[Sat May 18 11:56:38 2013] Detection parameters:
  Position = (322.8, 305.0) = 2 42 28.75 -50 48 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.5 +/- 7.7
  Background counts = 4.0
  Rate = 0.004 +/- 0.0008

[Sat May 18 11:56:38 2013] Off-axis axis estimate = 1.83'
[Sat May 18 12:28:10 2013] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Sat May 18 12:28:10 2013] Initial guess for spatial extent in simple fitting = 7.34"
[Sat May 18 12:28:10 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Sat May 18 12:28:10 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.34"
[Sat May 18 12:41:07 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_src5.ximg exists
[Sat May 18 12:41:07 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat May 18 12:41:07 2013] Fit fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_src5 appears to have run properly
[Sat May 18 12:41:07 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat May 18 12:41:07 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat May 18 12:41:07 2013] Fit fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat May 18 12:41:13 2013] Spatial fit model total counts = 92.347000, observed total counts = 87.000000
[Sat May 18 12:41:13 2013] Offset between fit and detection position for source 2 = 0.230784 pixels
[Sat May 18 12:41:13 2013] 91.914400 total counts/ 73.108100 bgd. counts: snr = 2.199483
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.230784 pixels
  Position = (322.9, 304.8) = 2 42 28.70 -50 48 56.7
  Extent = 9.6 (5.4-14.7)", rotation angle = 83 (74-100) degrees
  Source counts = 18.8 +/- 9.6
  Background counts = 73.1
  Rate = 0.002 +/- 0.001
[Sat May 18 12:41:13 2013] Vigneting correction estimate = 1.000000
[Sat May 18 12:41:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 12:41:13 2013] Assessing source extent using major axis lower bound
[Sat May 18 12:41:13 2013] Source does appear to be extended
[Sat May 18 12:41:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.88
[Sat May 18 12:41:13 2013] Source is asymmetric
[Sat May 18 13:08:49 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 18 13:08:49 2013] Initial guess for spatial extent in simple fitting = 5.70"
[Sat May 18 13:08:49 2013] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.222
[Sat May 18 13:08:49 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 5.70"
[Sat May 18 13:18:32 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 18 13:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src4.csv
[Sat May 18 13:18:32 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 18 13:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src4.csv
[Sat May 18 13:18:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 13:18:32 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 18 13:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 18 13:18:32 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 18 13:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat May 18 13:18:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 13:18:37 2013] Warning, spatial fit 4 centroid is now closest to src. 1
[Sat May 18 13:18:37 2013] Vigneting correction estimate = 1.000000
[Sat May 18 13:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 13:18:37 2013] Assessing source extent using major axis lower bound
[Sat May 18 13:18:37 2013] Source does appear to be extended
[Sat May 18 13:18:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.88
[Sat May 18 13:18:37 2013] Source is asymmetric
[Sat May 18 13:37:31 2013] XMMSAS src. selection expression = ellipse(28045.629400, 26470.895400, 573.396016, 110.157003, 82.968900, X, Y)
[Sat May 18 13:37:31 2013] Writing source region out to fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src2_src.reg
[Sat May 18 13:37:31 2013] Extracting stamp from image fullrun_mos2_xmm0673610901_pi300-10000_cl_sm2.00.img.gz, (290, 272) - (356, 338)
[Sat May 18 13:37:31 2013] XMMSAS bgd. selection expression = annulus(28045.629400, 26470.895400, 955.660027, 1911.320055, X, Y) && !ellipse(27061.417389, 27621.554230, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 18 13:37:31 2013] Writing fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src2.gif
[Sat May 18 13:41:39 2013] Mean detx,y = (-930.88, -1051.29) 
[Sat May 18 13:41:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 13:41:47 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 13:41:48 2013] Setting source spectrum file to fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 18 13:41:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 18 13:42:39 2013] Not generating rmf since there are only 18 counts
[Sat May 18 13:42:39 2013] rmf not generated due to insufficient counts
[Sat May 18 13:43:12 2013] Updating aperture counts using extracted products
[Sat May 18 13:43:12 2013] Total counts from fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 24.00
[Sat May 18 13:43:13 2013] Total counts from fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src2_bgd.pi.gz = 182.00
[Sat May 18 13:43:13 2013] Got source and background scale factors 198400.000000, 6924044.000000
[Sat May 18 13:43:13 2013] User source parameters:
  Position = (322.9, 304.8) = 2 42 28.70 -50 48 56.7
  Extent = 9.6 (5.4-14.7)", rotation angle = 83 (74-100) degrees
  Source aperture counts = 18.8 +/- 6.0
  Background aperture counts = 5.2
  Rate = 0.002 +/- 0.0006

[Sat May 18 13:43:13 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 13:43:13 2013] Using photon index=1.80, rate=0.00188, arf fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src2.arf
[Sat May 18 13:43:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 13:43:13 2013] Updating source flux to 3.7e-14
[Sat May 18 13:43:15 2013] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat May 18 13:43:16 2013] xmm0673610901/analysis//spectral/fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete