[Fri May 24 03:48:12 2013] Detection parameters:
  Position = (327.1, 307.2) = 16 33 17.96 47 18 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.5 +/- 17.4
  Background counts = 46.2
  Rate = 0.004 +/- 0.0006

[Fri May 24 03:48:12 2013] Off-axis axis estimate = 2.18'
[Fri May 24 05:08:14 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:08:14 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Fri May 24 05:08:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Fri May 24 05:08:14 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.52"
[Fri May 24 05:39:05 2013] fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_src8.ximg exists
[Fri May 24 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_src8.csv
[Fri May 24 05:39:05 2013] fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri May 24 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_src8.csv
[Fri May 24 05:39:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 05:39:05 2013] fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri May 24 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 24 05:39:05 2013] fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri May 24 05:39:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 24 05:39:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673270201_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 05:39:24 2013] Source 11 is offset by 6.435988 and -3.093184 pixels which is larger than
2 X fitted extent = 0.837664 x 0.837664, not incorporating fit results
[Fri May 24 05:39:24 2013] Spatial fit model total counts = 411.372000, observed total counts = 372.000000
[Fri May 24 05:39:24 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 05:39:24 2013] Vigneting correction estimate = 1.000000
[Fri May 24 05:39:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 05:39:24 2013] Assessing source extent using major
[Fri May 24 05:39:24 2013] Source does appear to be extended
[Fri May 24 05:39:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 07:05:28 2013] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Fri May 24 07:05:28 2013] Initial guess for spatial extent in simple fitting = 7.52"
[Fri May 24 07:05:28 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.806
[Fri May 24 07:05:28 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.52"
[Fri May 24 07:35:48 2013] fullrun_mos2_xmm0673270201_pi300-10000_cl_pass1_src8.ximg exists
[Fri May 24 07:35:48 2013] fullrun_mos2_xmm0673270201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri May 24 07:35:48 2013] Fit fullrun_mos2_xmm0673270201_pi300-10000_cl_pass1_src8 appears to have run properly
[Fri May 24 07:35:48 2013] fullrun_mos2_xmm0673270201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri May 24 07:35:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673270201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 24 07:35:48 2013] fullrun_mos2_xmm0673270201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri May 24 07:35:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673270201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 24 07:35:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673270201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673270201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 07:36:06 2013] Spatial fit model total counts = 412.586000, observed total counts = 372.000000
[Fri May 24 07:36:06 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 07:36:06 2013] Vigneting correction estimate = 1.000000
[Fri May 24 07:36:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 07:36:06 2013] Assessing source extent using major
[Fri May 24 07:36:06 2013] Source does appear to be extended
[Fri May 24 07:36:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 07:36:06 2013] Source is confused with source 7
[Fri May 24 09:21:45 2013] XMMSAS src. selection expression = ellipse(28412.444977, 26678.378967, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 24 09:21:45 2013] Writing source region out to fullrun_mos2_xmm0673270201_pi300-10000_pass1_cl_src11_src.reg
[Fri May 24 09:21:45 2013] Extracting stamp from image fullrun_mos2_xmm0673270201_pi300-10000_cl_sm2.00.img.gz, (290, 270) - (365, 345)
[Fri May 24 09:21:45 2013] XMMSAS bgd. selection expression = annulus(28412.444977, 26678.378967, 1087.500000, 2175.000000, X, Y) && !ellipse(27273.339172, 27467.132416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26209.442240, 25660.842600, 282.780808, 282.780808, 0.000000, X, Y) && !ellipse(29659.379800, 27367.637600, 272.952008, 272.952008, 0.000000, X, Y) && !ellipse(29239.571400, 27397.182800, 1594.736046, 378.172011, 8.835330, X, Y)
[Fri May 24 09:21:45 2013] Writing fullrun_mos2_xmm0673270201_pi300-10000_pass1_cl_src11.gif
[Fri May 24 09:26:48 2013] Mean detx,y = (-1163.91, -538.65) 
[Fri May 24 09:26:49 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 09:27:00 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 09:27:00 2013] Setting source spectrum file to fullrun_mos2_xmm0673270201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri May 24 09:27:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673270201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri May 24 09:33:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 24 09:33:15 2013] rmf not generated due to insufficient counts
[Fri May 24 09:34:42 2013] Updating aperture counts using extracted products
[Fri May 24 09:34:42 2013] Total counts from fullrun_mos2_xmm0673270201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 276.00
[Fri May 24 09:34:42 2013] Total counts from fullrun_mos2_xmm0673270201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 851.00
[Fri May 24 09:34:42 2013] Got source and background scale factors 1286296.000000, 8160330.000000
[Fri May 24 09:34:42 2013] User source parameters:
  Position = (327.1, 307.2) = 16 33 17.96 47 18 19.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 141.9 +/- 17.6
  Background aperture counts = 134.1
  Rate = 0.005 +/- 0.0007

[Fri May 24 09:34:42 2013] Updating counts from extracted products
[Fri May 24 09:34:42 2013] Set source signif. to 141.86/11.58 = 12.25
[Fri May 24 09:34:43 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 09:34:43 2013] Using photon index=1.80, rate=0.00539, arf fullrun_mos2_xmm0673270201_pi300-10000_pass1_cl_src11.arf
[Fri May 24 09:34:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 09:34:43 2013] Updating source flux to 5.1e-14
[Fri May 24 09:34:47 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 24 09:34:48 2013] xmm0673270201/analysis//spectral/fullrun_mos2_xmm0673270201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete