[Thu May 16 00:59:44 2013] Detection parameters:
  Position = (308.2, 319.0) = 7 32 20.51 31 37 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2182.2 +/- 56.7
  Background counts = 20.7
  Rate = 0.1 +/- 0.003

[Thu May 16 00:59:45 2013] Off-axis axis estimate = 1.65'
[Thu May 16 04:28:33 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu May 16 04:28:33 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Thu May 16 04:28:33 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Thu May 16 04:28:33 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Thu May 16 05:54:51 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 16 05:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src1.csv
[Thu May 16 05:54:51 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 16 05:54:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src1.csv
[Thu May 16 05:54:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:54:53 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 16 05:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 16 05:54:53 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 16 05:54:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu May 16 05:54:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:55:19 2013] Warning, spatial fit 1 centroid is now closest to src. 2
[Thu May 16 05:55:19 2013] Spatial fit model total counts = 3941.750000, observed total counts = 3230.000000
[Thu May 16 05:55:19 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 05:55:19 2013] Spatial fit model total counts = 3300.490000, observed total counts = 2651.000000
[Thu May 16 05:55:19 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 05:55:19 2013] Vigneting correction estimate = 1.000000
[Thu May 16 05:55:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 05:55:19 2013] Assessing source extent using major
[Thu May 16 05:55:19 2013] Source does appear to be extended
[Thu May 16 05:55:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 07:49:36 2013] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Thu May 16 07:49:36 2013] Initial guess for spatial extent in simple fitting = 7.25"
[Thu May 16 07:49:36 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Thu May 16 07:49:36 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.25"
[Thu May 16 09:19:37 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 16 09:19:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src1.csv
[Thu May 16 09:19:37 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 16 09:19:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src1.csv
[Thu May 16 09:19:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 16 09:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 16 09:19:38 2013] fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 16 09:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu May 16 09:19:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 09:19:56 2013] Source 1 is offset by -1.222702 and 2.527494 pixels which is larger than
2 X fitted extent = 1.567954 x 1.567954, not incorporating fit results
[Thu May 16 09:19:56 2013] Spatial fit model total counts = 3477.170000, observed total counts = 2948.000000
[Thu May 16 09:19:56 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 09:19:56 2013] Spatial fit model total counts = 3298.420000, observed total counts = 2651.000000
[Thu May 16 09:19:56 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 09:19:56 2013] Vigneting correction estimate = 1.000000
[Thu May 16 09:19:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 09:19:56 2013] Assessing source extent using major
[Thu May 16 09:19:56 2013] Source does appear to be extended
[Thu May 16 09:19:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 12:45:32 2013] Counts = 2182.165527, rescaling region sizes by 2.000000
[Thu May 16 12:45:32 2013] XMMSAS src. selection expression = ellipse(26767.683533, 27702.829987, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May 16 12:45:32 2013] Writing source region out to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src1_src.reg
[Thu May 16 12:45:32 2013] Extracting stamp from image fullrun_mos2_xmm0673850201_pi300-10000_cl_sm2.00.img.gz, (233, 244) - (383, 394)
[Thu May 16 12:45:32 2013] XMMSAS bgd. selection expression = annulus(26767.683533, 27702.829987, 4350.000000, 8700.000000, X, Y) && !ellipse(27907.112000, 28799.884000, 1306.880038, 1306.880038, 0.000000, X, Y) && !ellipse(20965.985400, 31630.784600, 429.524012, 327.616009, 326.254130, X, Y) && !ellipse(27791.943390, 27368.466217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25153.166600, 32832.559200, 579.458417, 232.749607, 357.544855, X, Y) && !ellipse(27521.329529, 29357.093781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25568.562000, 27420.608000, 1122.128032, 1122.128032, 0.000000, X, Y) && !ellipse(35131.490448, 33495.846375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28476.168335, 28657.474976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24655.450000, 27215.614000, 2244.256065, 1044.704030, 78.338200, X, Y) && !ellipse(28294.535126, 29345.963898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26648.485992, 25469.594574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26782.076447, 29885.545502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28311.232605, 25972.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27180.349426, 25539.135101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24373.834778, 28068.225739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24921.673523, 26162.727142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33265.122940, 31040.159200, 747.766422, 747.766422, 0.000000, X, Y) && !ellipse(25433.024200, 25381.099792, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 16 12:45:32 2013] Writing fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src1.gif
[Thu May 16 12:45:36 2013] Mean detx,y = (79.65, -16.65) 
[Thu May 16 12:45:37 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 12:48:47 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 12:48:47 2013] Setting source spectrum file to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 16 12:48:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 16 12:55:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 16 12:55:04 2013] rmf not generated due to insufficient counts
[Thu May 16 13:21:08 2013] Updating aperture counts using extracted products
[Thu May 16 13:21:08 2013] Total counts from fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 10867.00
[Thu May 16 13:21:08 2013] Total counts from fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 7442.00
[Thu May 16 13:21:08 2013] Got source and background scale factors 5002848.000000, 161226357.000000
[Thu May 16 13:21:08 2013] User source parameters:
  Position = (308.2, 319.0) = 7 32 20.51 31 37 54.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 10636.1 +/- 105.2
  Background aperture counts = 230.9
  Rate = 0.5 +/- 0.005

[Thu May 16 13:21:08 2013] Updating counts from extracted products
[Thu May 16 13:21:08 2013] Set source signif. to 10636.08/15.20 = 699.92
[Thu May 16 13:21:12 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 13:21:12 2013] Using photon index=1.80, rate=0.543, arf fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src1.arf
[Thu May 16 13:21:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 13:21:12 2013] Updating source flux to 5.2e-12
[Thu May 16 13:21:16 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 16 13:21:20 2013] xmm0673850201/analysis//spectral/fullrun_mos2_xmm0673850201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete