[Wed May 15 04:20:57 2013] Detection parameters:
  Position = (376.6, 363.2) = 9 8 52.01 11 1 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.4 +/- 15.7
  Background counts = 18.6
  Rate = 0.01 +/- 0.001

[Wed May 15 04:20:58 2013] Off-axis axis estimate = 7.35'
[Wed May 15 07:02:48 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:02:48 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed May 15 07:02:48 2013] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.627
[Wed May 15 07:02:48 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 10.11"
[Wed May 15 07:56:49 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src8.ximg exists
[Wed May 15 07:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src8.csv
[Wed May 15 07:56:49 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed May 15 07:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src8.csv
[Wed May 15 07:56:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:56:49 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed May 15 07:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 15 07:56:49 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed May 15 07:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 15 07:56:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:57:22 2013] Warning, spatial fit 8 centroid is now closest to src. 18
[Wed May 15 07:57:22 2013] Source 6 is offset by -3.454349 and 3.581691 pixels which is larger than
2 X fitted extent = 1.238483 x 1.238483, not incorporating fit results
[Wed May 15 07:57:22 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:57:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:57:22 2013] Assessing source extent using major
[Wed May 15 07:57:22 2013] Source does appear to be extended
[Wed May 15 07:57:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:57:22 2013] Source is confused with source 18
[Wed May 15 10:31:19 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed May 15 10:31:19 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 15 10:31:19 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed May 15 10:31:19 2013] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.627
[Wed May 15 10:31:19 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 10.11"
[Wed May 15 11:15:23 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src8.ximg exists
[Wed May 15 11:15:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src8.csv
[Wed May 15 11:15:23 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed May 15 11:15:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src8.csv
[Wed May 15 11:15:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 11:15:23 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed May 15 11:15:23 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed May 15 11:15:23 2013] Fit fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed May 15 11:15:46 2013] Spatial fit model total counts = 500.864000, observed total counts = 458.000000
[Wed May 15 11:15:46 2013] Offset between fit and detection position for source 6 = 1.022246 pixels
[Wed May 15 11:15:46 2013] 470.151000 total counts/ 293.781000 bgd. counts: snr = 10.289940
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.022246 pixels
  Position = (377.4, 363.7) = 9 8 51.75 11 1 36.6
  Extent = 11.6 (8.1-15.8)", rotation angle = 0
  Source counts = 176.4 +/- 21.7
  Background counts = 293.8
  Rate = 0.009 +/- 0.001
[Wed May 15 11:15:46 2013] Vigneting correction estimate = 1.000000
[Wed May 15 11:15:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 11:15:46 2013] Assessing source extent using major axis lower bound
[Wed May 15 11:15:46 2013] Source does appear to be extended
[Wed May 15 11:15:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 12:53:43 2013] XMMSAS src. selection expression = ellipse(32787.265000, 31592.922400, 695.412020, 695.412020, 0.000000, X, Y)
[Wed May 15 12:53:43 2013] Writing source region out to fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src6_src.reg
[Wed May 15 12:53:43 2013] Extracting stamp from image fullrun_mos2_xmm0673850901_pi300-10000_cl_sm2.00.img.gz, (337, 324) - (417, 404)
[Wed May 15 12:53:43 2013] XMMSAS bgd. selection expression = annulus(32787.265000, 31592.922400, 1159.020033, 2318.040067, X, Y) && !ellipse(30099.556793, 29115.467529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34481.321564, 29905.707794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34044.508179, 29621.123169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32218.687012, 31547.808899, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 12:53:43 2013] Writing fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src6.gif
[Wed May 15 13:01:41 2013] Mean detx,y = (-6931.65, 2069.07) 
[Wed May 15 13:01:42 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 13:02:02 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 13:02:02 2013] Setting source spectrum file to fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed May 15 13:02:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed May 15 13:21:15 2013] Updating aperture counts using extracted products
[Wed May 15 13:21:15 2013] Total counts from fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 381.00
[Wed May 15 13:21:16 2013] Total counts from fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1245.00
[Wed May 15 13:21:16 2013] Got source and background scale factors 1350566.000000, 10485787.000000
[Wed May 15 13:21:16 2013] User source parameters:
  Position = (377.4, 363.7) = 9 8 51.75 11 1 36.6
  Extent = 11.6 (8.1-15.8)", rotation angle = 0
  Source aperture counts = 220.6 +/- 20.5
  Background aperture counts = 160.4
  Rate = 0.01 +/- 0.001

[Wed May 15 13:21:18 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 13:21:18 2013] Using photon index=1.80, rate=0.00897, arf fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src6.arf
[Wed May 15 13:21:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 13:21:18 2013] Updating source flux to 1.3e-13
[Wed May 15 13:21:23 2013] Flag b found in src. 6 procflags, skipping spectral fitting
[Wed May 15 13:21:23 2013] Flag c found in src. 6 procflags, skipping spectral fitting
[Wed May 15 13:21:25 2013] xmm0673850901/analysis//spectral/fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete