[Sat Aug 10 05:00:44 2013] Detection parameters:
  Position = (333.8, 333.6) = 1 48 57.73 13 6 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.2 +/- 11.7
  Background counts = 27.2
  Rate = 0.002 +/- 0.0004

[Sat Aug 10 05:00:45 2013] Off-axis axis estimate = 3.61'
[Sat Aug 10 06:22:02 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sat Aug 10 06:22:02 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Sat Aug 10 06:22:02 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.091
[Sat Aug 10 06:22:02 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 8.24"
[Sat Aug 10 06:49:15 2013] fullrun_mos1_xmm0673770301_pi300-10000_cl_pass0_src17.ximg exists
[Sat Aug 10 06:49:15 2013] fullrun_mos1_xmm0673770301_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Aug 10 06:49:15 2013] Fit fullrun_mos1_xmm0673770301_pi300-10000_cl_pass0_src17 appears to have run properly
[Sat Aug 10 06:49:15 2013] fullrun_mos1_xmm0673770301_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Aug 10 06:49:15 2013] fullrun_mos1_xmm0673770301_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Aug 10 06:49:15 2013] Fit fullrun_mos1_xmm0673770301_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Aug 10 07:28:15 2013] Warning, spatial fit 17 centroid is now closest to src. 1
[Sat Aug 10 07:28:15 2013] Vigneting correction estimate = 1.000000
[Sat Aug 10 07:28:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 10 07:28:15 2013] Assessing source extent using major
[Sat Aug 10 07:28:15 2013] Source does appear to be extended
[Sat Aug 10 07:28:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 10 08:40:30 2013] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Sat Aug 10 08:40:30 2013] Initial guess for spatial extent in simple fitting = 8.24"
[Sat Aug 10 08:40:30 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.091
[Sat Aug 10 08:40:30 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 8.24"
[Sat Aug 10 09:04:37 2013] fullrun_mos1_xmm0673770301_pi300-10000_cl_pass1_src17.ximg exists
[Sat Aug 10 09:04:37 2013] fullrun_mos1_xmm0673770301_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Aug 10 09:04:37 2013] Fit fullrun_mos1_xmm0673770301_pi300-10000_cl_pass1_src17 appears to have run properly
[Sat Aug 10 09:04:37 2013] fullrun_mos1_xmm0673770301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Aug 10 09:04:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673770301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Aug 10 09:04:37 2013] fullrun_mos1_xmm0673770301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Aug 10 09:04:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673770301_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Aug 10 09:04:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673770301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673770301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 10 09:38:02 2013] Spatial fit model total counts = 2.260860, observed total counts = 1669.000000
[Sat Aug 10 09:38:02 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 10 09:38:02 2013] Spatial fit model total counts = 742.262000, observed total counts = 708.000000
[Sat Aug 10 09:38:02 2013] Offset between fit and detection position for source 18 = 8.218203 pixels
[Sat Aug 10 09:38:02 2013] 846.138000 total counts/ 612.271000 bgd. counts: snr = 9.451421
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 8.218203 pixels
  Position = (327.6, 328.1) = 1 48 59.57 13 6 28.6
  Extent = 16.5 (16.5-32.9)" x 16.5 (15.3-32.9)", rotation angle = 264 (72-0) degrees
  Source counts = 233.9 +/- 29.1
  Background counts = 612.3
  Rate = 0.006 +/- 0.0007
[Sat Aug 10 09:38:02 2013] Vigneting correction estimate = 1.000000
[Sat Aug 10 09:38:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 10 09:38:02 2013] Assessing source extent using major axis lower bound
[Sat Aug 10 09:38:02 2013] Source does appear to be extended
[Sat Aug 10 09:38:02 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.50
[Sat Aug 10 10:33:46 2013] XMMSAS src. selection expression = ellipse(28455.094000, 28498.596000, 988.224028, 988.224028, 263.858000, X, Y)
[Sat Aug 10 10:33:46 2013] Writing source region out to fullrun_mos1_xmm0673770301_pi300-10000_pass1_cl_src18_src.reg
[Sat Aug 10 10:33:46 2013] Extracting stamp from image fullrun_mos1_xmm0673770301_pi300-10000_cl_sm2.00.img.gz, (271, 271) - (384, 385)
[Sat Aug 10 10:33:46 2013] XMMSAS bgd. selection expression = annulus(28455.094000, 28498.596000, 1647.040047, 3294.080095, X, Y) && !ellipse(29668.316000, 29629.966000, 736.087221, 736.087221, 0.000000, X, Y) && !ellipse(30633.832800, 27036.719800, 387.696011, 292.507208, 72.411100, X, Y) && !ellipse(24832.899963, 24986.047363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25821.484000, 25192.556000, 1105.968032, 1105.968032, 0.000000, X, Y)
[Sat Aug 10 10:33:46 2013] Writing fullrun_mos1_xmm0673770301_pi300-10000_pass1_cl_src18.gif
[Sat Aug 10 10:37:20 2013] Mean detx,y = (-4819.43, -2958.83) 
[Sat Aug 10 10:37:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 10 10:37:32 2013] Binned source spectrum to 10 counts/bin
[Sat Aug 10 10:37:33 2013] Setting source spectrum file to fullrun_mos1_xmm0673770301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Aug 10 10:37:33 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673770301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Aug 10 11:23:43 2013] Updating aperture counts using extracted products
[Sat Aug 10 11:23:43 2013] Total counts from fullrun_mos1_xmm0673770301_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 511.00
[Sat Aug 10 11:23:43 2013] Total counts from fullrun_mos1_xmm0673770301_pi300-10000_pass1_cl_src18_bgd.pi.gz = 2494.00
[Sat Aug 10 11:23:43 2013] Got source and background scale factors 3032984.000000, 18658075.000000
[Sat Aug 10 11:23:43 2013] User source parameters:
  Position = (327.6, 328.1) = 1 48 59.57 13 6 28.6
  Extent = 16.5 (16.5-32.9)" x 16.5 (15.3-32.9)", rotation angle = 264 (72-0) degrees
  Source aperture counts = 105.6 +/- 23.6
  Background aperture counts = 405.4
  Rate = 0.003 +/- 0.0006

[Sat Aug 10 11:23:44 2013] Calculating source flux in energy range 0.30-8.00
[Sat Aug 10 11:23:44 2013] Using photon index=1.80, rate=0.00591, arf fullrun_mos1_xmm0673770301_pi300-10000_pass1_cl_src18.arf
[Sat Aug 10 11:23:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 10 11:23:44 2013] Updating source flux to 7.3e-14
[Sat Aug 10 11:23:50 2013] Flag p found in src. 18 procflags, skipping spectral fitting
[Sat Aug 10 11:23:53 2013] xmm0673770301/analysis//spectral/fullrun_mos1_xmm0673770301_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete