[Mon Sep  3 15:16:04 2012] Detection parameters:
  Position = (346.2, 211.1) = 13 25 3.74 -38 32 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 398.4 +/- 34.7
  Background counts = 280.9
  Rate = 0.006 +/- 0.0005

[Mon Sep  3 15:16:05 2012] Off-axis axis estimate = 7.22'
[Mon Sep  3 15:24:11 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 15:24:11 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Mon Sep  3 15:24:11 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.142
[Mon Sep  3 15:24:11 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 10.04"
[Mon Sep  3 17:38:29 2012] fullrun_pn_xmm0673580101_pi300-10000_cl_pass0_src62.ximg exists
[Mon Sep  3 17:38:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673580101_pi300-10000_cl_pass0_src62.csv
[Mon Sep  3 17:38:29 2012] fullrun_pn_xmm0673580101_pi300-10000_cl_pass0_src62_1.ximg exists
[Mon Sep  3 17:38:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673580101_pi300-10000_cl_pass0_src62.csv
[Mon Sep  3 17:38:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673580101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673580101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 17:38:31 2012] fullrun_pn_xmm0673580101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Mon Sep  3 17:38:31 2012] fullrun_pn_xmm0673580101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Mon Sep  3 17:38:31 2012] Fit fullrun_pn_xmm0673580101_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Mon Sep  3 18:32:49 2012] Spatial fit model total counts = 3760.530000, observed total counts = 3760.000000
[Mon Sep  3 18:32:49 2012] Offset between fit and detection position for source 65 = 6.253084 pixels
[Mon Sep  3 18:32:49 2012] 3732.450000 total counts/ 2639.280000 bgd. counts: snr = 21.278694
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 6.253084 pixels
  Position = (343.7, 216.9) = 13 25 4.66 -38 32 26.9
  Extent = 19.7 (19.1-20.1)", rotation angle = 0
  Source counts = 1093.2 +/- 61.1
  Background counts = 2639.3
  Rate = 0.01 +/- 0.0007
[Mon Sep  3 18:32:50 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 18:32:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 18:32:50 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 18:32:50 2012] Source does appear to be extended
[Mon Sep  3 18:32:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 18:32:50 2012] Source is confused with source 60
[Mon Sep  3 18:33:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:33:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 18:33:08 2012] Initial guess for spatial extent in simple fitting = 19.75"
[Mon Sep  3 18:33:08 2012] source mask rpix=4.5, npix_max = 101, mask sum = 100, frac = 0.984
[Mon Sep  3 18:33:08 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 19.75"
[Mon Sep  3 20:59:22 2012] fullrun_pn_xmm0673580101_pi300-10000_cl_pass1_src59.ximg exists
[Mon Sep  3 20:59:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673580101_pi300-10000_cl_pass1_src59.csv
[Mon Sep  3 20:59:22 2012] fullrun_pn_xmm0673580101_pi300-10000_cl_pass1_src59_1.ximg exists
[Mon Sep  3 20:59:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673580101_pi300-10000_cl_pass1_src59.csv
[Mon Sep  3 20:59:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673580101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673580101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 20:59:23 2012] fullrun_pn_xmm0673580101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Mon Sep  3 20:59:23 2012] fullrun_pn_xmm0673580101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Mon Sep  3 20:59:23 2012] Fit fullrun_pn_xmm0673580101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Mon Sep  3 21:35:24 2012] Warning, spatial fit 59 centroid is now closest to src. 56
[Mon Sep  3 21:35:24 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 21:35:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 21:35:24 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 21:35:24 2012] Source does appear to be extended
[Mon Sep  3 21:35:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 21:35:43 2012] Counts = 1093.170000, rescaling region sizes by 2.000000
[Mon Sep  3 21:35:43 2012] XMMSAS src. selection expression = ellipse(29853.994600, 18818.376000, 2369.772068, 2369.772068, 0.000000, X, Y)
[Mon Sep  3 21:35:43 2012] Writing source region out to fullrun_pn_xmm0673580101_pi300-10000_pass1_cl_src65_src.reg
[Mon Sep  3 21:35:43 2012] Extracting stamp from image fullrun_pn_xmm0673580101_pi300-10000_cl_sm2.00.img.gz, (208, 81) - (480, 353)
[Mon Sep  3 21:35:43 2012] XMMSAS bgd. selection expression = annulus(29853.994600, 18818.376000, 7899.240227, 15798.480455, X, Y) && !ellipse(26399.200500, 27884.266800, 1457.313642, 1457.313642, 0.000000, X, Y) && !ellipse(26524.854553, 29149.860779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15415.030487, 14067.750473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26341.327800, 34733.843060, 384.547104, 384.547104, 0.000000, X, Y) && !ellipse(32432.812469, 33833.032440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34739.090393, 32518.288483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24740.831512, 32332.056763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16001.635315, 32189.794983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21764.814400, 14453.822600, 461.371213, 461.371213, 0.000000, X, Y) && !ellipse(20185.373600, 30177.117000, 374.983211, 374.983211, 0.000000, X, Y) && !ellipse(27654.904053, 29745.989197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25821.855896, 29032.035889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37562.998138, 28108.104279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22148.133011, 27591.278931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33133.312744, 27480.585449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21223.931915, 27716.644104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22793.879944, 26940.587006, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22261.721802, 26825.417145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31130.921509, 26211.295593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27263.911163, 25797.572998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27725.420400, 24504.464000, 1157.528033, 1157.528033, 0.000000, X, Y) && !ellipse(31512.605865, 24768.908447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27972.918090, 23793.088876, 1225.800035, 362.233240, 68.908835, X, Y) && !ellipse(23635.518921, 23601.330109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30906.152039, 23169.173645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23037.581600, 23171.886800, 346.033610, 346.033610, 0.000000, X, Y) && !ellipse(28318.828000, 22751.558000, 1327.440038, 1327.440038, 0.000000, X, Y) && !ellipse(36910.065369, 22454.840668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28410.388000, 22589.312000, 1255.768036, 1255.768036, 0.000000, X, Y) && !ellipse(40116.969055, 22159.335907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.262000, 21926.568000, 1380.080040, 1380.080040, 0.000000, X, Y) && !ellipse(15379.390701, 14460.972260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29066.803497, 21006.404037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17316.922226, 14589.557983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29204.601618, 20629.008484, 2981.408086, 410.389550, 68.522928, X, Y) && !ellipse(29591.196788, 19604.797387, 3114.464090, 419.578112, 69.610501, X, Y) && !ellipse(36445.998108, 19212.289230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29762.653400, 19150.710160, 2981.408086, 396.975211, 69.023000, X, Y) && !ellipse(32154.437958, 19096.652084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30526.018600, 17182.012760, 3457.888099, 432.236012, 68.606500, X, Y) && !ellipse(34758.777435, 17531.537537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32574.652100, 17037.553406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30558.950200, 17065.570000, 1465.776042, 1465.776042, 0.000000, X, Y) && !ellipse(25238.070709, 17021.682968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30947.243600, 16020.474000, 1810.352052, 1810.352052, 0.000000, X, Y) && !ellipse(33824.100922, 16243.888153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26231.633118, 15974.854034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25756.974945, 15576.476181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31177.570374, 15435.713165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31379.066000, 14961.850000, 1808.960052, 1808.960052, 0.000000, X, Y)
[Mon Sep  3 21:35:43 2012] Writing fullrun_pn_xmm0673580101_pi300-10000_pass1_cl_src65.gif
[Mon Sep  3 23:18:20 2012] Mean detx,y = (111.37, 9446.79) 
[Mon Sep  3 23:18:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Sep  3 23:24:01 2012] grppha failed
[Mon Sep  3 23:24:02 2012] Setting source spectrum file to fullrun_pn_xmm0673580101_pi300-10000_pass1_cl_src65_src.pi.gz
[Mon Sep  3 23:24:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0673580101_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Tue Sep  4 00:20:03 2012] Updating aperture counts using extracted products
[Tue Sep  4 00:20:03 2012] Error reading totcts from fullrun_pn_xmm0673580101_pi300-10000_pass1_cl_src65_src.pi.gz
[Tue Sep  4 00:20:04 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 00:20:08 2012] Flag c found in src. 65 procflags, skipping spectral fitting
[Tue Sep  4 00:20:08 2012] Source 65 has no response, skipping
[Tue Sep  4 00:20:09 2012] xmm0673580101/analysis//spectral/fullrun_pn_xmm0673580101_pi300-10000_pass1_cl_src65_pl.csv not found, spectral fit skipped or did not complete