[Tue Jun 18 14:25:00 2013] Detection parameters:
  Position = (331.6, 309.0) = 1 46 52.44 -9 29 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.1 +/- 8.4
  Background counts = 9.6
  Rate = 0.002 +/- 0.0004

[Tue Jun 18 14:25:00 2013] Off-axis axis estimate = 2.52'
[Tue Jun 18 16:28:01 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 16:28:01 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Tue Jun 18 16:28:01 2013] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.875
[Tue Jun 18 16:28:01 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 7.69"
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src21.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src21.csv
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src21_1.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src21.csv
[Tue Jun 18 17:23:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Tue Jun 18 17:23:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:18 2013] Source 16 is offset by 7.697160 and 0.066653 pixels which is larger than
2 X fitted extent = 5.450161 x 5.450161, not incorporating fit results
[Tue Jun 18 17:23:18 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 17:23:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 17:23:18 2013] Assessing source extent using major
[Tue Jun 18 17:23:18 2013] Source does appear to be extended
[Tue Jun 18 17:23:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 19:13:55 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 19:13:55 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Tue Jun 18 19:13:55 2013] source mask rpix=1.8, npix_max = 20, mask sum = 18, frac = 0.875
[Tue Jun 18 19:13:55 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 7.69"
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src19.ximg exists
[Tue Jun 18 20:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src19.csv
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Jun 18 20:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src19.csv
[Tue Jun 18 20:08:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 20:08:26 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Jun 18 20:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Tue Jun 18 20:08:26 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Jun 18 20:08:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Tue Jun 18 20:08:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 20:08:39 2013] Source 16 is offset by -4.632426 and -0.582984 pixels which is larger than
2 X fitted extent = 0.884584 x 0.884584, not incorporating fit results
[Tue Jun 18 20:08:39 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 20:08:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 20:08:39 2013] Assessing source extent using major
[Tue Jun 18 20:08:39 2013] Source does appear to be extended
[Tue Jun 18 20:08:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 21:29:42 2013] XMMSAS src. selection expression = ellipse(28802.898895, 26830.976776, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun 18 21:29:42 2013] Writing source region out to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src16_src.reg
[Tue Jun 18 21:29:42 2013] Extracting stamp from image fullrun_mos2_xmm0673750101_pi300-10000_cl_sm2.00.img.gz, (294, 271) - (369, 346)
[Tue Jun 18 21:29:42 2013] XMMSAS bgd. selection expression = annulus(28802.898895, 26830.976776, 1087.500000, 2175.000000, X, Y) && !ellipse(27631.030200, 26914.382000, 1442.744042, 1138.040033, 59.472000, X, Y) && !ellipse(28284.623901, 27621.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28578.312000, 28144.520000, 1223.192035, 1223.192035, 0.000000, X, Y) && !ellipse(27264.930000, 27418.618400, 1155.392033, 1155.392033, 0.000000, X, Y) && !ellipse(28650.962189, 26192.938721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27652.065826, 28556.201538, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 21:29:42 2013] Writing fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src16.gif
[Tue Jun 18 21:33:32 2013] Mean detx,y = (-815.69, 502.47) 
[Tue Jun 18 21:33:32 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 21:33:41 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 21:33:41 2013] Setting source spectrum file to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Jun 18 21:33:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Tue Jun 18 21:56:24 2013] Not generating rmf since there are only 35 counts
[Tue Jun 18 21:56:24 2013] rmf not generated due to insufficient counts
[Tue Jun 18 21:57:55 2013] Updating aperture counts using extracted products
[Tue Jun 18 21:57:55 2013] Total counts from fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src16_src_b10.pi.gz = 159.00
[Tue Jun 18 21:57:55 2013] Total counts from fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src16_bgd.pi.gz = 269.00
[Tue Jun 18 21:57:55 2013] Got source and background scale factors 1155212.000000, 5192692.000000
[Tue Jun 18 21:57:55 2013] User source parameters:
  Position = (331.6, 309.0) = 1 46 52.44 -9 29 54.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 99.2 +/- 13.6
  Background aperture counts = 59.8
  Rate = 0.004 +/- 0.0006

[Tue Jun 18 21:57:55 2013] Updating counts from extracted products
[Tue Jun 18 21:57:55 2013] Set source signif. to 99.16/7.74 = 12.82
[Tue Jun 18 21:57:56 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 21:57:56 2013] Using photon index=1.80, rate=0.00438, arf fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src16.arf
[Tue Jun 18 21:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 21:57:56 2013] Updating source flux to 4.4e-14
[Tue Jun 18 21:58:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 21:58:03 2013] xmm0673750101/analysis//spectral/fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete