[Thu May 16 00:58:16 2013] Detection parameters:
  Position = (202.2, 316.8) = 7 32 56.63 31 37 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.9 +/- 10.1
  Background counts = 22.0
  Rate = 0.003 +/- 0.0006

[Thu May 16 00:58:17 2013] Off-axis axis estimate = 7.10'
[Thu May 16 01:01:53 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Thu May 16 01:01:53 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Thu May 16 01:01:53 2013] source mask rpix=2.3, npix_max = 31, mask sum = 35, frac = 1.120
[Thu May 16 01:01:53 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 9.98"
[Thu May 16 02:42:00 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src30.ximg exists
[Thu May 16 02:42:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src30.csv
[Thu May 16 02:42:00 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu May 16 02:42:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src30.csv
[Thu May 16 02:42:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 02:42:01 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu May 16 02:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu May 16 02:42:01 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu May 16 02:42:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu May 16 02:42:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:55:05 2013] Spatial fit model total counts = 323.342000, observed total counts = 259.000000
[Thu May 16 05:55:05 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 05:55:05 2013] Vigneting correction estimate = 1.000000
[Thu May 16 05:55:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 05:55:05 2013] Assessing source extent using major
[Thu May 16 05:55:05 2013] Source does appear to be extended
[Thu May 16 05:55:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 05:55:05 2013] Deleting source due to low Poisson probability 0.9