[Wed May 15 04:20:57 2013] Detection parameters:
  Position = (316.9, 322.1) = 9 9 9.64 10 58 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 415.7 +/- 26.7
  Background counts = 33.5
  Rate = 0.02 +/- 0.001

[Wed May 15 04:20:58 2013] Off-axis axis estimate = 2.18'
[Wed May 15 07:02:48 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Wed May 15 07:02:48 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Wed May 15 07:02:48 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.705
[Wed May 15 07:02:48 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.52"
[Wed May 15 07:56:49 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 15 07:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src4.csv
[Wed May 15 07:56:49 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 15 07:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src4.csv
[Wed May 15 07:56:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:56:49 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 15 07:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 15 07:56:49 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 15 07:56:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 15 07:56:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850901_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 07:57:22 2013] Spatial fit model total counts = 2352.640000, observed total counts = 1993.000000
[Wed May 15 07:57:22 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 15 07:57:22 2013] Source 1 is offset by -2.188190 and 5.580977 pixels which is larger than
2 X fitted extent = 1.946759 x 6.927678, not incorporating fit results
[Wed May 15 07:57:22 2013] Vigneting correction estimate = 1.000000
[Wed May 15 07:57:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 07:57:22 2013] Assessing source extent using major
[Wed May 15 07:57:22 2013] Source does appear to be extended
[Wed May 15 07:57:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 07:57:22 2013] Source is confused with source 8
[Wed May 15 10:31:19 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Wed May 15 10:31:19 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Wed May 15 10:31:19 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.705
[Wed May 15 10:31:19 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.52"
[Wed May 15 11:15:23 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 15 11:15:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src4.csv
[Wed May 15 11:15:23 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 15 11:15:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src4.csv
[Wed May 15 11:15:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 11:15:23 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 15 11:15:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 15 11:15:23 2013] fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 15 11:15:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 15 11:15:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850901_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 15 11:15:46 2013] Spatial fit model total counts = 2353.700000, observed total counts = 1993.000000
[Wed May 15 11:15:46 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 15 11:15:46 2013] Source 1 is offset by -2.188190 and 5.861574 pixels which is larger than
2 X fitted extent = 6.927678 x 2.049844, not incorporating fit results
[Wed May 15 11:15:46 2013] Vigneting correction estimate = 1.000000
[Wed May 15 11:15:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 15 11:15:46 2013] Assessing source extent using major
[Wed May 15 11:15:46 2013] Source does appear to be extended
[Wed May 15 11:15:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 15 12:53:43 2013] XMMSAS src. selection expression = ellipse(27520.421509, 27978.360962, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 15 12:53:43 2013] Writing source region out to fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src1_src.reg
[Wed May 15 12:53:43 2013] Extracting stamp from image fullrun_mos2_xmm0673850901_pi300-10000_cl_sm2.00.img.gz, (279, 285) - (354, 360)
[Wed May 15 12:53:43 2013] XMMSAS bgd. selection expression = annulus(27520.421509, 27978.360962, 1087.500000, 2175.000000, X, Y) && !ellipse(30099.556793, 29115.467529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26591.434723, 27796.188782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27367.074982, 28401.145172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.742462, 28982.461182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25295.206940, 28818.069733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28357.939880, 26950.362823, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 15 12:53:43 2013] Writing fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src1.gif
[Wed May 15 13:00:51 2013] Mean detx,y = (-806.05, -54.84) 
[Wed May 15 13:00:52 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 15 13:00:58 2013] Binned source spectrum to 10 counts/bin
[Wed May 15 13:00:58 2013] Setting source spectrum file to fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed May 15 13:00:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed May 15 13:09:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 15 13:09:33 2013] rmf not generated due to insufficient counts
[Wed May 15 13:21:15 2013] Updating aperture counts using extracted products
[Wed May 15 13:21:15 2013] Total counts from fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1391.00
[Wed May 15 13:21:15 2013] Total counts from fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1977.00
[Wed May 15 13:21:15 2013] Got source and background scale factors 1154728.000000, 6214084.000000
[Wed May 15 13:21:15 2013] User source parameters:
  Position = (316.9, 322.1) = 9 9 9.64 10 58 34.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1023.6 +/- 38.3
  Background aperture counts = 367.4
  Rate = 0.05 +/- 0.002

[Wed May 15 13:21:15 2013] Updating counts from extracted products
[Wed May 15 13:21:15 2013] Set source signif. to 1023.63/19.17 = 53.41
[Wed May 15 13:21:18 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 15 13:21:18 2013] Using photon index=1.80, rate=0.0521, arf fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src1.arf
[Wed May 15 13:21:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 15 13:21:18 2013] Updating source flux to 5.2e-13
[Wed May 15 13:21:23 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 15 13:21:25 2013] xmm0673850901/analysis//spectral/fullrun_mos2_xmm0673850901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete