[Thu May 16 00:58:56 2013] Detection parameters:
  Position = (383.5, 357.3) = 7 31 54.86 31 40 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.4 +/- 7.7
  Background counts = 9.7
  Rate = 0.002 +/- 0.0005

[Thu May 16 00:58:57 2013] Off-axis axis estimate = 7.50'
[Thu May 16 02:42:01 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Thu May 16 02:42:01 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Thu May 16 02:42:01 2013] source mask rpix=2.3, npix_max = 32, mask sum = 24, frac = 0.744
[Thu May 16 02:42:01 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 10.18"
[Thu May 16 04:28:32 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src29.ximg exists
[Thu May 16 04:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src29.csv
[Thu May 16 04:28:32 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu May 16 04:28:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src29.csv
[Thu May 16 04:28:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 04:28:33 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu May 16 04:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu May 16 04:28:33 2013] fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu May 16 04:28:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu May 16 04:28:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673850201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 05:55:13 2013] Warning, spatial fit 29 centroid is now closest to src. 15
[Thu May 16 05:55:13 2013] Spatial fit model total counts = 136.930000, observed total counts = 112.000000
[Thu May 16 05:55:13 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 05:55:13 2013] Vigneting correction estimate = 1.000000
[Thu May 16 05:55:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 05:55:13 2013] Assessing source extent using major
[Thu May 16 05:55:13 2013] Source does appear to be extended
[Thu May 16 05:55:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 05:55:13 2013] Deleting source due to low Poisson probability 0.9