54:07 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Mon May 13 13:54:07 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972
[Mon May 13 13:54:07 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 7.69"
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src28.ximg exists
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon May 13 15:58:36 2013] Fit fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src28 appears to have run properly
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon May 13 15:58:37 2013] Fit fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Mon May 13 15:59:06 2013] Source 32 is offset by 0.210471 and 1.609168 pixels which is larger than
2 X fitted extent = 1.401090 x 1.401090, not incorporating fit results
[Mon May 13 15:59:06 2013] Warning, spatial fit 28 centroid is now closest to src. 31
[Mon May 13 15:59:06 2013] Source 32 is offset by 5.776126 and -2.081751 pixels which is larger than
2 X fitted extent = 0.891467 x 0.891467, not incorporating fit results
[Mon May 13 15:59:06 2013] Spatial fit model total counts = 1243.110000, observed total counts = 1224.000000
[Mon May 13 15:59:06 2013] Offset between fit and detection position for source 32 = 4.865605 pixels
[Mon May 13 15:59:06 2013] Warning, changing simple spatial fit ID from 28 to 43
[Mon May 13 15:59:06 2013] 1224.877000 total counts/ 738.356000 bgd. counts: snr = 17.904768
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 4.865605 pixels
  Position = (261.5, 310.5) = 12 34 27.02 9 48 32.0
  Extent = 31.3 (31.3-62.6)", rotation angle = 0
  Source counts = 486.5 +/- 35.0
  Background counts = 738.4
  Rate = 0.01 +/- 0.0009
[Mon May 13 15:59:06 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:59:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:59:06 2013] Assessing source extent using major axis lower bound
[Mon May 13 15:59:06 2013] Source does appear to be extended
[Mon May 13 15:59:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 12:39:22 2013] XMMSAS src. selection expression = ellipse(22699.458000, 26966.394000, 1878.504054, 1878.504054, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing source region out to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src32_src.reg
[Tue May 14 12:39:22 2013] Extracting stamp from image fullrun_mos2_xmm0673851101_pi300-10000_cl_sm2.00.img.gz, (154, 203) - (369, 418)
[Tue May 14 12:39:22 2013] XMMSAS bgd. selection expression = annulus(22699.458000, 26966.394000, 3130.840090, 6261.680180, X, Y) && !ellipse(23037.323600, 25906.776000, 1225.360035, 1225.360035, 0.000000, X, Y) && !ellipse(29810.299316, 25633.532013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16285.838943, 31534.541718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26460.938800, 27322.392000, 391.039211, 391.039211, 0.000000, X, Y) && !ellipse(25421.681915, 24047.531677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.021500, 26646.282000, 271.935208, 271.935208, 0.000000, X, Y) && !ellipse(25256.401580, 24752.794000, 1113.752032, 246.682407, 62.178800, X, Y) && !ellipse(23352.972000, 25420.228400, 1221.360035, 1221.360035, 0.000000, X, Y) && !ellipse(26046.537740, 24042.052200, 1467.368042, 310.640009, 0.000000, X, Y) && !ellipse(23494.422699, 26131.777466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.270813, 26159.833160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25009.655320, 28653.328800, 291.062408, 168.660805, 126.205900, X, Y) && !ellipse(22461.719000, 26051.187800, 1267.448036, 1267.448036, 0.000000, X, Y) && !ellipse(23976.273346, 24853.874695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18426.510742, 30993.908722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26121.292755, 23618.582489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20929.968399, 28978.725555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23068.548035, 27344.045258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24742.443115, 23555.299866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24110.362000, 28847.509800, 1256.376036, 613.001618, 141.358702, X, Y) && !ellipse(21563.373428, 28703.919403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22292.054000, 27888.279400, 1326.296038, 1178.376034, 42.017100, X, Y) && !ellipse(23348.175720, 24599.650330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21808.222885, 27355.868103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24066.573547, 27092.860901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25178.884796, 25562.125000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20400.304000, 27964.104000, 1408.784041, 1408.784041, 0.000000, X, Y) && !ellipse(24665.704840, 21543.932200, 572.163216, 572.163216, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src32.gif
[Tue May 14 12:46:32 2013] Mean detx,y = (-1421.31, -3428.88) 
[Tue May 14 12:46:34 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 12:47:59 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 12:47:59 2013] Setting source spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Tue May 14 12:47:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Tue May 14 14:08:00 2013] Updating aperture counts using extracted products
[Tue May 14 14:08:00 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 5227.00
[Tue May 14 14:08:00 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src32_bgd.pi.gz = 11263.00
[Tue May 14 14:08:00 2013] Got source and background scale factors 10664310.000000, 76279898.000000
[Tue May 14 14:08:00 2013] User source parameters:
  Position = (261.5, 310.5) = 12 34 27.02 9 48 32.0
  Extent = 31.3 (31.3-62.6)", rotation angle = 0
  Source aperture counts = 3652.4 +/- 73.3
  Background aperture counts = 1574.6
  Rate = 0.09 +/- 0.002

[Tue May 14 14:08:04 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 14:08:04 2013] Using photon index=1.80, rate=0.0125, arf fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src32.arf
[Tue May 14 14:08:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 14:08:04 2013] Updating source flux to 1.1e-13
[Tue May 14 14:08:14 2013] Flag b found in src. 32 procflags, skipping spectral fitting
[Tue May 14 14:08:14 2013] Flag c found in src. 32 procflags, skipping spectral fitting
[Tue May 14 14:08:19 2013] xmm0673851101/analysis//spectral/fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete