[Sat May 18 11:56:38 2013] Detection parameters:
  Position = (311.6, 318.0) = 2 42 33.89 -50 47 58.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1205.0 +/- 40.9
  Background counts = 4.0
  Rate = 0.1 +/- 0.004

[Sat May 18 11:56:38 2013] Off-axis axis estimate = 1.71'
[Sat May 18 12:28:10 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat May 18 12:28:10 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sat May 18 12:28:10 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sat May 18 12:28:10 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat May 18 12:41:07 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 18 12:41:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_src1.csv
[Sat May 18 12:41:07 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 18 12:41:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_src1.csv
[Sat May 18 12:41:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 12:41:07 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 18 12:41:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 18 12:41:07 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 18 12:41:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 18 12:41:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673610901_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 12:41:13 2013] Source 1 is offset by -6.090513 and -7.652158 pixels which is larger than
2 X fitted extent = 0.837343 x 0.837343, not incorporating fit results
[Sat May 18 12:41:13 2013] Vigneting correction estimate = 1.000000
[Sat May 18 12:41:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 12:41:13 2013] Assessing source extent using major
[Sat May 18 12:41:13 2013] Source does appear to be extended
[Sat May 18 12:41:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 13:08:49 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat May 18 13:08:49 2013] Initial guess for spatial extent in simple fitting = 7.28"
[Sat May 18 13:08:49 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Sat May 18 13:08:49 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.28"
[Sat May 18 13:18:32 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 18 13:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src1.csv
[Sat May 18 13:18:32 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 18 13:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src1.csv
[Sat May 18 13:18:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 13:18:32 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 18 13:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 18 13:18:32 2013] fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 18 13:18:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat May 18 13:18:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673610901_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 18 13:18:37 2013] Source 1 is offset by -6.090513 and -7.652158 pixels which is larger than
2 X fitted extent = 0.837343 x 0.837343, not incorporating fit results
[Sat May 18 13:18:37 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.498716 pixels away
[Sat May 18 13:18:37 2013] Vigneting correction estimate = 1.000000
[Sat May 18 13:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 18 13:18:37 2013] Assessing source extent using major
[Sat May 18 13:18:37 2013] Source does appear to be extended
[Sat May 18 13:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 18 13:37:31 2013] Counts = 1205.011963, rescaling region sizes by 2.000000
[Sat May 18 13:37:31 2013] XMMSAS src. selection expression = ellipse(27061.417389, 27621.554230, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat May 18 13:37:31 2013] Writing source region out to fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src1_src.reg
[Sat May 18 13:37:31 2013] Extracting stamp from image fullrun_mos2_xmm0673610901_pi300-10000_cl_sm2.00.img.gz, (237, 243) - (387, 393)
[Sat May 18 13:37:31 2013] XMMSAS bgd. selection expression = annulus(27061.417389, 27621.554230, 4350.000000, 8700.000000, X, Y) && !ellipse(25480.215600, 21293.827200, 716.348021, 357.225610, 5.579164, X, Y) && !ellipse(28045.629400, 26470.895400, 764.528022, 146.876004, 82.968900, X, Y) && !ellipse(35433.590040, 22943.512400, 433.204812, 433.204812, 0.000000, X, Y)
[Sat May 18 13:37:31 2013] Writing fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src1.gif
[Sat May 18 13:37:33 2013] Mean detx,y = (69.63, 93.08) 
[Sat May 18 13:37:35 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 18 13:41:00 2013] Binned source spectrum to 10 counts/bin
[Sat May 18 13:41:00 2013] Setting source spectrum file to fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 18 13:41:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 18 13:42:22 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 18 13:42:22 2013] rmf not generated due to insufficient counts
[Sat May 18 13:43:12 2013] Updating aperture counts using extracted products
[Sat May 18 13:43:12 2013] Total counts from fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1283.00
[Sat May 18 13:43:12 2013] Total counts from fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src1_bgd.pi.gz = 2933.00
[Sat May 18 13:43:12 2013] Got source and background scale factors 5005712.000000, 162759319.000000
[Sat May 18 13:43:12 2013] User source parameters:
  Position = (311.6, 318.0) = 2 42 33.89 -50 47 58.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1192.8 +/- 36.8
  Background aperture counts = 90.2
  Rate = 0.1 +/- 0.004

[Sat May 18 13:43:12 2013] Updating counts from extracted products
[Sat May 18 13:43:12 2013] Set source signif. to 1192.79/9.50 = 125.59
[Sat May 18 13:43:13 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 18 13:43:13 2013] Using photon index=1.80, rate=0.119, arf fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src1.arf
[Sat May 18 13:43:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 18 13:43:13 2013] Updating source flux to 1.4e-12
[Sat May 18 13:43:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 18 13:43:16 2013] xmm0673610901/analysis//spectral/fullrun_mos2_xmm0673610901_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete