[Tue Jun 18 14:24:17 2013] Detection parameters:
  Position = (333.2, 328.1) = 1 46 51.97 -9 28 39.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.2 +/- 12.9
  Background counts = 32.2
  Rate = 0.006 +/- 0.001

[Tue Jun 18 14:24:18 2013] Off-axis axis estimate = 3.31'
[Tue Jun 18 14:26:21 2013] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 14:26:21 2013] Initial guess for spatial extent in simple fitting = 8.08"
[Tue Jun 18 14:26:21 2013] source mask rpix=1.9, npix_max = 22, mask sum = 12, frac = 0.539
[Tue Jun 18 14:26:21 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 8.08"
[Tue Jun 18 15:58:41 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src26.ximg exists
[Tue Jun 18 15:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src26.csv
[Tue Jun 18 15:58:41 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src26_1.ximg exists
[Tue Jun 18 15:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src26.csv
[Tue Jun 18 15:58:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 15:58:41 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Tue Jun 18 15:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue Jun 18 15:58:41 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Tue Jun 18 15:58:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Tue Jun 18 15:58:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:11 2013] Spatial fit model total counts = 519.881000, observed total counts = 439.000000
[Tue Jun 18 17:23:11 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 17:23:11 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 17:23:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 17:23:11 2013] Assessing source extent using major
[Tue Jun 18 17:23:11 2013] Source does appear to be extended
[Tue Jun 18 17:23:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 17:23:28 2013] Using EEF radius (= 8.08 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 17:23:28 2013] Initial guess for spatial extent in simple fitting = 8.08"
[Tue Jun 18 17:23:28 2013] source mask rpix=1.9, npix_max = 22, mask sum = 12, frac = 0.539
[Tue Jun 18 17:23:28 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 8.08"
[Tue Jun 18 18:47:13 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src26.ximg exists
[Tue Jun 18 18:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src26.csv
[Tue Jun 18 18:47:13 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Jun 18 18:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src26.csv
[Tue Jun 18 18:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 18:47:13 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Jun 18 18:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jun 18 18:47:13 2013] fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Jun 18 18:47:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Tue Jun 18 18:47:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 20:08:34 2013] Spatial fit model total counts = 517.153000, observed total counts = 439.000000
[Tue Jun 18 20:08:34 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 20:08:34 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 20:08:34 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 20:08:34 2013] Assessing source extent using major
[Tue Jun 18 20:08:34 2013] Source does appear to be extended
[Tue Jun 18 20:08:34 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 20:08:49 2013] XMMSAS src. selection expression = ellipse(28941.297607, 28491.936554, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 20:08:49 2013] Writing source region out to fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src26_src.reg
[Tue Jun 18 20:08:49 2013] Extracting stamp from image fullrun_pn_xmm0673750101_pi300-10000_cl_sm2.00.img.gz, (296, 291) - (371, 366)
[Tue Jun 18 20:08:49 2013] XMMSAS bgd. selection expression = annulus(28941.297607, 28491.936554, 1087.500000, 2175.000000, X, Y) && !ellipse(27723.209991, 26920.807037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27789.920258, 28976.333374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30289.378113, 28959.128784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27000.718109, 28752.365723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27669.647400, 28467.318000, 656.442419, 158.480805, 342.425100, X, Y) && !ellipse(26369.885803, 28139.083160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26505.600281, 27701.093597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26202.549927, 27356.606201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26102.909332, 26196.111481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28138.899963, 25827.537659, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 20:08:49 2013] Writing fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src26.gif
[Tue Jun 18 20:24:28 2013] Mean detx,y = (294.03, -2185.90) 
[Tue Jun 18 20:24:31 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 20:24:50 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 20:24:51 2013] Setting source spectrum file to fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Tue Jun 18 20:24:51 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Tue Jun 18 20:44:42 2013] Not generating rmf since there are only 81 counts
[Tue Jun 18 20:44:42 2013] rmf not generated due to insufficient counts
[Tue Jun 18 21:57:45 2013] Updating aperture counts using extracted products
[Tue Jun 18 21:57:45 2013] Total counts from fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 282.00
[Tue Jun 18 21:57:45 2013] Total counts from fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 894.00
[Tue Jun 18 21:57:45 2013] Got source and background scale factors 1042452.000000, 4924801.000000
[Tue Jun 18 21:57:45 2013] User source parameters:
  Position = (333.2, 328.1) = 1 46 51.97 -9 28 39.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 92.8 +/- 17.8
  Background aperture counts = 189.2
  Rate = 0.005 +/- 0.0009

[Tue Jun 18 21:57:45 2013] Updating counts from extracted products
[Tue Jun 18 21:57:45 2013] Set source signif. to 92.76/13.76 = 6.74
[Tue Jun 18 21:57:50 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 21:57:50 2013] Using photon index=1.80, rate=0.0046, arf fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src26.arf
[Tue Jun 18 21:57:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 21:57:50 2013] Updating source flux to 1.6e-14
[Tue Jun 18 21:58:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 21:58:04 2013] xmm0673750101/analysis//spectral/fullrun_pn_xmm0673750101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete