[Mon May 13 02:57:29 2013] Detection parameters:
  Position = (251.2, 315.0) = 12 34 30.03 9 48 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.7 +/- 13.6
  Background counts = 37.2
  Rate = 0.002 +/- 0.0004

[Mon May 13 02:57:30 2013] Off-axis axis estimate = 3.63'
[Mon May 13 07:19:58 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Mon May 13 07:19:58 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Mon May 13 07:19:58 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Mon May 13 07:19:58 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 8.24"
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src49.ximg exists
[Mon May 13 09:58:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src49.csv
[Mon May 13 09:58:30 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon May 13 09:58:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src49.csv
[Mon May 13 09:58:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:58:31 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon May 13 09:58:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon May 13 09:58:31 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon May 13 09:58:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon May 13 09:58:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:59:05 2013] Source 26 is offset by 7.424516 and 6.442323 pixels which is larger than
2 X fitted extent = 6.832184 x 7.578943, not incorporating fit results
[Mon May 13 09:59:05 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:59:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:59:05 2013] Assessing source extent using major
[Mon May 13 09:59:05 2013] Source does appear to be extended
[Mon May 13 09:59:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 09:59:05 2013] Source is confused with source 25
[Mon May 13 13:54:07 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Mon May 13 13:54:07 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Mon May 13 13:54:07 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.872
[Mon May 13 13:54:07 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 8.24"
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src46.ximg exists
[Mon May 13 15:58:36 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src46_1.ximg exists
[Mon May 13 15:58:36 2013] Fit fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_src46 appears to have run properly
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Mon May 13 15:58:37 2013] fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Mon May 13 15:58:37 2013] Fit fullrun_mos2_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Mon May 13 15:59:06 2013] Source 26 is offset by 7.795068 and -0.575631 pixels which is larger than
2 X fitted extent = 1.821044 x 1.821044, not incorporating fit results
[Mon May 13 15:59:06 2013] Warning, spatial fit 46 centroid is now closest to src. 31
[Mon May 13 15:59:06 2013] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 25.415729 pixels away
[Mon May 13 15:59:06 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:59:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:59:06 2013] Assessing source extent using major
[Mon May 13 15:59:06 2013] Source does appear to be extended
[Mon May 13 15:59:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 12:39:22 2013] XMMSAS src. selection expression = ellipse(21808.222885, 27355.868103, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing source region out to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src26_src.reg
[Tue May 14 12:39:22 2013] Extracting stamp from image fullrun_mos2_xmm0673851101_pi300-10000_cl_sm2.00.img.gz, (214, 277) - (289, 352)
[Tue May 14 12:39:22 2013] XMMSAS bgd. selection expression = annulus(21808.222885, 27355.868103, 1087.500000, 2175.000000, X, Y) && !ellipse(23037.323600, 25906.776000, 1225.360035, 1225.360035, 0.000000, X, Y) && !ellipse(23352.972000, 25420.228400, 1221.360035, 1221.360035, 0.000000, X, Y) && !ellipse(23494.422699, 26131.777466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24094.270813, 26159.833160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.719000, 26051.187800, 1267.448036, 1267.448036, 0.000000, X, Y) && !ellipse(23976.273346, 24853.874695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22699.458000, 26966.394000, 2504.672072, 2504.672072, 0.000000, X, Y) && !ellipse(20929.968399, 28978.725555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23068.548035, 27344.045258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24110.362000, 28847.509800, 1256.376036, 613.001618, 141.358702, X, Y) && !ellipse(21563.373428, 28703.919403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22292.054000, 27888.279400, 1326.296038, 1178.376034, 42.017100, X, Y) && !ellipse(23348.175720, 24599.650330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24066.573547, 27092.860901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20400.304000, 27964.104000, 1408.784041, 1408.784041, 0.000000, X, Y)
[Tue May 14 12:39:22 2013] Writing fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src26.gif
[Tue May 14 12:53:49 2013] Mean detx,y = (-2045.51, -4432.07) 
[Tue May 14 12:53:50 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 12:53:58 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 12:53:58 2013] Setting source spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue May 14 12:53:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue May 14 14:02:32 2013] Not generating rmf since there are only 58 counts
[Tue May 14 14:02:32 2013] rmf not generated due to insufficient counts
[Tue May 14 14:08:03 2013] Updating aperture counts using extracted products
[Tue May 14 14:08:03 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 507.00
[Tue May 14 14:08:03 2013] Total counts from fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 43.00
[Tue May 14 14:08:03 2013] Got source and background scale factors 1336000.000000, 347200.000000
[Tue May 14 14:08:03 2013] User source parameters:
  Position = (251.2, 315.0) = 12 34 30.03 9 48 55.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 341.5 +/- 23.5
  Background aperture counts = 165.5
  Rate = 0.009 +/- 0.0006

[Tue May 14 14:08:03 2013] Updating counts from extracted products
[Tue May 14 14:08:03 2013] Set source signif. to 341.54/12.86 = 26.55
[Tue May 14 14:08:04 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 14:08:04 2013] Using photon index=1.80, rate=0.00878, arf fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src26.arf
[Tue May 14 14:08:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 14:08:04 2013] Updating source flux to 1e-13
[Tue May 14 14:08:14 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 14 14:08:19 2013] xmm0673851101/analysis//spectral/fullrun_mos2_xmm0673851101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete