[Sat Jun 15 20:29:41 2013] Detection parameters:
  Position = (286.3, 318.8) = 12 53 16.67 -77 7 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 260.3 +/- 19.3
  Background counts = 3.4
  Rate = 0.02 +/- 0.002

[Sat Jun 15 20:29:41 2013] Off-axis axis estimate = 1.72'
[Sat Jun 15 20:39:15 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:39:15 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 15 20:39:15 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Sat Jun 15 20:39:15 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun 15 20:43:02 2013] fullrun_mos2_xmm0673541501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 15 20:43:02 2013] fullrun_mos2_xmm0673541501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 15 20:43:02 2013] Fit fullrun_mos2_xmm0673541501_pi300-10000_cl_pass0_src1 appears to have run properly
[Sat Jun 15 20:43:02 2013] fullrun_mos2_xmm0673541501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 15 20:43:02 2013] fullrun_mos2_xmm0673541501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 15 20:43:02 2013] Fit fullrun_mos2_xmm0673541501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 15 20:43:04 2013] Spatial fit model total counts = 286.080000, observed total counts = 273.000000
[Sat Jun 15 20:43:04 2013] Offset between fit and detection position for source 1 = 0.268102 pixels
[Sat Jun 15 20:43:04 2013] 289.690000 total counts/ 123.371000 bgd. counts: snr = 14.973914
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.268102 pixels
  Position = (286.1, 318.7) = 12 53 17.00 -77 7 9.9
  Extent = 4.7 (4.1-5.5)", rotation angle = 0
  Source counts = 166.3 +/- 17.0
  Background counts = 123.4
  Rate = 0.01 +/- 0.001
[Sat Jun 15 20:43:04 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:43:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:43:04 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:43:04 2013] Source does appear to be extended
[Sat Jun 15 20:43:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:50:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:50:41 2013] Initial guess for spatial extent in simple fitting = 4.67"
[Sat Jun 15 20:50:41 2013] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.210
[Sat Jun 15 20:50:41 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 4.67"
[Sat Jun 15 20:54:37 2013] fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 15 20:54:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 20:54:37 2013] fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 15 20:54:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_src1.csv
[Sat Jun 15 20:54:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:54:37 2013] fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 15 20:54:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 20:54:37 2013] fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 15 20:54:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 15 20:54:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673541501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:54:39 2013] Spatial fit model total counts = 158.934000, observed total counts = 271.000000
[Sat Jun 15 20:54:39 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:54:39 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:54:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:54:39 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:54:39 2013] Source does appear to be extended
[Sat Jun 15 20:54:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 21:01:57 2013] XMMSAS src. selection expression = ellipse(24839.864080, 27677.379200, 280.447208, 280.447208, 0.000000, X, Y)
[Sat Jun 15 21:01:57 2013] Writing source region out to fullrun_mos2_xmm0673541501_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 15 21:01:57 2013] Extracting stamp from image fullrun_mos2_xmm0673541501_pi300-10000_cl_sm2.00.img.gz, (270, 303) - (302, 335)
[Sat Jun 15 21:01:57 2013] XMMSAS bgd. selection expression = annulus(24839.864080, 27677.379200, 467.412013, 934.824027, X, Y)
[Sat Jun 15 21:01:57 2013] Writing fullrun_mos2_xmm0673541501_pi300-10000_pass1_cl_src1.gif
[Sat Jun 15 21:01:58 2013] Mean detx,y = (29.64, 76.98) 
[Sat Jun 15 21:01:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 21:02:05 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 21:02:05 2013] Setting source spectrum file to fullrun_mos2_xmm0673541501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 15 21:02:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673541501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 15 21:06:31 2013] Updating aperture counts using extracted products
[Sat Jun 15 21:06:31 2013] Total counts from fullrun_mos2_xmm0673541501_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 185.00
[Sat Jun 15 21:06:31 2013] Total counts from fullrun_mos2_xmm0673541501_pi300-10000_pass1_cl_src1_bgd.pi.gz = 60.00
[Sat Jun 15 21:06:31 2013] Got source and background scale factors 243200.000000, 1823612.000000
[Sat Jun 15 21:06:31 2013] User source parameters:
  Position = (286.1, 318.7) = 12 53 17.00 -77 7 9.9
  Extent = 4.7 (4.1-5.5)", rotation angle = 0
  Source aperture counts = 177.0 +/- 14.6
  Background aperture counts = 8.0
  Rate = 0.02 +/- 0.001

[Sat Jun 15 21:06:31 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 15 21:06:31 2013] Using photon index=1.80, rate=0.0143, arf fullrun_mos2_xmm0673541501_pi300-10000_pass1_cl_src1.arf
[Sat Jun 15 21:06:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 15 21:06:31 2013] Updating source flux to 2.2e-13
[Sat Jun 15 21:06:33 2013] Flag p found in src. 1 procflags, skipping spectral fitting
[Sat Jun 15 21:06:34 2013] xmm0673541501/analysis//spectral/fullrun_mos2_xmm0673541501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete