[Mon May 13 02:56:51 2013] Detection parameters:
  Position = (299.2, 225.1) = 12 34 15.92 9 42 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.3 +/- 20.8
  Background counts = 33.0
  Rate = 0.009 +/- 0.0006

[Mon May 13 02:56:53 2013] Off-axis axis estimate = 5.32'
[Mon May 13 05:32:00 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Mon May 13 05:32:00 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Mon May 13 05:32:00 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.821
[Mon May 13 05:32:00 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.09"
[Mon May 13 07:19:56 2013] fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_src3.ximg exists
[Mon May 13 07:19:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_src3.csv
[Mon May 13 07:19:56 2013] fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon May 13 07:19:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_src3.csv
[Mon May 13 07:19:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 07:19:57 2013] fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon May 13 07:19:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May 13 07:19:57 2013] fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon May 13 07:19:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon May 13 07:19:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673851101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 09:58:55 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.569650 pixels away
[Mon May 13 09:58:55 2013] Vigneting correction estimate = 1.000000
[Mon May 13 09:58:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 09:58:55 2013] Assessing source extent using major
[Mon May 13 09:58:55 2013] Source does appear to be extended
[Mon May 13 09:58:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 12:07:28 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Mon May 13 12:07:28 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Mon May 13 12:07:28 2013] source mask rpix=2.1, npix_max = 26, mask sum = 22, frac = 0.821
[Mon May 13 12:07:28 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.09"
[Mon May 13 13:54:05 2013] fullrun_mos1_xmm0673851101_pi300-10000_cl_pass1_src3.ximg exists
[Mon May 13 13:54:05 2013] fullrun_mos1_xmm0673851101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May 13 13:54:05 2013] Fit fullrun_mos1_xmm0673851101_pi300-10000_cl_pass1_src3 appears to have run properly
[Mon May 13 13:54:06 2013] fullrun_mos1_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May 13 13:54:06 2013] fullrun_mos1_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May 13 13:54:06 2013] Fit fullrun_mos1_xmm0673851101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May 13 15:58:56 2013] Spatial fit model total counts = 447.378000, observed total counts = 425.000000
[Mon May 13 15:58:56 2013] Offset between fit and detection position for source 3 = 0.445826 pixels
[Mon May 13 15:58:56 2013] 447.602000 total counts/ 265.913000 bgd. counts: snr = 11.141890
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.445826 pixels
  Position = (299.3, 225.6) = 12 34 15.89 9 42 22.5
  Extent = 4.7 (3.8-5.5)", rotation angle = 0
  Source counts = 181.7 +/- 21.2
  Background counts = 265.9
  Rate = 0.005 +/- 0.0005
[Mon May 13 15:58:56 2013] Vigneting correction estimate = 1.000000
[Mon May 13 15:58:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 15:58:56 2013] Assessing source extent using major axis lower bound
[Mon May 13 15:58:56 2013] Source does appear to be extended
[Mon May 13 15:58:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 11:07:45 2013] XMMSAS src. selection expression = ellipse(25988.419400, 19574.789800, 279.049208, 279.049208, 0.000000, X, Y)
[Tue May 14 11:07:45 2013] Writing source region out to fullrun_mos1_xmm0673851101_pi300-10000_pass1_cl_src3_src.reg
[Tue May 14 11:07:45 2013] Extracting stamp from image fullrun_mos1_xmm0673851101_pi300-10000_cl_sm2.00.img.gz, (283, 210) - (315, 242)
[Tue May 14 11:07:45 2013] XMMSAS bgd. selection expression = annulus(25988.419400, 19574.789800, 465.082013, 930.164027, X, Y)
[Tue May 14 11:07:45 2013] Writing fullrun_mos1_xmm0673851101_pi300-10000_pass1_cl_src3.gif
[Tue May 14 11:08:18 2013] Mean detx,y = (4507.69, 931.88) 
[Tue May 14 11:08:19 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 14 11:08:26 2013] Binned source spectrum to 10 counts/bin
[Tue May 14 11:08:26 2013] Setting source spectrum file to fullrun_mos1_xmm0673851101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 14 11:08:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673851101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 14 14:07:50 2013] Updating aperture counts using extracted products
[Tue May 14 14:07:50 2013] Total counts from fullrun_mos1_xmm0673851101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 213.00
[Tue May 14 14:07:51 2013] Total counts from fullrun_mos1_xmm0673851101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 257.00
[Tue May 14 14:07:51 2013] Got source and background scale factors 220264.000000, 1797932.000000
[Tue May 14 14:07:51 2013] User source parameters:
  Position = (299.3, 225.6) = 12 34 15.89 9 42 22.5
  Extent = 4.7 (3.8-5.5)", rotation angle = 0
  Source aperture counts = 181.5 +/- 15.6
  Background aperture counts = 31.5
  Rate = 0.005 +/- 0.0004

[Tue May 14 14:07:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 14 14:07:55 2013] Using photon index=1.80, rate=0.00469, arf fullrun_mos1_xmm0673851101_pi300-10000_pass1_cl_src3.arf
[Tue May 14 14:07:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 14 14:07:55 2013] Updating source flux to 7.6e-14
[Tue May 14 14:08:14 2013] xmm0673851101/analysis//spectral/fullrun_mos1_xmm0673851101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete