[Thu May 16 00:58:15 2013] Detection parameters:
  Position = (202.1, 374.8) = 7 32 56.69 31 41 58.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.6 +/- 14.4
  Background counts = 23.3
  Rate = 0.008 +/- 0.0009

[Thu May 16 00:58:17 2013] Off-axis axis estimate = 8.91'
[Thu May 16 01:01:53 2013] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Thu May 16 01:01:53 2013] Initial guess for spatial extent in simple fitting = 10.88"
[Thu May 16 01:01:53 2013] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.915
[Thu May 16 01:01:53 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.88"
[Thu May 16 02:42:00 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src10.ximg exists
[Thu May 16 02:42:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src10.csv
[Thu May 16 02:42:00 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May 16 02:42:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src10.csv
[Thu May 16 02:42:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 02:42:00 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May 16 02:42:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 16 02:42:00 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May 16 02:42:00 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Thu May 16 02:42:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:55:05 2013] Source 10 is offset by -0.161137 and 6.313383 pixels which is larger than
2 X fitted extent = 1.251103 x 1.251103, not incorporating fit results
[Thu May 16 05:55:05 2013] Vigneting correction estimate = 1.000000
[Thu May 16 05:55:05 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 05:55:05 2013] Assessing source extent using major
[Thu May 16 05:55:05 2013] Source does appear to be extended
[Thu May 16 05:55:05 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 05:55:29 2013] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Thu May 16 05:55:29 2013] Initial guess for spatial extent in simple fitting = 10.88"
[Thu May 16 05:55:29 2013] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.915
[Thu May 16 05:55:29 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 10.88"
[Thu May 16 06:48:43 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_src9.ximg exists
[Thu May 16 06:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_src9.csv
[Thu May 16 06:48:43 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu May 16 06:48:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_src9.csv
[Thu May 16 06:48:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 06:48:44 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu May 16 06:48:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu May 16 06:48:44 2013] fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu May 16 06:48:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu May 16 06:48:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 09:19:45 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 12.806063 pixels away
[Thu May 16 09:19:45 2013] Vigneting correction estimate = 1.000000
[Thu May 16 09:19:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 09:19:45 2013] Assessing source extent using major
[Thu May 16 09:19:45 2013] Source does appear to be extended
[Thu May 16 09:19:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 09:20:04 2013] XMMSAS src. selection expression = ellipse(17532.446884, 32556.048309, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 16 09:20:04 2013] Writing source region out to fullrun_pn_xmm0673850201_pi300-10000_pass1_cl_src10_src.reg
[Thu May 16 09:20:04 2013] Extracting stamp from image fullrun_pn_xmm0673850201_pi300-10000_cl_sm2.00.img.gz, (165, 337) - (240, 412)
[Thu May 16 09:20:04 2013] XMMSAS bgd. selection expression = annulus(17532.446884, 32556.048309, 1087.500000, 2175.000000, X, Y)
[Thu May 16 09:20:04 2013] Writing fullrun_pn_xmm0673850201_pi300-10000_pass1_cl_src10.gif
[Thu May 16 09:31:02 2013] Mean detx,y = (-8312.80, -6502.07) 
[Thu May 16 09:31:05 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 09:31:25 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 09:31:26 2013] Setting source spectrum file to fullrun_pn_xmm0673850201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 16 09:31:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673850201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 16 11:46:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 16 11:46:49 2013] rmf not generated due to insufficient counts
[Thu May 16 13:21:02 2013] Updating aperture counts using extracted products
[Thu May 16 13:21:02 2013] Total counts from fullrun_pn_xmm0673850201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 326.00
[Thu May 16 13:21:02 2013] Total counts from fullrun_pn_xmm0673850201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 1423.00
[Thu May 16 13:21:02 2013] Got source and background scale factors 1000092.000000, 9883238.000000
[Thu May 16 13:21:02 2013] User source parameters:
  Position = (202.1, 374.8) = 7 32 56.69 31 41 58.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 182.0 +/- 19.1
  Background aperture counts = 144.0
  Rate = 0.01 +/- 0.001

[Thu May 16 13:21:02 2013] Updating counts from extracted products
[Thu May 16 13:21:02 2013] Set source signif. to 182.01/12.00 = 15.17
[Thu May 16 13:21:05 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 13:21:05 2013] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0673850201_pi300-10000_pass1_cl_src10.arf
[Thu May 16 13:21:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 13:21:05 2013] Updating source flux to 7e-14
[Thu May 16 13:21:20 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 16 13:21:23 2013] xmm0673850201/analysis//spectral/fullrun_pn_xmm0673850201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete