[Tue Jun 18 14:25:00 2013] Detection parameters:
  Position = (318.9, 309.9) = 1 46 56.18 -9 29 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.3 +/- 22.4
  Background counts = 9.8
  Rate = 0.01 +/- 0.001

[Tue Jun 18 14:25:00 2013] Off-axis axis estimate = 1.70'
[Tue Jun 18 16:28:01 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 16:28:01 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Tue Jun 18 16:28:01 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Tue Jun 18 16:28:01 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.28"
[Tue Jun 18 17:22:59 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 18 17:22:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 18 17:22:59 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 18 17:22:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 18 17:22:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 18 17:23:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:18 2013] Spatial fit model total counts = 987.241000, observed total counts = 829.000000
[Tue Jun 18 17:23:18 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 17:23:18 2013] Spatial fit model total counts = 474.732000, observed total counts = 436.000000
[Tue Jun 18 17:23:18 2013] Offset between fit and detection position for source 3 = 2.152073 pixels
[Tue Jun 18 17:23:18 2013] Warning, changing simple spatial fit ID from 3 to 12
[Tue Jun 18 17:23:18 2013] 460.456000 total counts/ 335.248000 bgd. counts: snr = 6.838313
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.152073 pixels
  Position = (318.4, 312.0) = 1 46 56.33 -9 29 45.0
  Extent = 15.3 (15.1-30.6)" x 9.3 (4.4-13.9)", rotation angle = 22 (348-51) degrees
  Source counts = 125.2 +/- 21.5
  Background counts = 335.2
  Rate = 0.006 +/- 0.0009
[Tue Jun 18 17:23:18 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 17:23:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 17:23:18 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 17:23:18 2013] Source does appear to be extended
[Tue Jun 18 17:23:18 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08
[Tue Jun 18 17:23:18 2013] Source is confused with source 15
[Tue Jun 18 17:23:18 2013] Source is confused with source 14
[Tue Jun 18 19:13:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 18 19:13:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 18 19:13:55 2013] Initial guess for spatial extent in simple fitting = 12.28"
[Tue Jun 18 19:13:55 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.815
[Tue Jun 18 19:13:55 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 12.28"
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jun 18 20:08:25 2013] Fit fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src3 appears to have run properly
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jun 18 20:08:25 2013] Fit fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jun 18 20:08:39 2013] Spatial fit model total counts = 935.767000, observed total counts = 899.000000
[Tue Jun 18 20:08:39 2013] Offset between fit and detection position for source 3 = 2.065275 pixels
[Tue Jun 18 20:08:39 2013] 916.804000 total counts/ 408.567000 bgd. counts: snr = 25.144016
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.065275 pixels
  Position = (318.2, 309.9) = 1 46 56.40 -9 29 54.0
  Extent = 18.0 (14.3-23.5)" x 14.2 (10.9-18.0)", rotation angle = 59 (90-90) degrees
  Source counts = 508.2 +/- 30.3
  Background counts = 408.6
  Rate = 0.02 +/- 0.001
[Tue Jun 18 20:08:39 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 20:08:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 20:08:39 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 20:08:39 2013] Source does appear to be extended
[Tue Jun 18 20:08:39 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.79
[Tue Jun 18 21:29:42 2013] XMMSAS src. selection expression = ellipse(27631.030200, 26914.382000, 1082.058031, 853.530025, 59.472000, X, Y)
[Tue Jun 18 21:29:42 2013] Writing source region out to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 18 21:29:42 2013] Extracting stamp from image fullrun_mos2_xmm0673750101_pi300-10000_cl_sm2.00.img.gz, (256, 248) - (380, 372)
[Tue Jun 18 21:29:42 2013] XMMSAS bgd. selection expression = annulus(27631.030200, 26914.382000, 1803.430052, 3606.860104, X, Y) && !ellipse(28284.623901, 27621.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24687.051800, 29063.505800, 657.059219, 657.059219, 0.000000, X, Y) && !ellipse(28578.312000, 28144.520000, 1223.192035, 1223.192035, 0.000000, X, Y) && !ellipse(27264.930000, 27418.618400, 1155.392033, 1155.392033, 0.000000, X, Y) && !ellipse(28802.898895, 26830.976776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28650.962189, 26192.938721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27652.065826, 28556.201538, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 21:29:42 2013] Writing fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src3.gif
[Tue Jun 18 21:30:20 2013] Mean detx,y = (198.49, 98.65) 
[Tue Jun 18 21:30:21 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 21:30:32 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 21:30:32 2013] Setting source spectrum file to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 18 21:30:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 18 21:57:53 2013] Updating aperture counts using extracted products
[Tue Jun 18 21:57:53 2013] Total counts from fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 996.00
[Tue Jun 18 21:57:53 2013] Total counts from fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1418.00
[Tue Jun 18 21:57:53 2013] Got source and background scale factors 2681992.000000, 26234204.000000
[Tue Jun 18 21:57:53 2013] User source parameters:
  Position = (318.2, 309.9) = 1 46 56.40 -9 29 54.0
  Extent = 18.0 (14.3-23.5)" x 14.2 (10.9-18.0)", rotation angle = 59 (90-90) degrees
  Source aperture counts = 851.0 +/- 32.6
  Background aperture counts = 145.0
  Rate = 0.04 +/- 0.001

[Tue Jun 18 21:57:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 21:57:55 2013] Using photon index=1.80, rate=0.0225, arf fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src3.arf
[Tue Jun 18 21:57:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 21:57:55 2013] Updating source flux to 2.3e-13
[Tue Jun 18 21:58:00 2013] Flag p found in src. 3 procflags, skipping spectral fitting
[Tue Jun 18 21:58:00 2013] Flag c found in src. 3 procflags, skipping spectral fitting
[Tue Jun 18 21:58:03 2013] xmm0673750101/analysis//spectral/fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete