[Fri May 31 09:02:32 2013] Detection parameters:
  Position = (254.7, 305.9) = 13 25 36.89 -38 25 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 610.7 +/- 38.5
  Background counts = 414.8
  Rate = 0.005 +/- 0.0003

[Fri May 31 09:02:32 2013] Off-axis axis estimate = 3.22'
[Fri May 31 09:13:54 2013] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Fri May 31 09:13:54 2013] Initial guess for spatial extent in simple fitting = 8.04"
[Fri May 31 09:13:54 2013] source mask rpix=1.8, npix_max = 22, mask sum = 19, frac = 0.862
[Fri May 31 09:13:54 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 8.04"
[Fri May 31 10:55:33 2013] fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_src24.ximg exists
[Fri May 31 10:55:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_src24.csv
[Fri May 31 10:55:33 2013] fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_src24_1.ximg exists
[Fri May 31 10:55:33 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_src24.csv
[Fri May 31 10:55:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 10:55:34 2013] fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Fri May 31 10:55:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 31 10:55:34 2013] fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Fri May 31 10:55:34 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src24.csv
[Fri May 31 10:55:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 13:13:26 2013] Spatial fit model total counts = -355.136000, observed total counts = 3448.000000
[Fri May 31 13:13:26 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 13:13:26 2013] Vigneting correction estimate = 1.000000
[Fri May 31 13:13:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 13:13:26 2013] Assessing source extent using major
[Fri May 31 13:13:26 2013] Source does appear to be extended
[Fri May 31 13:13:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 13:13:59 2013] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Fri May 31 13:13:59 2013] Initial guess for spatial extent in simple fitting = 8.04"
[Fri May 31 13:13:59 2013] source mask rpix=1.8, npix_max = 22, mask sum = 19, frac = 0.862
[Fri May 31 13:13:59 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 8.04"
[Fri May 31 14:54:58 2013] fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_src23.ximg exists
[Fri May 31 14:54:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_src23.csv
[Fri May 31 14:54:58 2013] fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri May 31 14:54:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_src23.csv
[Fri May 31 14:54:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 14:54:59 2013] fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri May 31 14:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 31 14:54:59 2013] fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri May 31 14:54:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri May 31 14:54:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673580401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 16:12:30 2013] Spatial fit model total counts = 5493.660000, observed total counts = 3448.000000
[Fri May 31 16:12:30 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 31 16:12:30 2013] Vigneting correction estimate = 1.000000
[Fri May 31 16:12:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 16:12:30 2013] Assessing source extent using major
[Fri May 31 16:12:30 2013] Source does appear to be extended
[Fri May 31 16:12:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 16:12:54 2013] XMMSAS src. selection expression = ellipse(22106.945541, 26568.577576, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 16:12:54 2013] Writing source region out to fullrun_pn_xmm0673580401_pi300-10000_pass1_cl_src31_src.reg
[Fri May 31 16:12:54 2013] Extracting stamp from image fullrun_pn_xmm0673580401_pi300-10000_cl_sm2.00.img.gz, (217, 268) - (292, 343)
[Fri May 31 16:12:54 2013] XMMSAS bgd. selection expression = annulus(22106.945541, 26568.577576, 1087.500000, 2175.000000, X, Y) && !ellipse(25138.069031, 28778.953186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21031.808200, 27808.318200, 363.208010, 363.208010, 0.000000, X, Y) && !ellipse(23361.403076, 27144.588837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22248.210358, 27398.728241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22712.020081, 26823.335602, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 16:12:54 2013] Writing fullrun_pn_xmm0673580401_pi300-10000_pass1_cl_src31.gif
[Fri May 31 17:27:40 2013] Mean detx,y = (-4220.07, -750.23) 
[Fri May 31 17:27:52 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 17:28:21 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 17:28:22 2013] Setting source spectrum file to fullrun_pn_xmm0673580401_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri May 31 17:28:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673580401_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri May 31 18:56:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 18:56:02 2013] rmf not generated due to insufficient counts
[Fri May 31 20:43:45 2013] Updating aperture counts using extracted products
[Fri May 31 20:43:45 2013] Total counts from fullrun_pn_xmm0673580401_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 2349.00
[Fri May 31 20:43:45 2013] Total counts from fullrun_pn_xmm0673580401_pi300-10000_pass1_cl_src31_bgd.pi.gz = 9789.00
[Fri May 31 20:43:45 2013] Got source and background scale factors 895358.000000, 6951948.000000
[Fri May 31 20:43:45 2013] User source parameters:
  Position = (254.7, 305.9) = 13 25 36.89 -38 25 51.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1088.3 +/- 49.5
  Background aperture counts = 1260.7
  Rate = 0.01 +/- 0.0004

[Fri May 31 20:43:45 2013] Updating counts from extracted products
[Fri May 31 20:43:45 2013] Set source signif. to 1088.25/35.51 = 30.65
[Fri May 31 20:43:53 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 20:43:53 2013] Using photon index=1.80, rate=0.00962, arf fullrun_pn_xmm0673580401_pi300-10000_pass1_cl_src31.arf
[Fri May 31 20:43:53 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 20:43:53 2013] Updating source flux to 4.1e-14
[Fri May 31 20:44:21 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 20:44:34 2013] xmm0673580401/analysis//spectral/fullrun_pn_xmm0673580401_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete