[Fri May 31 09:03:42 2013] Detection parameters:
  Position = (313.2, 324.3) = 13 25 15.21 -38 24 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.1 +/- 24.4
  Background counts = 98.5
  Rate = 0.001 +/- 0.0002

[Fri May 31 09:03:44 2013] Off-axis axis estimate = 2.16'
[Fri May 31 11:57:37 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Fri May 31 11:57:37 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Fri May 31 11:57:37 2013] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.908
[Fri May 31 11:57:37 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 7.51"
[Fri May 31 13:13:12 2013] fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_src22.ximg exists
[Fri May 31 13:13:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_src22.csv
[Fri May 31 13:13:12 2013] fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri May 31 13:13:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_src22.csv
[Fri May 31 13:13:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 13:13:12 2013] fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri May 31 13:13:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri May 31 13:13:13 2013] fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri May 31 13:13:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src22.csv
[Fri May 31 13:13:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673580401_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 31 13:13:41 2013] Source 15 is offset by 4.045752 and 3.331499 pixels which is larger than
2 X fitted extent = 3.445954 x 3.445954, not incorporating fit results
[Fri May 31 13:13:41 2013] Source 15 is offset by 7.136281 and 2.563511 pixels which is larger than
2 X fitted extent = 6.329655 x 6.329655, not incorporating fit results
[Fri May 31 13:13:41 2013] Vigneting correction estimate = 1.000000
[Fri May 31 13:13:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 13:13:41 2013] Assessing source extent using major
[Fri May 31 13:13:41 2013] Source does appear to be extended
[Fri May 31 13:13:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 13:13:41 2013] Source is confused with source 17
[Fri May 31 15:21:03 2013] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Fri May 31 15:21:03 2013] Initial guess for spatial extent in simple fitting = 7.51"
[Fri May 31 15:21:03 2013] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.908
[Fri May 31 15:21:03 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.51"
[Fri May 31 16:12:20 2013] fullrun_mos2_xmm0673580401_pi300-10000_cl_pass1_src17.ximg exists
[Fri May 31 16:12:20 2013] fullrun_mos2_xmm0673580401_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri May 31 16:12:20 2013] Fit fullrun_mos2_xmm0673580401_pi300-10000_cl_pass1_src17 appears to have run properly
[Fri May 31 16:12:21 2013] fullrun_mos2_xmm0673580401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri May 31 16:12:21 2013] fullrun_mos2_xmm0673580401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri May 31 16:12:21 2013] Fit fullrun_mos2_xmm0673580401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri May 31 16:12:39 2013] Source 15 is offset by -6.673236 and 4.277556 pixels which is larger than
2 X fitted extent = 6.469701 x 6.469701, not incorporating fit results
[Fri May 31 16:12:39 2013] Vigneting correction estimate = 1.000000
[Fri May 31 16:12:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 31 16:12:39 2013] Assessing source extent using major
[Fri May 31 16:12:39 2013] Source does appear to be extended
[Fri May 31 16:12:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 31 19:50:39 2013] XMMSAS src. selection expression = ellipse(27202.622467, 28167.011414, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 31 19:50:39 2013] Writing source region out to fullrun_mos2_xmm0673580401_pi300-10000_pass1_cl_src15_src.reg
[Fri May 31 19:50:39 2013] Extracting stamp from image fullrun_mos2_xmm0673580401_pi300-10000_cl_sm2.00.img.gz, (276, 287) - (351, 362)
[Fri May 31 19:50:39 2013] XMMSAS bgd. selection expression = annulus(27202.622467, 28167.011414, 1087.500000, 2175.000000, X, Y) && !ellipse(26207.786400, 27949.347000, 1335.868838, 1204.471235, 335.634900, X, Y) && !ellipse(26621.895874, 28849.165436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27390.342000, 27686.624000, 987.216028, 166.752005, 357.632090, X, Y) && !ellipse(27942.276459, 27013.563141, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 31 19:50:39 2013] Writing fullrun_mos2_xmm0673580401_pi300-10000_pass1_cl_src15.gif
[Fri May 31 20:03:58 2013] Mean detx,y = (-714.29, -119.44) 
[Fri May 31 20:04:01 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 31 20:04:15 2013] Binned source spectrum to 10 counts/bin
[Fri May 31 20:04:15 2013] Setting source spectrum file to fullrun_mos2_xmm0673580401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri May 31 20:04:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673580401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri May 31 20:35:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 31 20:35:04 2013] rmf not generated due to insufficient counts
[Fri May 31 20:44:02 2013] Updating aperture counts using extracted products
[Fri May 31 20:44:02 2013] Total counts from fullrun_mos2_xmm0673580401_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 2380.00
[Fri May 31 20:44:02 2013] Total counts from fullrun_mos2_xmm0673580401_pi300-10000_pass1_cl_src15_bgd.pi.gz = 3197.00
[Fri May 31 20:44:02 2013] Got source and background scale factors 1176536.000000, 5802776.000000
[Fri May 31 20:44:02 2013] User source parameters:
  Position = (313.2, 324.3) = 13 25 15.21 -38 24 42.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1731.8 +/- 49.8
  Background aperture counts = 648.2
  Rate = 0.01 +/- 0.0004

[Fri May 31 20:44:02 2013] Updating counts from extracted products
[Fri May 31 20:44:02 2013] Set source signif. to 1731.80/25.46 = 68.02
[Fri May 31 20:44:03 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 31 20:44:03 2013] Using photon index=1.80, rate=0.0141, arf fullrun_mos2_xmm0673580401_pi300-10000_pass1_cl_src15.arf
[Fri May 31 20:44:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 31 20:44:03 2013] Updating source flux to 1.4e-13
[Fri May 31 20:44:10 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 31 20:44:21 2013] xmm0673580401/analysis//spectral/fullrun_mos2_xmm0673580401_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete