[Tue Jun 18 14:25:00 2013] Detection parameters:
  Position = (333.5, 326.8) = 1 46 51.88 -9 28 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.8 +/- 8.3
  Background counts = 9.9
  Rate = 0.002 +/- 0.0004

[Tue Jun 18 14:25:00 2013] Off-axis axis estimate = 3.27'
[Tue Jun 18 16:28:01 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 16:28:01 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Tue Jun 18 16:28:01 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.857
[Tue Jun 18 16:28:01 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 8.06"
[Tue Jun 18 17:22:59 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src16.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src16.csv
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src16_1.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src16.csv
[Tue Jun 18 17:23:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jun 18 17:23:00 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Tue Jun 18 17:23:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src16.csv
[Tue Jun 18 17:23:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass0_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 17:23:18 2013] Spatial fit model total counts = 210.089000, observed total counts = 179.000000
[Tue Jun 18 17:23:18 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 18 17:23:18 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 17:23:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 17:23:18 2013] Assessing source extent using major
[Tue Jun 18 17:23:18 2013] Source does appear to be extended
[Tue Jun 18 17:23:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 19:13:55 2013] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Tue Jun 18 19:13:55 2013] Initial guess for spatial extent in simple fitting = 8.06"
[Tue Jun 18 19:13:55 2013] source mask rpix=1.9, npix_max = 22, mask sum = 19, frac = 0.857
[Tue Jun 18 19:13:55 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 8.06"
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Jun 18 20:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src16.csv
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Jun 18 20:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src16.csv
[Tue Jun 18 20:08:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Jun 18 20:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Jun 18 20:08:25 2013] fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Jun 18 20:08:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src16.csv
[Tue Jun 18 20:08:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673750101_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 18 20:08:39 2013] Spatial fit model total counts = 458.195000, observed total counts = 436.000000
[Tue Jun 18 20:08:39 2013] Offset between fit and detection position for source 11 = 5.246477 pixels
[Tue Jun 18 20:08:39 2013] Warning, changing simple spatial fit ID from 16 to 12
[Tue Jun 18 20:08:39 2013] 382.391000 total counts/ 240.198000 bgd. counts: snr = 9.174735
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 5.246477 pixels
  Position = (329.0, 324.1) = 1 46 53.20 -9 28 52.4
  Extent = 15.3 (15.2-30.6)", rotation angle = 0
  Source counts = 142.2 +/- 19.6
  Background counts = 240.2
  Rate = 0.006 +/- 0.0009
[Tue Jun 18 20:08:39 2013] Vigneting correction estimate = 1.000000
[Tue Jun 18 20:08:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 18 20:08:39 2013] Assessing source extent using major axis lower bound
[Tue Jun 18 20:08:39 2013] Source does appear to be extended
[Tue Jun 18 20:08:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 18 20:08:39 2013] Source is confused with source 15
[Tue Jun 18 21:29:42 2013] XMMSAS src. selection expression = ellipse(28578.312000, 28144.520000, 917.394026, 917.394026, 0.000000, X, Y)
[Tue Jun 18 21:29:42 2013] Writing source region out to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src11_src.reg
[Tue Jun 18 21:29:42 2013] Extracting stamp from image fullrun_mos2_xmm0673750101_pi300-10000_cl_sm2.00.img.gz, (276, 271) - (382, 377)
[Tue Jun 18 21:29:42 2013] XMMSAS bgd. selection expression = annulus(28578.312000, 28144.520000, 1528.990044, 3057.980088, X, Y) && !ellipse(27631.030200, 26914.382000, 1442.744042, 1138.040033, 59.472000, X, Y) && !ellipse(28284.623901, 27621.198456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27264.930000, 27418.618400, 1155.392033, 1155.392033, 0.000000, X, Y) && !ellipse(28802.898895, 26830.976776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28650.962189, 26192.938721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27652.065826, 28556.201538, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 18 21:29:42 2013] Writing fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src11.gif
[Tue Jun 18 21:32:53 2013] Mean detx,y = (12.37, 1488.31) 
[Tue Jun 18 21:32:54 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 18 21:33:05 2013] Binned source spectrum to 10 counts/bin
[Tue Jun 18 21:33:05 2013] Setting source spectrum file to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Tue Jun 18 21:33:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Jun 18 21:57:54 2013] Updating aperture counts using extracted products
[Tue Jun 18 21:57:54 2013] Total counts from fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 308.00
[Tue Jun 18 21:57:54 2013] Total counts from fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src11_bgd.pi.gz = 884.00
[Tue Jun 18 21:57:55 2013] Got source and background scale factors 2342824.000000, 15786540.000000
[Tue Jun 18 21:57:55 2013] User source parameters:
  Position = (329.0, 324.1) = 1 46 53.20 -9 28 52.4
  Extent = 15.3 (15.2-30.6)", rotation angle = 0
  Source aperture counts = 176.8 +/- 18.6
  Background aperture counts = 131.2
  Rate = 0.008 +/- 0.0008

[Tue Jun 18 21:57:56 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 21:57:56 2013] Using photon index=1.80, rate=0.00629, arf fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src11.arf
[Tue Jun 18 21:57:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 21:57:56 2013] Updating source flux to 6.2e-14
[Tue Jun 18 21:58:00 2013] Flag p found in src. 11 procflags, skipping spectral fitting
[Tue Jun 18 21:58:00 2013] Flag c found in src. 11 procflags, skipping spectral fitting
[Tue Jun 18 21:58:03 2013] xmm0673750101/analysis//spectral/fullrun_mos2_xmm0673750101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete