[Mon Aug 13 14:16:55 2012] Detection parameters:
  Position = (301.8, 321.2) = 11 58 16.94 28 11 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.3 +/- 17.0
  Background counts = 13.8
  Rate = 0.01 +/- 0.001

[Mon Aug 13 14:16:55 2012] Off-axis axis estimate = 1.67'
[Mon Aug 13 15:31:37 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Mon Aug 13 15:31:37 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Mon Aug 13 15:31:37 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Mon Aug 13 15:31:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Mon Aug 13 15:51:25 2012] fullrun_mos2_xmm0673770501_pi300-10000_cl_pass0_src1.ximg exists
[Mon Aug 13 15:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770501_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 15:51:25 2012] fullrun_mos2_xmm0673770501_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Aug 13 15:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770501_pi300-10000_cl_pass0_src1.csv
[Mon Aug 13 15:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673770501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673770501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 15:51:25 2012] fullrun_mos2_xmm0673770501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Aug 13 15:51:25 2012] fullrun_mos2_xmm0673770501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Aug 13 15:51:25 2012] Fit fullrun_mos2_xmm0673770501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Aug 13 15:51:40 2012] Spatial fit model total counts = 318.641000, observed total counts = 299.000000
[Mon Aug 13 15:51:40 2012] Offset between fit and detection position for source 1 = 0.160572 pixels
[Mon Aug 13 15:51:40 2012] 321.095000 total counts/ 198.168000 bgd. counts: snr = 8.732338
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.160572 pixels
  Position = (301.8, 321.3) = 11 58 16.94 28 11 31.9
  Extent = 6.9 (5.4-8.6)", rotation angle = 0
  Source counts = 122.9 +/- 17.9
  Background counts = 198.2
  Rate = 0.01 +/- 0.001
[Mon Aug 13 15:51:40 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 15:51:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 15:51:40 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 15:51:40 2012] Source does appear to be extended
[Mon Aug 13 15:51:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 15:51:40 2012] Source is confused with source 10
[Mon Aug 13 17:00:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 13 17:00:29 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Mon Aug 13 17:00:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Mon Aug 13 17:00:29 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.86"
[Mon Aug 13 17:16:16 2012] fullrun_mos2_xmm0673770501_pi300-10000_cl_pass1_src1.ximg exists
[Mon Aug 13 17:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770501_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 17:16:16 2012] fullrun_mos2_xmm0673770501_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Aug 13 17:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770501_pi300-10000_cl_pass1_src1.csv
[Mon Aug 13 17:16:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673770501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673770501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 13 17:16:17 2012] fullrun_mos2_xmm0673770501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Aug 13 17:16:17 2012] fullrun_mos2_xmm0673770501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Aug 13 17:16:17 2012] Fit fullrun_mos2_xmm0673770501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Aug 13 17:16:31 2012] Spatial fit model total counts = 317.113000, observed total counts = 299.000000
[Mon Aug 13 17:16:31 2012] Offset between fit and detection position for source 1 = 0.007348 pixels
[Mon Aug 13 17:16:31 2012] 319.492000 total counts/ 196.655000 bgd. counts: snr = 8.759447
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.007348 pixels
  Position = (301.8, 321.3) = 11 58 16.94 28 11 31.9
  Extent = 6.9 (5.3-8.6)", rotation angle = 0
  Source counts = 122.8 +/- 17.9
  Background counts = 196.7
  Rate = 0.01 +/- 0.001
[Mon Aug 13 17:16:31 2012] Vigneting correction estimate = 1.000000
[Mon Aug 13 17:16:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 13 17:16:31 2012] Assessing source extent using major axis lower bound
[Mon Aug 13 17:16:31 2012] Source does appear to be extended
[Mon Aug 13 17:16:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 13 18:02:45 2012] XMMSAS src. selection expression = ellipse(26205.247400, 27907.685600, 414.517222, 414.517222, 0.000000, X, Y)
[Mon Aug 13 18:02:45 2012] Writing source region out to fullrun_mos2_xmm0673770501_pi300-10000_pass1_cl_src1_src.reg
[Mon Aug 13 18:02:45 2012] Extracting stamp from image fullrun_mos2_xmm0673770501_pi300-10000_cl_sm2.00.img.gz, (278, 298) - (326, 345)
[Mon Aug 13 18:02:45 2012] XMMSAS bgd. selection expression = annulus(26205.247400, 27907.685600, 690.862037, 1381.724074, X, Y) && !ellipse(26159.849091, 30071.835632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26533.138245, 28564.450714, 1740.000000, 1740.000000, 0.000000, X, Y)
[Mon Aug 13 18:02:45 2012] Writing fullrun_mos2_xmm0673770501_pi300-10000_pass1_cl_src1.gif
[Mon Aug 13 18:02:48 2012] Mean detx,y = (69.97, 44.67) 
[Mon Aug 13 18:02:50 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 13 18:03:03 2012] Binned source spectrum to 10 counts/bin
[Mon Aug 13 18:03:03 2012] Setting source spectrum file to fullrun_mos2_xmm0673770501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 18:03:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0673770501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Aug 13 18:15:00 2012] Updating aperture counts using extracted products
[Mon Aug 13 18:15:00 2012] Error reading totcts from fullrun_mos2_xmm0673770501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Aug 13 18:15:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 18:15:00 2012] Using photon index=1.80, rate=0.00993, arf fullrun_mos2_xmm0673770501_pi300-10000_pass1_cl_src1.arf
[Mon Aug 13 18:15:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 18:15:00 2012] Updating source flux to 1.2e-13
[Mon Aug 13 18:15:14 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon Aug 13 18:15:27 2012] Reading fit data from xmm0673770501/analysis//spectral/fullrun_mos2_xmm0673770501_pi300-10000_pass1_cl_src1_pl.csv
[Mon Aug 13 18:15:27 2012] Spectral fit parameter nH value = 8.91498e+21
[Mon Aug 13 18:15:27 2012] Spectral fit parameter PhoIndex value = 8.49217
[Mon Aug 13 18:15:27 2012] Failed to get F(0.3-8.0) from xmm0673770501/analysis//spectral/fullrun_mos2_xmm0673770501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Aug 13 18:15:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon Aug 13 18:15:27 2012] Using Nh = 8.9e+21, photon index=8.49, rate=0.00993, arf fullrun_mos2_xmm0673770501_pi300-10000_pass1_cl_src1.arf
[Mon Aug 13 18:15:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Aug 13 18:15:27 2012] Updating source flux to 7.1e-14