[Thu May 30 14:01:00 2013] Detection parameters:
  Position = (112.4, 193.1) = 1 38 32.97 -45 47 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.1 +/- 7.3
  Background counts = 3.8
  Rate = 0.004 +/- 0.001

[Thu May 30 14:01:00 2013] Off-axis axis estimate = 15.50'
[Thu May 30 14:01:18 2013] Using EEF radius (= 14.18 ")to estimate initial spatial extent for simple fitting
[Thu May 30 14:01:18 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 14:01:18 2013] Initial guess for spatial extent in simple fitting = 14.18"
[Thu May 30 14:01:18 2013] source mask rpix=3.3, npix_max = 56, mask sum = 53, frac = 0.937
[Thu May 30 14:01:18 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 14.18"
[Thu May 30 14:01:18 2013] fullrun_mos1_xmm0673740101_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 30 14:01:18 2013] fullrun_mos1_xmm0673740101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 30 14:01:18 2013] Fit fullrun_mos1_xmm0673740101_pi300-10000_cl_pass0_src3 appears to have run properly
[Thu May 30 14:01:18 2013] fullrun_mos1_xmm0673740101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 30 14:01:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673740101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 30 14:01:18 2013] fullrun_mos1_xmm0673740101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 30 14:01:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673740101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 30 14:01:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673740101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673740101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 14:01:27 2013] Spatial fit model total counts = 68.982800, observed total counts = 63.000000
[Thu May 30 14:01:27 2013] Offset between fit and detection position for source 1 = 0.359776 pixels
[Thu May 30 14:01:27 2013] 71.391400 total counts/ 41.791200 bgd. counts: snr = 4.578806
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.359776 pixels
  Position = (112.5, 192.7) = 1 38 32.93 -45 47 54.2
  Extent = 15.7 (10.8-25.9)", rotation angle = 54 (47-60) degrees
  Source counts = 29.6 +/- 8.4
  Background counts = 41.8
  Rate = 0.004 +/- 0.001
[Thu May 30 14:01:27 2013] Vigneting correction estimate = 1.000000
[Thu May 30 14:01:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 14:01:27 2013] Assessing source extent using major axis lower bound
[Thu May 30 14:01:27 2013] Source does appear to be extended
[Thu May 30 14:01:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.29
[Thu May 30 14:01:27 2013] Source is asymmetric
[Thu May 30 14:01:39 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 14:01:39 2013] Initial guess for spatial extent in simple fitting = 9.64"
[Thu May 30 14:01:39 2013] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.847
[Thu May 30 14:01:39 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 9.64"
[Thu May 30 14:01:39 2013] fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 30 14:01:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_src3.csv
[Thu May 30 14:01:39 2013] fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 30 14:01:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_src3.csv
[Thu May 30 14:01:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 14:01:39 2013] fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 30 14:01:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 14:01:39 2013] fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 30 14:01:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 14:01:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0673740101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 14:01:47 2013] Warning, spatial fit 3 centroid is now closest to src. 2
[Thu May 30 14:01:47 2013] Vigneting correction estimate = 1.000000
[Thu May 30 14:01:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 14:01:47 2013] Assessing source extent using major axis lower bound
[Thu May 30 14:01:47 2013] Source does appear to be extended
[Thu May 30 14:01:47 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.29
[Thu May 30 14:01:47 2013] Source is asymmetric
[Thu May 30 14:09:58 2013] XMMSAS src. selection expression = ellipse(9736.492600, 16718.127000, 943.932027, 212.689806, 53.973351, X, Y)
[Thu May 30 14:09:58 2013] Writing source region out to fullrun_mos1_xmm0673740101_pi300-10000_pass1_cl_src1_src.reg
[Thu May 30 14:09:58 2013] Extracting stamp from image fullrun_mos1_xmm0673740101_pi300-10000_cl_sm2.00.img.gz, (58, 138) - (167, 247)
[Thu May 30 14:09:58 2013] XMMSAS bgd. selection expression = annulus(9736.492600, 16718.127000, 1573.220045, 3146.440091, X, Y)
[Thu May 30 14:09:58 2013] Writing fullrun_mos1_xmm0673740101_pi300-10000_pass1_cl_src1.gif
[Thu May 30 14:10:57 2013] Mean detx,y = (16181.96, 4446.31) 
[Thu May 30 14:10:59 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 14:11:28 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 14:11:29 2013] Setting source spectrum file to fullrun_mos1_xmm0673740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 30 14:11:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0673740101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 30 14:11:48 2013] Not generating rmf since there are only 29 counts
[Thu May 30 14:11:48 2013] rmf not generated due to insufficient counts
[Thu May 30 14:16:30 2013] Updating aperture counts using extracted products
[Thu May 30 14:16:30 2013] Total counts from fullrun_mos1_xmm0673740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 26.00
[Thu May 30 14:16:30 2013] Total counts from fullrun_mos1_xmm0673740101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 158.00
[Thu May 30 14:16:30 2013] Got source and background scale factors 453806.000000, 9938908.000000
[Thu May 30 14:16:30 2013] User source parameters:
  Position = (112.5, 192.7) = 1 38 32.93 -45 47 54.2
  Extent = 15.7 (10.8-25.9)", rotation angle = 54 (47-60) degrees
  Source aperture counts = 18.8 +/- 6.2
  Background aperture counts = 7.2
  Rate = 0.003 +/- 0.0009

[Thu May 30 14:16:30 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 14:16:30 2013] Using photon index=1.80, rate=0.00416, arf fullrun_mos1_xmm0673740101_pi300-10000_pass1_cl_src1.arf
[Thu May 30 14:16:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 14:16:31 2013] Updating source flux to 1.3e-13
[Thu May 30 14:16:34 2013] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 14:16:35 2013] xmm0673740101/analysis//spectral/fullrun_mos1_xmm0673740101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete