[Tue Jun 18 14:25:00 2013] Detection parameters:
  Position = (329.9, 301.6) = 1 46 52.95 -9 30 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.3 +/- 8.5
  Background counts = 9.4
  Rate = 0.002 +/- 0.0004

[Tue Jun 18 14:25:00 2013] Off-axis axis estimate = 2.29'
[Tue Jun 18 16:28:01 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 16:28:01 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Tue Jun 18 16:28:01 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.995
[Tue Jun 18 16:28:01 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 7.57"
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src23.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src23.csv
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src23_1.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src23.csv
[Tue Jun 18 17:23:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Tue Jun 18 17:23:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:18 2013] Source 17 is offset by 5.857910 and -4.743187 pixels which is larger than
2 X fitted extent = 3.533099 x 3.533099, not incorporating fit results
[Tue Jun 18 17:23:18 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 17:23:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 17:23:18 2013] Assessing source extent using major
[Tue Jun 18 17:23:18 2013] Source does appear to be extended
[Tue Jun 18 17:23:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 19:13:55 2013] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 19:13:55 2013] Initial guess for spatial extent in simple fitting = 7.57"
[Tue Jun 18 19:13:55 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.995
[Tue Jun 18 19:13:55 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 7.57"
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src21.ximg exists
[Tue Jun 18 20:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src21.csv
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src21_1.ximg exists
[Tue Jun 18 20:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src21.csv
[Tue Jun 18 20:08:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 20:08:26 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Tue Jun 18 20:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Jun 18 20:08:26 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Tue Jun 18 20:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Tue Jun 18 20:08:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 20:08:39 2013] Source 17 is offset by 5.857772 and -4.582015 pixels which is larger than
2 X fitted extent = 3.342989 x 3.342989, not incorporating fit results
[Tue Jun 18 20:08:39 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 20:08:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 20:08:39 2013] Assessing source extent using major
[Tue Jun 18 20:08:39 2013] Source does appear to be extended
[Tue Jun 18 20:08:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 21:29:42 2013] XMMSAS src. selection expression = ellipse(28650.962189, 26192.938721, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 21:29:42 2013] Writing source region out to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src17_src.reg
[Tue Jun 18 21:29:42 2013] Extracting stamp from image fullrun_mos2_xmm0673750101_pi300-10000_cl_sm2.00.img.gz, (292, 264) - (367, 339)
[Tue Jun 18 21:29:42 2013] XMMSAS bgd. selection expression = annulus(28650.962189, 26192.938721, 1087.500000, 2175.000000, X, Y) && !ellipse(27631.030200, 26914.382000, 1442.744042, 1138.040033, 59.472000, X, Y) && !ellipse(28284.623901, 27621.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28578.312000, 28144.520000, 1223.192035, 1223.192035, 0.000000, X, Y) && !ellipse(27264.930000, 27418.618400, 1155.392033, 1155.392033, 0.000000, X, Y) && !ellipse(28802.898895, 26830.976776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27652.065826, 28556.201538, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 21:29:42 2013] Writing fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src17.gif
[Tue Jun 18 21:33:58 2013] Mean detx,y = (-1046.69, -51.95) 
[Tue Jun 18 21:33:59 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 21:34:07 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 21:34:07 2013] Setting source spectrum file to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jun 18 21:34:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Jun 18 21:56:47 2013] Not generating rmf since there are only 33 counts
[Tue Jun 18 21:56:47 2013] rmf not generated due to insufficient counts
[Tue Jun 18 21:57:55 2013] Updating aperture counts using extracted products
[Tue Jun 18 21:57:55 2013] Total counts from fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 128.00
[Tue Jun 18 21:57:55 2013] Total counts from fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 293.00
[Tue Jun 18 21:57:55 2013] Got source and background scale factors 1209528.000000, 6381632.000000
[Tue Jun 18 21:57:55 2013] User source parameters:
  Position = (329.9, 301.6) = 1 46 52.95 -9 30 31.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 72.5 +/- 12.3
  Background aperture counts = 55.5
  Rate = 0.003 +/- 0.0005

[Tue Jun 18 21:57:55 2013] Updating counts from extracted products
[Tue Jun 18 21:57:55 2013] Set source signif. to 72.47/7.45 = 9.72
[Tue Jun 18 21:57:56 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 21:57:56 2013] Using photon index=1.80, rate=0.0032, arf fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src17.arf
[Tue Jun 18 21:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 21:57:56 2013] Updating source flux to 3.1e-14
[Tue Jun 18 21:58:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 21:58:03 2013] xmm0673750101/analysis//spectral/fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete