[Fri Jun 14 00:51:47 2013] Detection parameters:
  Position = (274.3, 302.1) = 2 42 33.73 -50 47 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1497.6 +/- 45.8
  Background counts = 6.6
  Rate = 0.2 +/- 0.006

[Fri Jun 14 00:51:47 2013] Off-axis axis estimate = 1.77'
[Fri Jun 14 01:02:36 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:02:36 2013] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Jun 14 01:02:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Fri Jun 14 01:02:36 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Fri Jun 14 01:07:25 2013] fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 14 01:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 01:07:25 2013] fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 14 01:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 14 01:07:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:07:25 2013] fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 14 01:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 14 01:07:25 2013] fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 14 01:07:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 14 01:07:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673610201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:07:27 2013] Source 1 is offset by -6.438446 and 5.839478 pixels which is larger than
2 X fitted extent = 0.840699 x 0.840699, not incorporating fit results
[Fri Jun 14 01:07:27 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 01:07:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 01:07:27 2013] Assessing source extent using major
[Fri Jun 14 01:07:27 2013] Source does appear to be extended
[Fri Jun 14 01:07:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 01:15:00 2013] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:15:00 2013] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Jun 14 01:15:00 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Fri Jun 14 01:15:00 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.31"
[Fri Jun 14 01:18:48 2013] fullrun_mos2_xmm0673610201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 14 01:18:48 2013] fullrun_mos2_xmm0673610201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 14 01:18:49 2013] Fit fullrun_mos2_xmm0673610201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun 14 01:18:49 2013] fullrun_mos2_xmm0673610201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 14 01:18:49 2013] fullrun_mos2_xmm0673610201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 14 01:18:49 2013] Fit fullrun_mos2_xmm0673610201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 14 01:18:51 2013] Spatial fit model total counts = 1439.470000, observed total counts = 1373.000000
[Fri Jun 14 01:18:51 2013] Offset between fit and detection position for source 1 = 0.104056 pixels
[Fri Jun 14 01:18:51 2013] 1451.585000 total counts/ 428.455000 bgd. counts: snr = 49.428589
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.104056 pixels
  Position = (274.3, 302.2) = 2 42 33.74 -50 47 59.6
  Extent = 6.0 (5.5-6.4)" x 4.7 (4.3-5.0)", rotation angle = 73 (61-83) degrees
  Source counts = 1023.1 +/- 38.1
  Background counts = 428.5
  Rate = 0.1 +/- 0.005
[Fri Jun 14 01:18:51 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 01:18:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 01:18:51 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 01:18:51 2013] Source does appear to be extended
[Fri Jun 14 01:18:51 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Fri Jun 14 01:28:48 2013] Counts = 1023.130000, rescaling region sizes by 2.000000
[Fri Jun 14 01:28:48 2013] XMMSAS src. selection expression = ellipse(23812.669800, 26244.278400, 714.306021, 559.345216, 72.653842, X, Y)
[Fri Jun 14 01:28:48 2013] Writing source region out to fullrun_mos2_xmm0673610201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 14 01:28:48 2013] Extracting stamp from image fullrun_mos2_xmm0673610201_pi300-10000_cl_sm2.00.img.gz, (233, 261) - (315, 343)
[Fri Jun 14 01:28:48 2013] XMMSAS bgd. selection expression = annulus(23812.669800, 26244.278400, 2381.020069, 4762.040137, X, Y)
[Fri Jun 14 01:28:48 2013] Writing fullrun_mos2_xmm0673610201_pi300-10000_pass1_cl_src1.gif
[Fri Jun 14 01:28:49 2013] Mean detx,y = (49.44, 170.00) 
[Fri Jun 14 01:28:50 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 01:29:05 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 01:29:06 2013] Setting source spectrum file to fullrun_mos2_xmm0673610201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 14 01:29:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673610201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 14 01:33:25 2013] Updating aperture counts using extracted products
[Fri Jun 14 01:33:25 2013] Total counts from fullrun_mos2_xmm0673610201_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1319.00
[Fri Jun 14 01:33:25 2013] Total counts from fullrun_mos2_xmm0673610201_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1494.00
[Fri Jun 14 01:33:25 2013] Got source and background scale factors 1207076.000000, 52057952.000000
[Fri Jun 14 01:33:25 2013] User source parameters:
  Position = (274.3, 302.2) = 2 42 33.74 -50 47 59.6
  Extent = 6.0 (5.5-6.4)" x 4.7 (4.3-5.0)", rotation angle = 73 (61-83) degrees
  Source aperture counts = 1284.4 +/- 37.3
  Background aperture counts = 34.6
  Rate = 0.2 +/- 0.005

[Fri Jun 14 01:33:26 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 01:33:26 2013] Using photon index=1.80, rate=0.137, arf fullrun_mos2_xmm0673610201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 14 01:33:26 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 01:33:26 2013] Updating source flux to 1.8e-12
[Fri Jun 14 01:33:27 2013] Flag b found in src. 1 procflags, skipping spectral fitting
[Fri Jun 14 01:33:28 2013] xmm0673610201/analysis//spectral/fullrun_mos2_xmm0673610201_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete