[Fri May 24 02:11:30 2013] Detection parameters:
  Position = (497.0, 255.9) = 6 38 38.32 9 20 23.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.0 +/- 14.8
  Background counts = 42.5
  Rate = 0.002 +/- 0.0003

[Fri May 24 02:11:32 2013] Off-axis axis estimate = 14.72'
[Fri May 24 02:17:01 2013] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Fri May 24 02:17:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 02:17:01 2013] Initial guess for spatial extent in simple fitting = 13.79"
[Fri May 24 02:17:01 2013] source mask rpix=3.2, npix_max = 53, mask sum = 40, frac = 0.743
[Fri May 24 02:17:01 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 13.79"
[Fri May 24 04:15:31 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src23.ximg exists
[Fri May 24 04:15:31 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src23.csv
[Fri May 24 04:15:31 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri May 24 04:15:31 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src23.csv
[Fri May 24 04:15:31 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 04:15:32 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri May 24 04:15:32 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri May 24 04:15:32 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri May 24 04:15:32 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri May 24 04:15:32 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 07:17:23 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 17.892607 pixels away
[Fri May 24 07:17:24 2013] Vigneting correction estimate = 1.000000
[Fri May 24 07:17:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 07:17:24 2013] Assessing source extent using major
[Fri May 24 07:17:24 2013] Source does appear to be extended
[Fri May 24 07:17:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 07:18:14 2013] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Fri May 24 07:18:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 07:18:14 2013] Initial guess for spatial extent in simple fitting = 13.79"
[Fri May 24 07:18:14 2013] source mask rpix=3.2, npix_max = 53, mask sum = 40, frac = 0.743
[Fri May 24 07:18:14 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 13.79"
[Fri May 24 09:25:18 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 24 09:25:18 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src23.csv
[Fri May 24 09:25:18 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 24 09:25:18 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src23.csv
[Fri May 24 09:25:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 09:25:19 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 24 09:25:19 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 24 09:25:19 2013] fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 24 09:25:19 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 24 09:25:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 11:47:00 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 12.145630 pixels away
[Fri May 24 11:47:00 2013] Vigneting correction estimate = 1.000000
[Fri May 24 11:47:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 11:47:00 2013] Assessing source extent using major
[Fri May 24 11:47:00 2013] Source does appear to be extended
[Fri May 24 11:47:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 11:47:30 2013] XMMSAS src. selection expression = ellipse(43188.806091, 22218.585541, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 24 11:47:30 2013] Writing source region out to fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src24_src.reg
[Fri May 24 11:47:30 2013] Extracting stamp from image fullrun_pn_xmm0673820101_pi300-10000_cl_sm2.00.img.gz, (459, 218) - (534, 293)
[Fri May 24 11:47:30 2013] XMMSAS bgd. selection expression = annulus(43188.806091, 22218.585541, 1087.500000, 2175.000000, X, Y)
[Fri May 24 11:47:30 2013] Writing fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src24.gif
[Fri May 24 12:19:05 2013] Mean detx,y = (-18027.32, -2632.60) 
[Fri May 24 12:19:10 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 12:19:45 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 12:19:45 2013] Setting source spectrum file to fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri May 24 12:19:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri May 24 13:20:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 24 13:20:28 2013] rmf not generated due to insufficient counts
[Fri May 24 15:16:19 2013] Updating aperture counts using extracted products
[Fri May 24 15:16:19 2013] Total counts from fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 285.00
[Fri May 24 15:16:19 2013] Total counts from fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 1267.00
[Fri May 24 15:16:19 2013] Got source and background scale factors 693744.000000, 5277459.000000
[Fri May 24 15:16:19 2013] User source parameters:
  Position = (497.0, 255.9) = 6 38 38.32 9 20 23.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 118.4 +/- 17.9
  Background aperture counts = 166.6
  Rate = 0.002 +/- 0.0003

[Fri May 24 15:16:19 2013] Updating counts from extracted products
[Fri May 24 15:16:19 2013] Set source signif. to 118.45/12.91 = 9.18
[Fri May 24 15:16:31 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 15:16:31 2013] Using photon index=1.80, rate=0.00228, arf fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src24.arf
[Fri May 24 15:16:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 15:16:31 2013] Getting flux using calc_pl_flux failed
[Fri May 24 15:17:12 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 24 15:17:28 2013] xmm0673820101/analysis//spectral/fullrun_pn_xmm0673820101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete