[Thu May 16 00:59:45 2013] Detection parameters:
  Position = (455.8, 271.0) = 7 31 30.30 31 34 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.1 +/- 8.1
  Background counts = 5.3
  Rate = 0.002 +/- 0.0004

[Thu May 16 00:59:45 2013] Off-axis axis estimate = 11.58'
[Thu May 16 04:28:33 2013] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Thu May 16 04:28:33 2013] Initial guess for spatial extent in simple fitting = 12.22"
[Thu May 16 04:28:33 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.959
[Thu May 16 04:28:33 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 12.22"
[Thu May 16 05:54:51 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src30.ximg exists
[Thu May 16 05:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src30.csv
[Thu May 16 05:54:51 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu May 16 05:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src30.csv
[Thu May 16 05:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:54:54 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu May 16 05:54:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu May 16 05:54:54 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu May 16 05:54:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu May 16 05:54:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:55:19 2013] Warning, spatial fit 30 centroid is now closest to src. 27
[Thu May 16 05:55:19 2013] Vigneting correction estimate = 1.000000
[Thu May 16 05:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 05:55:19 2013] Assessing source extent using major
[Thu May 16 05:55:19 2013] Source does appear to be extended
[Thu May 16 05:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 07:49:36 2013] Using EEF radius (= 12.22 ")to estimate initial spatial extent for simple fitting
[Thu May 16 07:49:36 2013] Initial guess for spatial extent in simple fitting = 12.22"
[Thu May 16 07:49:36 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.959
[Thu May 16 07:49:36 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 12.22"
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src29.ximg exists
[Thu May 16 09:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src29.csv
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu May 16 09:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src29.csv
[Thu May 16 09:19:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 09:19:39 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu May 16 09:19:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu May 16 09:19:39 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu May 16 09:19:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Thu May 16 09:19:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 09:19:56 2013] Spatial fit model total counts = 113.900000, observed total counts = 97.000000
[Thu May 16 09:19:56 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 09:19:56 2013] Vigneting correction estimate = 1.000000
[Thu May 16 09:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 09:19:56 2013] Assessing source extent using major
[Thu May 16 09:19:56 2013] Source does appear to be extended
[Thu May 16 09:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 12:45:32 2013] XMMSAS src. selection expression = ellipse(39602.257111, 23524.788269, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 16 12:45:32 2013] Writing source region out to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src34_src.reg
[Thu May 16 12:45:32 2013] Extracting stamp from image fullrun_mos2_xmm0673850201_pi300-10000_cl_sm2.00.img.gz, (418, 233) - (493, 308)
[Thu May 16 12:45:32 2013] XMMSAS bgd. selection expression = annulus(39602.257111, 23524.788269, 1087.500000, 2175.000000, X, Y) && !ellipse(39390.061859, 25564.272919, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 16 12:45:32 2013] Writing fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src34.gif
[Thu May 16 12:54:21 2013] Mean detx,y = (-11852.47, -6180.49) 
[Thu May 16 12:54:22 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 12:54:38 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 12:54:38 2013] Setting source spectrum file to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu May 16 12:54:38 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Thu May 16 13:20:30 2013] Not generating rmf since there are only 36 counts
[Thu May 16 13:20:30 2013] rmf not generated due to insufficient counts
[Thu May 16 13:21:12 2013] Updating aperture counts using extracted products
[Thu May 16 13:21:12 2013] Total counts from fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 70.00
[Thu May 16 13:21:12 2013] Total counts from fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src34_bgd.pi.gz = 226.00
[Thu May 16 13:21:12 2013] Got source and background scale factors 1149474.000000, 8709268.000000
[Thu May 16 13:21:12 2013] User source parameters:
  Position = (455.8, 271.0) = 7 31 30.30 31 34 25.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 40.2 +/- 9.4
  Background aperture counts = 29.8
  Rate = 0.002 +/- 0.0005

[Thu May 16 13:21:12 2013] Updating counts from extracted products
[Thu May 16 13:21:12 2013] Set source signif. to 40.17/5.46 = 7.36
[Thu May 16 13:21:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 13:21:12 2013] Using photon index=1.80, rate=0.00205, arf fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src34.arf
[Thu May 16 13:21:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 13:21:12 2013] Updating source flux to 4.6e-14
[Thu May 16 13:21:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 16 13:21:20 2013] xmm0673850201/analysis//spectral/fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete