[Fri May 24 02:11:32 2013] Detection parameters:
  Position = (353.0, 443.9) = 6 39 20.62 9 33 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.6 +/- 18.2
  Background counts = 44.4
  Rate = 0.003 +/- 0.0004

[Fri May 24 02:11:32 2013] Off-axis axis estimate = 11.27'
[Fri May 24 02:17:01 2013] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Fri May 24 02:17:01 2013] Initial guess for spatial extent in simple fitting = 12.06"
[Fri May 24 02:17:01 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.840
[Fri May 24 02:17:01 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 12.06"
[Fri May 24 04:15:32 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src63.ximg exists
[Fri May 24 04:15:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src63.csv
[Fri May 24 04:15:32 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src63_1.ximg exists
[Fri May 24 04:15:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src63.csv
[Fri May 24 04:15:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 04:15:32 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Fri May 24 04:15:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Fri May 24 04:15:32 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Fri May 24 04:15:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src63.csv
[Fri May 24 04:15:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 07:17:24 2013] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 15.681954 pixels away
[Fri May 24 07:17:24 2013] Vigneting correction estimate = 1.000000
[Fri May 24 07:17:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 07:17:24 2013] Assessing source extent using major
[Fri May 24 07:17:24 2013] Source does appear to be extended
[Fri May 24 07:17:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 07:18:14 2013] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Fri May 24 07:18:14 2013] Initial guess for spatial extent in simple fitting = 12.06"
[Fri May 24 07:18:14 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.840
[Fri May 24 07:18:14 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 12.06"
[Fri May 24 09:25:19 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src63.ximg exists
[Fri May 24 09:25:19 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src63.csv
[Fri May 24 09:25:19 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri May 24 09:25:19 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src63.csv
[Fri May 24 09:25:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 09:25:20 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri May 24 09:25:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri May 24 09:25:20 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri May 24 09:25:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src63.csv
[Fri May 24 09:25:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 11:47:00 2013] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 64 at 15.681954 pixels away
[Fri May 24 11:47:00 2013] Vigneting correction estimate = 1.000000
[Fri May 24 11:47:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 11:47:00 2013] Assessing source extent using major
[Fri May 24 11:47:00 2013] Source does appear to be extended
[Fri May 24 11:47:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 11:47:31 2013] XMMSAS src. selection expression = ellipse(30664.114258, 38575.129822, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 24 11:47:31 2013] Writing source region out to fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src64_src.reg
[Fri May 24 11:47:31 2013] Extracting stamp from image fullrun_pn_xmm0673820101_pi300-10000_cl_sm2.00.img.gz, (316, 406) - (391, 481)
[Fri May 24 11:47:31 2013] XMMSAS bgd. selection expression = annulus(30664.114258, 38575.129822, 1087.500000, 2175.000000, X, Y) && !ellipse(32748.577759, 36292.386078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27789.620239, 38172.486664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29272.278870, 35806.823700, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 24 11:47:31 2013] Writing fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src64.gif
[Fri May 24 12:53:35 2013] Mean detx,y = (-6089.12, 13958.15) 
[Fri May 24 12:53:42 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 12:54:06 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 12:54:07 2013] Setting source spectrum file to fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Fri May 24 12:54:07 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Fri May 24 13:48:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 24 13:48:37 2013] rmf not generated due to insufficient counts
[Fri May 24 15:16:30 2013] Updating aperture counts using extracted products
[Fri May 24 15:16:30 2013] Total counts from fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src64_src_b10.pi.gz = 424.00
[Fri May 24 15:16:30 2013] Total counts from fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src64_bgd.pi.gz = 1584.00
[Fri May 24 15:16:30 2013] Got source and background scale factors 1115321.000000, 3940095.000000
[Fri May 24 15:16:30 2013] User source parameters:
  Position = (353.0, 443.9) = 6 39 20.62 9 33 57.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -24.4 +/- 21.6
  Background aperture counts = 448.4
  Rate = -0.0005 +/- 0.0004

[Fri May 24 15:16:30 2013] Updating counts from extracted products
[Fri May 24 15:16:30 2013] Set source signif. to -24.38/21.18 = -1.15
[Fri May 24 15:16:32 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 15:16:32 2013] Using photon index=1.80, rate=-0.000469, arf fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src64.arf
[Fri May 24 15:16:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 15:16:32 2013] Updated flux is not positive, keeping original flux
[Fri May 24 15:17:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 24 15:17:28 2013] xmm0673820101/analysis//spectral/fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src64_pl.csv not found, spectral fit skipped or did not complete