[Thu May 16 00:59:44 2013] Detection parameters:
  Position = (404.2, 150.8) = 7 31 47.90 31 25 41.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.3 +/- 8.1
  Background counts = 5.3
  Rate = 0.002 +/- 0.0004

[Thu May 16 00:59:45 2013] Off-axis axis estimate = 13.17'
[Thu May 16 04:28:33 2013] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Thu May 16 04:28:33 2013] Initial guess for spatial extent in simple fitting = 13.01"
[Thu May 16 04:28:33 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Thu May 16 04:28:33 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 13.01"
[Thu May 16 05:54:52 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src32.ximg exists
[Thu May 16 05:54:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src32.csv
[Thu May 16 05:54:52 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu May 16 05:54:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src32.csv
[Thu May 16 05:54:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:54:54 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu May 16 05:54:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu May 16 05:54:54 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu May 16 05:54:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src32.csv
[Thu May 16 05:54:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:55:19 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.453864 pixels away
[Thu May 16 05:55:20 2013] Vigneting correction estimate = 1.000000
[Thu May 16 05:55:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 05:55:20 2013] Assessing source extent using major
[Thu May 16 05:55:20 2013] Source does appear to be extended
[Thu May 16 05:55:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 07:49:36 2013] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Thu May 16 07:49:36 2013] Initial guess for spatial extent in simple fitting = 13.01"
[Thu May 16 07:49:36 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Thu May 16 07:49:36 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 13.01"
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src30.ximg exists
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu May 16 09:19:38 2013] Fit fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src30 appears to have run properly
[Thu May 16 09:19:39 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu May 16 09:19:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src30.csv
[Thu May 16 09:19:39 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu May 16 09:19:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src30.csv
[Thu May 16 09:19:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 09:19:56 2013] Spatial fit model total counts = 90.272000, observed total counts = 85.000000
[Thu May 16 09:19:56 2013] Offset between fit and detection position for source 10 = 0.195968 pixels
[Thu May 16 09:19:56 2013] 89.254700 total counts/ 49.393600 bgd. counts: snr = 5.671709
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.195968 pixels
  Position = (404.4, 150.9) = 7 31 47.85 31 25 43.2
  Extent = 16.8 (10.7-24.2)" x 5.4 (3.5-7.1)", rotation angle = 133 (120-144) degrees
  Source counts = 39.9 +/- 9.4
  Background counts = 49.4
  Rate = 0.002 +/- 0.0005
[Thu May 16 09:19:56 2013] Vigneting correction estimate = 1.000000
[Thu May 16 09:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 09:19:56 2013] Assessing source extent using major axis lower bound
[Thu May 16 09:19:56 2013] Source does appear to be extended
[Thu May 16 09:19:56 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.52
[Thu May 16 09:19:56 2013] Source is asymmetric
[Thu May 16 12:45:32 2013] XMMSAS src. selection expression = ellipse(35130.933600, 13081.758780, 1006.710029, 322.437609, 132.571986, X, Y)
[Thu May 16 12:45:32 2013] Writing source region out to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src10_src.reg
[Thu May 16 12:45:32 2013] Extracting stamp from image fullrun_mos2_xmm0673850201_pi300-10000_cl_sm2.00.img.gz, (347, 93) - (462, 209)
[Thu May 16 12:45:32 2013] XMMSAS bgd. selection expression = annulus(35130.933600, 13081.758780, 1677.850048, 3355.700097, X, Y)
[Thu May 16 12:45:32 2013] Writing fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src10.gif
[Thu May 16 12:54:40 2013] Mean detx,y = (-5760.89, -15746.14) 
[Thu May 16 12:54:41 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 12:55:01 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 12:55:02 2013] Setting source spectrum file to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 16 12:55:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 16 13:20:37 2013] Not generating rmf since there are only 39 counts
[Thu May 16 13:20:37 2013] rmf not generated due to insufficient counts
[Thu May 16 13:21:12 2013] Updating aperture counts using extracted products
[Thu May 16 13:21:12 2013] Total counts from fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 44.00
[Thu May 16 13:21:12 2013] Total counts from fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src10_bgd.pi.gz = 415.00
[Thu May 16 13:21:12 2013] Got source and background scale factors 811196.000000, 14493693.000000
[Thu May 16 13:21:12 2013] User source parameters:
  Position = (404.4, 150.9) = 7 31 47.85 31 25 43.2
  Extent = 16.8 (10.7-24.2)" x 5.4 (3.5-7.1)", rotation angle = 133 (120-144) degrees
  Source aperture counts = 20.8 +/- 7.7
  Background aperture counts = 23.2
  Rate = 0.001 +/- 0.0004

[Thu May 16 13:21:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 13:21:12 2013] Using photon index=1.80, rate=0.00204, arf fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src10.arf
[Thu May 16 13:21:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 13:21:12 2013] Updating source flux to 6.3e-14
[Thu May 16 13:21:16 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 16 13:21:20 2013] xmm0673850201/analysis//spectral/fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete