[Thu May 16 00:59:44 2013] Detection parameters:
  Position = (320.0, 315.1) = 7 32 16.50 31 37 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 351.6 +/- 25.6
  Background counts = 18.6
  Rate = 0.02 +/- 0.001

[Thu May 16 00:59:45 2013] Off-axis axis estimate = 1.98'
[Thu May 16 04:28:33 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Thu May 16 04:28:33 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Thu May 16 04:28:33 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.668
[Thu May 16 04:28:33 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.42"
[Thu May 16 05:54:51 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src4.ximg exists
[Thu May 16 05:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src4.csv
[Thu May 16 05:54:51 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May 16 05:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src4.csv
[Thu May 16 05:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:54:53 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May 16 05:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 16 05:54:53 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May 16 05:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu May 16 05:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:55:19 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Thu May 16 05:55:19 2013] Vigneting correction estimate = 1.000000
[Thu May 16 05:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 05:55:19 2013] Assessing source extent using major
[Thu May 16 05:55:19 2013] Source does appear to be extended
[Thu May 16 05:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 07:49:36 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Thu May 16 07:49:36 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Thu May 16 07:49:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 13, frac = 0.668
[Thu May 16 07:49:36 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.42"
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src4.ximg exists
[Thu May 16 09:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src4.csv
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu May 16 09:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src4.csv
[Thu May 16 09:19:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu May 16 09:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu May 16 09:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu May 16 09:19:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 09:19:56 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Thu May 16 09:19:56 2013] Vigneting correction estimate = 1.000000
[Thu May 16 09:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 09:19:56 2013] Assessing source extent using major
[Thu May 16 09:19:56 2013] Source does appear to be extended
[Thu May 16 09:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 12:45:32 2013] XMMSAS src. selection expression = ellipse(27791.943390, 27368.466217, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 16 12:45:32 2013] Writing source region out to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src8_src.reg
[Thu May 16 12:45:32 2013] Extracting stamp from image fullrun_mos2_xmm0673850201_pi300-10000_cl_sm2.00.img.gz, (283, 278) - (358, 353)
[Thu May 16 12:45:32 2013] XMMSAS bgd. selection expression = annulus(27791.943390, 27368.466217, 1087.500000, 2175.000000, X, Y) && !ellipse(26767.683533, 27702.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27907.112000, 28799.884000, 1306.880038, 1306.880038, 0.000000, X, Y) && !ellipse(27521.329529, 29357.093781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25568.562000, 27420.608000, 1122.128032, 1122.128032, 0.000000, X, Y) && !ellipse(28476.168335, 28657.474976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.450000, 27215.614000, 2244.256065, 1044.704030, 78.338200, X, Y) && !ellipse(28294.535126, 29345.963898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26648.485992, 25469.594574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26782.076447, 29885.545502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28311.232605, 25972.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27180.349426, 25539.135101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.673523, 26162.727142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25433.024200, 25381.099792, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 16 12:45:32 2013] Writing fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src8.gif
[Thu May 16 12:49:15 2013] Mean detx,y = (-782.55, -436.08) 
[Thu May 16 12:49:16 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 12:49:25 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 12:49:25 2013] Setting source spectrum file to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu May 16 12:49:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu May 16 13:07:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 16 13:07:15 2013] rmf not generated due to insufficient counts
[Thu May 16 13:21:08 2013] Updating aperture counts using extracted products
[Thu May 16 13:21:08 2013] Total counts from fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 1616.00
[Thu May 16 13:21:09 2013] Total counts from fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src8_bgd.pi.gz = 1152.00
[Thu May 16 13:21:09 2013] Got source and background scale factors 1165928.000000, 2979980.000000
[Thu May 16 13:21:09 2013] User source parameters:
  Position = (320.0, 315.1) = 7 32 16.50 31 37 33.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1165.3 +/- 41.2
  Background aperture counts = 450.7
  Rate = 0.06 +/- 0.002

[Thu May 16 13:21:09 2013] Updating counts from extracted products
[Thu May 16 13:21:09 2013] Set source signif. to 1165.28/21.23 = 54.89
[Thu May 16 13:21:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 13:21:12 2013] Using photon index=1.80, rate=0.0595, arf fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src8.arf
[Thu May 16 13:21:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 13:21:12 2013] Updating source flux to 6e-13
[Thu May 16 13:21:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 16 13:21:20 2013] xmm0673850201/analysis//spectral/fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete