[Mon May 13 02:57:29 2013] Detection parameters:
  Position = (265.7, 314.9) = 12 34 25.77 9 48 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.8 +/- 15.0
  Background counts = 42.8
  Rate = 0.002 +/- 0.0004

[Mon May 13 02:57:30 2013] Off-axis axis estimate = 2.65'
[Mon May 13 07:19:58 2013] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Mon May 13 07:19:58 2013] Initial guess for spatial extent in simple fitting = 7.76"
[Mon May 13 07:19:58 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.959
[Mon May 13 07:19:58 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 7.76"
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src36.ximg exists
[Mon May 13 09:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src36.csv
[Mon May 13 09:58:29 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src36_1.ximg exists
[Mon May 13 09:58:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src36.csv
[Mon May 13 09:58:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Mon May 13 09:58:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Mon May 13 09:58:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src36.csv
[Mon May 13 09:58:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:59:05 2013] Source 28 is offset by 6.671541 and 2.608106 pixels which is larger than
2 X fitted extent = 7.131724 x 0.891467, not incorporating fit results
[Mon May 13 09:59:05 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:59:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:59:05 2013] Assessing source extent using major
[Mon May 13 09:59:05 2013] Source does appear to be extended
[Mon May 13 09:59:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:59:05 2013] Source is confused with source 25
[Mon May 13 13:54:07 2013] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Mon May 13 13:54:07 2013] Initial guess for spatial extent in simple fitting = 7.76"
[Mon May 13 13:54:07 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.959
[Mon May 13 13:54:07 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 7.76"
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src34.ximg exists
[Mon May 13 15:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src34.csv
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src34_1.ximg exists
[Mon May 13 15:58:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src34.csv
[Mon May 13 15:58:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Mon May 13 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Mon May 13 15:58:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Mon May 13 15:58:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 15:59:06 2013] Source 28 is offset by -0.933057 and -5.789411 pixels which is larger than
2 X fitted extent = 1.080782 x 1.080782, not incorporating fit results
[Mon May 13 15:59:06 2013] Warning, spatial fit 34 centroid is now closest to src. 32
[Mon May 13 15:59:06 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:59:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:59:06 2013] Assessing source extent using major
[Mon May 13 15:59:06 2013] Source does appear to be extended
[Mon May 13 15:59:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 12:39:22 2013] XMMSAS src. selection expression = ellipse(23068.548035, 27344.045258, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing source region out to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src28_src.reg
[Tue May 14 12:39:22 2013] Extracting stamp from image fullrun_mos2_xmm0673851101_pi300-10000_cl_sm2.00.img.gz, (228, 277) - (303, 352)
[Tue May 14 12:39:22 2013] XMMSAS bgd. selection expression = annulus(23068.548035, 27344.045258, 1087.500000, 2175.000000, X, Y) && !ellipse(23037.323600, 25906.776000, 1225.360035, 1225.360035, 0.000000, X, Y) && !ellipse(25256.401580, 24752.794000, 1113.752032, 246.682407, 62.178800, X, Y) && !ellipse(23352.972000, 25420.228400, 1221.360035, 1221.360035, 0.000000, X, Y) && !ellipse(26046.537740, 24042.052200, 1467.368042, 310.640009, 0.000000, X, Y) && !ellipse(23494.422699, 26131.777466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.270813, 26159.833160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25009.655320, 28653.328800, 291.062408, 168.660805, 126.205900, X, Y) && !ellipse(22461.719000, 26051.187800, 1267.448036, 1267.448036, 0.000000, X, Y) && !ellipse(23976.273346, 24853.874695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22699.458000, 26966.394000, 2504.672072, 2504.672072, 0.000000, X, Y) && !ellipse(20929.968399, 28978.725555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24110.362000, 28847.509800, 1256.376036, 613.001618, 141.358702, X, Y) && !ellipse(21563.373428, 28703.919403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22292.054000, 27888.279400, 1326.296038, 1178.376034, 42.017100, X, Y) && !ellipse(23348.175720, 24599.650330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21808.222885, 27355.868103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24066.573547, 27092.860901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25178.884796, 25562.125000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20400.304000, 27964.104000, 1408.784041, 1408.784041, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src28.gif
[Tue May 14 12:49:21 2013] Mean detx,y = (-998.25, -3950.46) 
[Tue May 14 12:49:22 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 12:49:33 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 12:49:33 2013] Setting source spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue May 14 12:49:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue May 14 13:57:08 2013] Not generating rmf since there are only 83 counts
[Tue May 14 13:57:08 2013] rmf not generated due to insufficient counts
[Tue May 14 14:08:01 2013] Updating aperture counts using extracted products
[Tue May 14 14:08:01 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 585.00
[Tue May 14 14:08:01 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src28_bgd.pi.gz = 21.00
[Tue May 14 14:08:01 2013] Got source and background scale factors 1198020.000000, 115200.000000
[Tue May 14 14:08:01 2013] User source parameters:
  Position = (265.7, 314.9) = 12 34 25.77 9 48 52.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 366.6 +/- 25.2
  Background aperture counts = 218.4
  Rate = 0.009 +/- 0.0006

[Tue May 14 14:08:01 2013] Updating counts from extracted products
[Tue May 14 14:08:01 2013] Set source signif. to 366.61/14.78 = 24.81
[Tue May 14 14:08:04 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 14:08:04 2013] Using photon index=1.80, rate=0.00942, arf fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src28.arf
[Tue May 14 14:08:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 14:08:04 2013] Updating source flux to 9.6e-14
[Tue May 14 14:08:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 14:08:19 2013] xmm0673851101/analysis//spectral/fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete