[Tue Jun 18 14:24:17 2013] Detection parameters:
  Position = (381.9, 294.2) = 1 46 37.66 -9 31 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.8 +/- 19.4
  Background counts = 29.6
  Rate = 0.01 +/- 0.001

[Tue Jun 18 14:24:18 2013] Off-axis axis estimate = 6.06'
[Tue Jun 18 14:26:21 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 14:26:21 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Tue Jun 18 14:26:21 2013] source mask rpix=2.2, npix_max = 28, mask sum = 35, frac = 1.223
[Tue Jun 18 14:26:21 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 9.46"
[Tue Jun 18 15:58:41 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src37.ximg exists
[Tue Jun 18 15:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src37.csv
[Tue Jun 18 15:58:41 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src37_1.ximg exists
[Tue Jun 18 15:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src37.csv
[Tue Jun 18 15:58:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 15:58:41 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Tue Jun 18 15:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue Jun 18 15:58:41 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Tue Jun 18 15:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Tue Jun 18 15:58:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:11 2013] Source 37 is offset by -6.671907 and -7.360449 pixels which is larger than
2 X fitted extent = 1.087926 x 1.087926, not incorporating fit results
[Tue Jun 18 17:23:11 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 17:23:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 17:23:11 2013] Assessing source extent using major
[Tue Jun 18 17:23:11 2013] Source does appear to be extended
[Tue Jun 18 17:23:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 17:23:28 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 17:23:28 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Tue Jun 18 17:23:28 2013] source mask rpix=2.2, npix_max = 28, mask sum = 35, frac = 1.223
[Tue Jun 18 17:23:28 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 9.46"
[Tue Jun 18 18:47:13 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src36.ximg exists
[Tue Jun 18 18:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src36.csv
[Tue Jun 18 18:47:13 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src36_1.ximg exists
[Tue Jun 18 18:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src36.csv
[Tue Jun 18 18:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 18:47:13 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Tue Jun 18 18:47:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Tue Jun 18 18:47:14 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Tue Jun 18 18:47:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Tue Jun 18 18:47:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 20:08:34 2013] Source 37 is offset by -6.672942 and -7.354816 pixels which is larger than
2 X fitted extent = 1.094552 x 1.094552, not incorporating fit results
[Tue Jun 18 20:08:34 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 20:08:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 20:08:34 2013] Assessing source extent using major
[Tue Jun 18 20:08:34 2013] Source does appear to be extended
[Tue Jun 18 20:08:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 20:08:49 2013] XMMSAS src. selection expression = ellipse(33177.118073, 25543.576965, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 20:08:49 2013] Writing source region out to fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src37_src.reg
[Tue Jun 18 20:08:49 2013] Extracting stamp from image fullrun_pn_xmm0673750101_pi300-10000_cl_sm2.00.img.gz, (344, 257) - (419, 332)
[Tue Jun 18 20:08:49 2013] XMMSAS bgd. selection expression = annulus(33177.118073, 25543.576965, 1087.500000, 2175.000000, X, Y) && !ellipse(34113.086400, 26526.498800, 462.576813, 462.576813, 0.000000, X, Y) && !ellipse(31923.625641, 25256.321381, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 20:08:49 2013] Writing fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src37.gif
[Tue Jun 18 20:29:12 2013] Mean detx,y = (5525.82, -1688.46) 
[Tue Jun 18 20:29:15 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 20:29:35 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 20:29:35 2013] Setting source spectrum file to fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Tue Jun 18 20:29:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Tue Jun 18 20:46:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun 18 20:46:18 2013] rmf not generated due to insufficient counts
[Tue Jun 18 21:57:47 2013] Updating aperture counts using extracted products
[Tue Jun 18 21:57:47 2013] Total counts from fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 387.00
[Tue Jun 18 21:57:47 2013] Total counts from fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src37_bgd.pi.gz = 1265.00
[Tue Jun 18 21:57:47 2013] Got source and background scale factors 1183228.000000, 8336012.000000
[Tue Jun 18 21:57:47 2013] User source parameters:
  Position = (381.9, 294.2) = 1 46 37.66 -9 31 2.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 207.4 +/- 20.7
  Background aperture counts = 179.6
  Rate = 0.01 +/- 0.001

[Tue Jun 18 21:57:47 2013] Updating counts from extracted products
[Tue Jun 18 21:57:47 2013] Set source signif. to 207.44/13.40 = 15.48
[Tue Jun 18 21:57:50 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 21:57:50 2013] Using photon index=1.80, rate=0.0103, arf fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src37.arf
[Tue Jun 18 21:57:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 21:57:50 2013] Updating source flux to 3.5e-14
[Tue Jun 18 21:58:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 21:58:04 2013] xmm0673750101/analysis//spectral/fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete