[Sat May 11 23:58:21 2013] Detection parameters:
  Position = (441.2, 421.6) = 19 23 21.72 59 49 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.6 +/- 8.2
  Background counts = 3.2
  Rate = 0.004 +/- 0.0007

[Sat May 11 23:58:21 2013] Off-axis axis estimate = 13.67'
[Sun May 12 00:58:59 2013] Using EEF radius (= 13.26 ")to estimate initial spatial extent for simple fitting
[Sun May 12 00:58:59 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 12 00:58:59 2013] Initial guess for spatial extent in simple fitting = 13.26"
[Sun May 12 00:58:59 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.973
[Sun May 12 00:58:59 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 13.26"
[Sun May 12 01:30:09 2013] fullrun_mos2_xmm0673800901_pi300-10000_cl_pass0_src7.ximg exists
[Sun May 12 01:30:09 2013] fullrun_mos2_xmm0673800901_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun May 12 01:30:09 2013] Fit fullrun_mos2_xmm0673800901_pi300-10000_cl_pass0_src7 appears to have run properly
[Sun May 12 01:30:09 2013] fullrun_mos2_xmm0673800901_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun May 12 01:30:09 2013] fullrun_mos2_xmm0673800901_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun May 12 01:30:09 2013] Fit fullrun_mos2_xmm0673800901_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun May 12 01:30:28 2013] Spatial fit model total counts = 69.916900, observed total counts = 65.000000
[Sun May 12 01:30:28 2013] Offset between fit and detection position for source 5 = 0.423440 pixels
[Sun May 12 01:30:28 2013] 70.223200 total counts/ 35.106100 bgd. counts: snr = 5.926897
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.423440 pixels
  Position = (441.0, 421.3) = 19 23 21.83 59 49 6.0
  Extent = 11.3 (8.2-15.6)" x 4.5 (3.3-6.7)", rotation angle = 36 (22-50) degrees
  Source counts = 35.1 +/- 8.4
  Background counts = 35.1
  Rate = 0.003 +/- 0.0008
[Sun May 12 01:30:28 2013] Vigneting correction estimate = 1.000000
[Sun May 12 01:30:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 01:30:28 2013] Assessing source extent using major axis lower bound
[Sun May 12 01:30:28 2013] Source does appear to be extended
[Sun May 12 01:30:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Sun May 12 02:39:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 02:39:48 2013] Initial guess for spatial extent in simple fitting = 7.89"
[Sun May 12 02:39:48 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.934
[Sun May 12 02:39:48 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.89"
[Sun May 12 03:10:36 2013] fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_src7.ximg exists
[Sun May 12 03:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_src7.csv
[Sun May 12 03:10:36 2013] fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_src7_1.ximg exists
[Sun May 12 03:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_src7.csv
[Sun May 12 03:10:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 03:10:36 2013] fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sun May 12 03:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May 12 03:10:36 2013] fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sun May 12 03:10:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sun May 12 03:10:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673800901_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 12 03:10:54 2013] Warning, spatial fit 7 centroid is now closest to src. 11
[Sun May 12 03:10:54 2013] Vigneting correction estimate = 1.000000
[Sun May 12 03:10:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 12 03:10:54 2013] Assessing source extent using major axis lower bound
[Sun May 12 03:10:54 2013] Source does appear to be extended
[Sun May 12 03:10:54 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.23
[Sun May 12 03:47:10 2013] XMMSAS src. selection expression = ellipse(38315.829240, 36601.618200, 675.228019, 271.632008, 36.467567, X, Y)
[Sun May 12 03:47:10 2013] Writing source region out to fullrun_mos2_xmm0673800901_pi300-10000_pass1_cl_src5_src.reg
[Sun May 12 03:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0673800901_pi300-10000_cl_sm2.00.img.gz, (402, 382) - (480, 460)
[Sun May 12 03:47:10 2013] XMMSAS bgd. selection expression = annulus(38315.829240, 36601.618200, 1125.380032, 2250.760065, X, Y) && !ellipse(35637.581720, 38413.851800, 606.931217, 180.692005, 33.118953, X, Y)
[Sun May 12 03:47:10 2013] Writing fullrun_mos2_xmm0673800901_pi300-10000_pass1_cl_src5.gif
[Sun May 12 03:48:39 2013] Mean detx,y = (-12546.03, 7185.03) 
[Sun May 12 03:48:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 12 03:48:58 2013] Binned source spectrum to 10 counts/bin
[Sun May 12 03:48:58 2013] Setting source spectrum file to fullrun_mos2_xmm0673800901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 12 03:48:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673800901_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun May 12 03:57:16 2013] Not generating rmf since there are only 35 counts
[Sun May 12 03:57:16 2013] rmf not generated due to insufficient counts
[Sun May 12 03:59:02 2013] Updating aperture counts using extracted products
[Sun May 12 03:59:02 2013] Total counts from fullrun_mos2_xmm0673800901_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 37.00
[Sun May 12 03:59:02 2013] Total counts from fullrun_mos2_xmm0673800901_pi300-10000_pass1_cl_src5_bgd.pi.gz = 142.00
[Sun May 12 03:59:02 2013] Got source and background scale factors 566948.000000, 8620869.000000
[Sun May 12 03:59:02 2013] User source parameters:
  Position = (441.0, 421.3) = 19 23 21.83 59 49 6.0
  Extent = 11.3 (8.2-15.6)" x 4.5 (3.3-6.7)", rotation angle = 36 (22-50) degrees
  Source aperture counts = 27.7 +/- 7.1
  Background aperture counts = 9.3
  Rate = 0.003 +/- 0.0006

[Sun May 12 03:59:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 12 03:59:05 2013] Using photon index=1.80, rate=0.00319, arf fullrun_mos2_xmm0673800901_pi300-10000_pass1_cl_src5.arf
[Sun May 12 03:59:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 12 03:59:05 2013] Updating source flux to 1e-13
[Sun May 12 03:59:08 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun May 12 03:59:10 2013] xmm0673800901/analysis//spectral/fullrun_mos2_xmm0673800901_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete