[Sat May 11 23:57:40 2013] Detection parameters:
  Position = (291.1, 424.8) = 19 24 48.30 59 49 23.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.3 +/- 15.2
  Background counts = 8.0
  Rate = 0.02 +/- 0.002

[Sat May 11 23:57:41 2013] Off-axis axis estimate = 9.18'
[Sat May 11 23:59:08 2013] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Sat May 11 23:59:08 2013] Initial guess for spatial extent in simple fitting = 11.02"
[Sat May 11 23:59:08 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Sat May 11 23:59:08 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.02"
[Sun May 12 00:34:18 2013] fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_src10.ximg exists
[Sun May 12 00:34:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_src10.csv
[Sun May 12 00:34:18 2013] fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun May 12 00:34:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_src10.csv
[Sun May 12 00:34:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 00:34:19 2013] fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun May 12 00:34:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May 12 00:34:19 2013] fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun May 12 00:34:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sun May 12 00:34:19 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673800901_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 01:30:17 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 13.486325 pixels away
[Sun May 12 01:30:17 2013] Vigneting correction estimate = 1.000000
[Sun May 12 01:30:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 01:30:17 2013] Assessing source extent using major
[Sun May 12 01:30:17 2013] Source does appear to be extended
[Sun May 12 01:30:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 01:30:39 2013] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Sun May 12 01:30:39 2013] Initial guess for spatial extent in simple fitting = 11.02"
[Sun May 12 01:30:39 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Sun May 12 01:30:39 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 11.02"
[Sun May 12 02:16:53 2013] fullrun_pn_xmm0673800901_pi300-10000_cl_pass1_src10.ximg exists
[Sun May 12 02:16:53 2013] fullrun_pn_xmm0673800901_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun May 12 02:16:53 2013] Fit fullrun_pn_xmm0673800901_pi300-10000_cl_pass1_src10 appears to have run properly
[Sun May 12 02:16:54 2013] fullrun_pn_xmm0673800901_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun May 12 02:16:54 2013] fullrun_pn_xmm0673800901_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun May 12 02:16:54 2013] Fit fullrun_pn_xmm0673800901_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun May 12 03:10:47 2013] Spatial fit model total counts = 239.020000, observed total counts = 221.000000
[Sun May 12 03:10:47 2013] Offset between fit and detection position for source 10 = 0.198576 pixels
[Sun May 12 03:10:47 2013] 239.246900 total counts/ 147.822000 bgd. counts: snr = 7.519604
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.198576 pixels
  Position = (290.9, 424.8) = 19 24 48.41 59 49 22.9
  Extent = 5.7 (4.3-7.6)" x 3.8 (3.0-4.8)", rotation angle = 329 (300-357) degrees
  Source counts = 91.4 +/- 15.5
  Background counts = 147.8
  Rate = 0.01 +/- 0.002
[Sun May 12 03:10:47 2013] Vigneting correction estimate = 1.000000
[Sun May 12 03:10:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 03:10:47 2013] Assessing source extent using major axis lower bound
[Sun May 12 03:10:47 2013] Source does appear to be extended
[Sun May 12 03:10:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Sun May 12 03:11:07 2013] XMMSAS src. selection expression = ellipse(25258.030680, 36907.786400, 341.301610, 227.670007, 329.255017, X, Y)
[Sun May 12 03:11:07 2013] Writing source region out to fullrun_pn_xmm0673800901_pi300-10000_pass1_cl_src10_src.reg
[Sun May 12 03:11:07 2013] Extracting stamp from image fullrun_pn_xmm0673800901_pi300-10000_cl_sm2.00.img.gz, (271, 405) - (310, 444)
[Sun May 12 03:11:07 2013] XMMSAS bgd. selection expression = annulus(25258.030680, 36907.786400, 568.836016, 1137.672033, X, Y)
[Sun May 12 03:11:07 2013] Writing fullrun_pn_xmm0673800901_pi300-10000_pass1_cl_src10.gif
[Sun May 12 03:17:23 2013] Mean detx,y = (-46.27, -9486.49) 
[Sun May 12 03:17:26 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 03:17:38 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 03:17:38 2013] Setting source spectrum file to fullrun_pn_xmm0673800901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun May 12 03:17:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673800901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun May 12 03:37:50 2013] Not generating rmf since there are only 91 counts
[Sun May 12 03:37:50 2013] rmf not generated due to insufficient counts
[Sun May 12 03:58:48 2013] Updating aperture counts using extracted products
[Sun May 12 03:58:48 2013] Total counts from fullrun_pn_xmm0673800901_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 106.00
[Sun May 12 03:58:48 2013] Total counts from fullrun_pn_xmm0673800901_pi300-10000_pass1_cl_src10_bgd.pi.gz = 151.00
[Sun May 12 03:58:48 2013] Got source and background scale factors 246400.000000, 2598078.000000
[Sun May 12 03:58:48 2013] User source parameters:
  Position = (290.9, 424.8) = 19 24 48.41 59 49 22.9
  Extent = 5.7 (4.3-7.6)" x 3.8 (3.0-4.8)", rotation angle = 329 (300-357) degrees
  Source aperture counts = 91.7 +/- 11.3
  Background aperture counts = 14.3
  Rate = 0.01 +/- 0.001

[Sun May 12 03:58:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 03:58:55 2013] Using photon index=1.80, rate=0.00969, arf fullrun_pn_xmm0673800901_pi300-10000_pass1_cl_src10.arf
[Sun May 12 03:58:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 03:58:55 2013] Updating source flux to 6.4e-14
[Sun May 12 03:59:10 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 03:59:12 2013] xmm0673800901/analysis//spectral/fullrun_pn_xmm0673800901_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete