[Wed Jul 25 17:36:33 2012] Detection parameters:
  Position = (278.6, 311.2) = 15 38 39.90 59 21 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.2 +/- 20.9
  Background counts = 9.1
  Rate = 0.02 +/- 0.002

[Wed Jul 25 17:36:33 2012] Off-axis axis estimate = 1.71'
[Wed Jul 25 18:42:07 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Jul 25 18:42:07 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Jul 25 18:42:07 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Wed Jul 25 18:42:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Jul 25 19:12:56 2012] fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jul 25 19:12:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 19:12:56 2012] fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jul 25 19:12:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_src1.csv
[Wed Jul 25 19:12:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 19:12:57 2012] fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jul 25 19:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 19:12:57 2012] fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jul 25 19:12:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jul 25 19:12:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673770401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 19:13:09 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Wed Jul 25 19:13:09 2012] Spatial fit model total counts = 332.616000, observed total counts = 330.000000
[Wed Jul 25 19:13:09 2012] Offset between fit and detection position for source 2 = 2.994424 pixels
[Wed Jul 25 19:13:09 2012] Warning, changing simple spatial fit ID from 1 to 16
[Wed Jul 25 19:13:09 2012] 314.739300 total counts/ 235.910000 bgd. counts: snr = 5.132329
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.994424 pixels
  Position = (281.6, 311.6) = 15 38 38.21 59 21 19.0
  Extent = 9.8 (6.4-13.9)", rotation angle = 0
  Source counts = 78.8 +/- 17.7
  Background counts = 235.9
  Rate = 0.006 +/- 0.001
[Wed Jul 25 19:13:09 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 19:13:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 19:13:09 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 19:13:09 2012] Source does appear to be extended
[Wed Jul 25 19:13:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 20:02:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 20:02:33 2012] Initial guess for spatial extent in simple fitting = 9.83"
[Wed Jul 25 20:02:33 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.821
[Wed Jul 25 20:02:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.83"
[Wed Jul 25 20:31:25 2012] fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jul 25 20:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 20:31:25 2012] fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jul 25 20:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_src1.csv
[Wed Jul 25 20:31:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 20:31:25 2012] fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jul 25 20:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul 25 20:31:25 2012] fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jul 25 20:31:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jul 25 20:31:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673770401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 20:31:35 2012] Spatial fit model total counts = 641.785000, observed total counts = 578.000000
[Wed Jul 25 20:31:35 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 20:31:35 2012] Spatial fit model total counts = 265.133000, observed total counts = 263.000000
[Wed Jul 25 20:31:35 2012] Offset between fit and detection position for source 2 = 3.991502 pixels
[Wed Jul 25 20:31:35 2012] Warning, changing simple spatial fit ID from 1 to 20
[Wed Jul 25 20:31:35 2012] 262.478100 total counts/ 209.874000 bgd. counts: snr = 3.631117
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 3.991502 pixels
  Position = (279.0, 308.6) = 15 38 39.70 59 21 6.0
  Extent = 9.3 (6.4-14.2)", rotation angle = 0
  Source counts = 52.6 +/- 16.2
  Background counts = 209.9
  Rate = 0.004 +/- 0.001
[Wed Jul 25 20:31:35 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 20:31:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 20:31:35 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 20:31:35 2012] Source does appear to be extended
[Wed Jul 25 20:31:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 20:31:35 2012] Source is confused with source 13
[Wed Jul 25 21:05:18 2012] XMMSAS src. selection expression = ellipse(24223.777454, 26795.404000, 558.688216, 558.688216, 0.000000, X, Y)
[Wed Jul 25 21:05:18 2012] Writing source region out to fullrun_mos2_xmm0673770401_pi300-10000_pass1_cl_src2_src.reg
[Wed Jul 25 21:05:18 2012] Extracting stamp from image fullrun_mos2_xmm0673770401_pi300-10000_cl_sm2.00.img.gz, (247, 276) - (311, 341)
[Wed Jul 25 21:05:18 2012] XMMSAS bgd. selection expression = annulus(24223.777454, 26795.404000, 931.147027, 1862.294054, X, Y) && !ellipse(25562.264000, 26279.736000, 1109.528032, 1109.528032, 0.000000, X, Y) && !ellipse(24057.063232, 28027.967529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.326569, 26181.763702, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 21:05:18 2012] Writing fullrun_mos2_xmm0673770401_pi300-10000_pass1_cl_src2.gif
[Wed Jul 25 21:05:20 2012] Mean detx,y = (190.59, 109.28) 
[Wed Jul 25 21:05:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 21:05:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 21:05:27 2012] Setting source spectrum file to fullrun_mos2_xmm0673770401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 25 21:05:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0673770401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Jul 25 21:08:54 2012] Not generating rmf since there are only 52 counts
[Wed Jul 25 21:08:54 2012] rmf not generated due to insufficient counts
[Wed Jul 25 21:10:55 2012] Updating aperture counts using extracted products
[Wed Jul 25 21:10:55 2012] Error reading totcts from fullrun_mos2_xmm0673770401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Jul 25 21:10:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 21:10:56 2012] Using photon index=1.80, rate=0.00412, arf fullrun_mos2_xmm0673770401_pi300-10000_pass1_cl_src2.arf
[Wed Jul 25 21:10:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 21:10:56 2012] Updating source flux to 4.7e-14
[Wed Jul 25 21:11:19 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Wed Jul 25 21:11:19 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Wed Jul 25 21:11:19 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jul 25 21:11:20 2012] xmm0673770401/analysis//spectral/fullrun_mos2_xmm0673770401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete