[Thu May 16 00:58:56 2013] Detection parameters:
  Position = (306.0, 337.4) = 7 32 21.26 31 39 12.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.9 +/- 17.2
  Background counts = 17.0
  Rate = 0.009 +/- 0.001

[Thu May 16 00:58:57 2013] Off-axis axis estimate = 2.88'
[Thu May 16 02:42:01 2013] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Thu May 16 02:42:01 2013] Initial guess for spatial extent in simple fitting = 7.87"
[Thu May 16 02:42:01 2013] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.610
[Thu May 16 02:42:01 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.87"
[Thu May 16 04:28:32 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 16 04:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src5.csv
[Thu May 16 04:28:32 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 16 04:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src5.csv
[Thu May 16 04:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 04:28:33 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 16 04:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 16 04:28:33 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 16 04:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu May 16 04:28:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:55:13 2013] Warning, spatial fit 5 centroid is now closest to src. 21
[Thu May 16 05:55:13 2013] Source 7 is offset by 2.755328 and 4.635831 pixels which is larger than
2 X fitted extent = 7.270391 x 3.093761, not incorporating fit results
[Thu May 16 05:55:13 2013] Vigneting correction estimate = 1.000000
[Thu May 16 05:55:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 05:55:13 2013] Assessing source extent using major
[Thu May 16 05:55:13 2013] Source does appear to be extended
[Thu May 16 05:55:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 05:55:13 2013] Source is confused with source 21
[Thu May 16 05:55:13 2013] Source is confused with source 20
[Thu May 16 06:48:44 2013] Using EEF radius (= 7.87 ")to estimate initial spatial extent for simple fitting
[Thu May 16 06:48:44 2013] Initial guess for spatial extent in simple fitting = 7.87"
[Thu May 16 06:48:44 2013] source mask rpix=1.8, npix_max = 21, mask sum = 13, frac = 0.610
[Thu May 16 06:48:44 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 7.87"
[Thu May 16 07:49:35 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 16 07:49:35 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 16 07:49:35 2013] Fit fullrun_mos1_xmm0673850201_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu May 16 07:49:36 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 16 07:49:36 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 16 07:49:36 2013] Fit fullrun_mos1_xmm0673850201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu May 16 09:19:50 2013] Source 7 is offset by -1.030983 and 6.598820 pixels which is larger than
2 X fitted extent = 7.233425 x 3.670267, not incorporating fit results
[Thu May 16 09:19:50 2013] Source 7 is offset by 2.766063 and 4.635831 pixels which is larger than
2 X fitted extent = 7.270391 x 3.206437, not incorporating fit results
[Thu May 16 09:19:50 2013] Source 7 is offset by -3.878465 and 1.752636 pixels which is larger than
2 X fitted extent = 0.933416 x 0.933416, not incorporating fit results
[Thu May 16 09:19:50 2013] Vigneting correction estimate = 1.000000
[Thu May 16 09:19:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 09:19:50 2013] Assessing source extent using major
[Thu May 16 09:19:50 2013] Source does appear to be extended
[Thu May 16 09:19:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 12:07:47 2013] XMMSAS src. selection expression = ellipse(26576.197510, 29302.291321, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 16 12:07:47 2013] Writing source region out to fullrun_mos1_xmm0673850201_pi300-10000_pass1_cl_src7_src.reg
[Thu May 16 12:07:47 2013] Extracting stamp from image fullrun_mos1_xmm0673850201_pi300-10000_cl_sm2.00.img.gz, (269, 300) - (344, 375)
[Thu May 16 12:07:47 2013] XMMSAS bgd. selection expression = annulus(26576.197510, 29302.291321, 1087.500000, 2175.000000, X, Y) && !ellipse(26747.178750, 27701.209120, 1155.000033, 1155.000033, 0.000000, X, Y) && !ellipse(26073.167694, 29459.182312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28552.752655, 27005.497162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26581.459778, 29709.559540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27252.101593, 29780.087738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25343.499268, 29258.531128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28893.727448, 27704.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24755.614716, 28212.470825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.176000, 26540.806000, 1130.648033, 1130.648033, 0.000000, X, Y)
[Thu May 16 12:07:47 2013] Writing fullrun_mos1_xmm0673850201_pi300-10000_pass1_cl_src7.gif
[Thu May 16 12:13:35 2013] Mean detx,y = (1669.57, -150.58) 
[Thu May 16 12:13:36 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 12:13:46 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 12:13:47 2013] Setting source spectrum file to fullrun_mos1_xmm0673850201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu May 16 12:13:47 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673850201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu May 16 12:43:44 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 16 12:43:44 2013] rmf not generated due to insufficient counts
[Thu May 16 13:21:06 2013] Updating aperture counts using extracted products
[Thu May 16 13:21:06 2013] Total counts from fullrun_mos1_xmm0673850201_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 834.00
[Thu May 16 13:21:06 2013] Total counts from fullrun_mos1_xmm0673850201_pi300-10000_pass1_cl_src7_bgd.pi.gz = 1390.00
[Thu May 16 13:21:06 2013] Got source and background scale factors 1244080.000000, 4883736.000000
[Thu May 16 13:21:06 2013] User source parameters:
  Position = (306.0, 337.4) = 7 32 21.26 31 39 12.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 479.9 +/- 29.9
  Background aperture counts = 354.1
  Rate = 0.02 +/- 0.002

[Thu May 16 13:21:06 2013] Updating counts from extracted products
[Thu May 16 13:21:06 2013] Set source signif. to 479.91/18.82 = 25.50
[Thu May 16 13:21:08 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 16 13:21:08 2013] Using photon index=1.80, rate=0.0245, arf fullrun_mos1_xmm0673850201_pi300-10000_pass1_cl_src7.arf
[Thu May 16 13:21:08 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 16 13:21:08 2013] Updating source flux to 3.2e-13
[Thu May 16 13:21:13 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 16 13:21:16 2013] xmm0673850201/analysis//spectral/fullrun_mos1_xmm0673850201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete