[Fri May 24 02:12:37 2013] Detection parameters:
  Position = (277.0, 119.4) = 6 39 42.96 9 10 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 12.2
  Background counts = 19.1
  Rate = 0.001 +/- 0.0002

[Fri May 24 02:12:38 2013] Off-axis axis estimate = 13.07'
[Fri May 24 05:35:55 2013] Using EEF radius (= 12.96 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:35:55 2013] Initial guess for spatial extent in simple fitting = 12.96"
[Fri May 24 05:35:55 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.011
[Fri May 24 05:35:55 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 12.96"
[Fri May 24 07:17:02 2013] fullrun_mos2_xmm0673820101_pi300-10000_cl_pass0_src35.ximg exists
[Fri May 24 07:17:02 2013] fullrun_mos2_xmm0673820101_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri May 24 07:17:02 2013] Fit fullrun_mos2_xmm0673820101_pi300-10000_cl_pass0_src35 appears to have run properly
[Fri May 24 07:17:03 2013] fullrun_mos2_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri May 24 07:17:03 2013] fullrun_mos2_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri May 24 07:17:03 2013] Fit fullrun_mos2_xmm0673820101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri May 24 07:17:49 2013] Spatial fit model total counts = 311.559000, observed total counts = 293.000000
[Fri May 24 07:17:49 2013] Offset between fit and detection position for source 11 = 0.612660 pixels
[Fri May 24 07:17:49 2013] 312.608900 total counts/ 239.391000 bgd. counts: snr = 4.732203
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.612660 pixels
  Position = (277.6, 119.3) = 6 39 42.78 9 10 25.7
  Extent = 15.9 (6.3-25.9)" x 6.2 (3.2-10.9)", rotation angle = 18 (357-43) degrees
  Source counts = 73.2 +/- 17.7
  Background counts = 239.4
  Rate = 0.001 +/- 0.0003
[Fri May 24 07:17:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 07:17:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 07:17:49 2013] Assessing source extent using major axis lower bound
[Fri May 24 07:17:49 2013] Source does appear to be extended
[Fri May 24 07:17:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.58
[Fri May 24 10:22:31 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 10:22:31 2013] Initial guess for spatial extent in simple fitting = 11.04"
[Fri May 24 10:22:31 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.974
[Fri May 24 10:22:31 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 11.04"
[Fri May 24 11:46:47 2013] fullrun_mos2_xmm0673820101_pi300-10000_cl_pass1_src35.ximg exists
[Fri May 24 11:46:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673820101_pi300-10000_cl_pass1_src35.csv
[Fri May 24 11:46:47 2013] fullrun_mos2_xmm0673820101_pi300-10000_cl_pass1_src35_1.ximg exists
[Fri May 24 11:46:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673820101_pi300-10000_cl_pass1_src35.csv
[Fri May 24 11:46:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673820101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673820101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 11:46:48 2013] fullrun_mos2_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Fri May 24 11:46:48 2013] fullrun_mos2_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Fri May 24 11:46:48 2013] Fit fullrun_mos2_xmm0673820101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Fri May 24 11:47:15 2013] Spatial fit model total counts = 277.256000, observed total counts = 252.000000
[Fri May 24 11:47:15 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 11:47:15 2013] Vigneting correction estimate = 1.000000
[Fri May 24 11:47:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 11:47:15 2013] Assessing source extent using major axis lower bound
[Fri May 24 11:47:15 2013] Source does appear to be extended
[Fri May 24 11:47:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.58
[Fri May 24 14:32:16 2013] XMMSAS src. selection expression = ellipse(24105.793800, 10328.543600, 954.558027, 370.835411, 18.254226, X, Y)
[Fri May 24 14:32:16 2013] Writing source region out to fullrun_mos2_xmm0673820101_pi300-10000_pass1_cl_src11_src.reg
[Fri May 24 14:32:16 2013] Extracting stamp from image fullrun_mos2_xmm0673820101_pi300-10000_cl_sm2.00.img.gz, (223, 64) - (332, 174)
[Fri May 24 14:32:16 2013] XMMSAS bgd. selection expression = annulus(24105.793800, 10328.543600, 1590.930046, 3181.860092, X, Y) && !ellipse(21299.058624, 14241.800919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23228.398000, 12036.766000, 681.682420, 478.068014, 223.385000, X, Y) && !ellipse(24056.846000, 13542.068000, 1912.272055, 1912.272055, 0.000000, X, Y)
[Fri May 24 14:32:16 2013] Writing fullrun_mos2_xmm0673820101_pi300-10000_pass1_cl_src11.gif
[Fri May 24 14:41:35 2013] Mean detx,y = (-865.73, 13932.58) 
[Fri May 24 14:41:36 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 14:42:07 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 14:42:07 2013] Setting source spectrum file to fullrun_mos2_xmm0673820101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri May 24 14:42:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673820101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri May 24 15:08:47 2013] Not generating rmf since there are only 73 counts
[Fri May 24 15:08:47 2013] rmf not generated due to insufficient counts
[Fri May 24 15:16:47 2013] Updating aperture counts using extracted products
[Fri May 24 15:16:47 2013] Total counts from fullrun_mos2_xmm0673820101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 177.00
[Fri May 24 15:16:47 2013] Total counts from fullrun_mos2_xmm0673820101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 1481.00
[Fri May 24 15:16:47 2013] Got source and background scale factors 1083448.000000, 16547647.000000
[Fri May 24 15:16:47 2013] User source parameters:
  Position = (277.6, 119.3) = 6 39 42.78 9 10 25.7
  Extent = 15.9 (6.3-25.9)" x 6.2 (3.2-10.9)", rotation angle = 18 (357-43) degrees
  Source aperture counts = 80.0 +/- 14.3
  Background aperture counts = 97.0
  Rate = 0.001 +/- 0.0003

[Fri May 24 15:16:55 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 15:16:55 2013] Using photon index=1.80, rate=0.00137, arf fullrun_mos2_xmm0673820101_pi300-10000_pass1_cl_src11.arf
[Fri May 24 15:16:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 15:16:55 2013] Updating source flux to 5.2e-14
[Fri May 24 15:17:06 2013] Flag p found in src. 11 procflags, skipping spectral fitting
[Fri May 24 15:17:06 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 24 15:17:12 2013] xmm0673820101/analysis//spectral/fullrun_mos2_xmm0673820101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete