[Sun Jun 16 22:34:28 2013] Detection parameters:
  Position = (266.1, 378.2) = 20 3 52.38 -55 52 10.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.4 +/- 15.8
  Background counts = 19.5
  Rate = 0.006 +/- 0.0007

[Sun Jun 16 22:34:28 2013] Off-axis axis estimate = 6.24'
[Sun Jun 16 23:59:44 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Sun Jun 16 23:59:44 2013] Initial guess for spatial extent in simple fitting = 9.55"
[Sun Jun 16 23:59:44 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.240
[Sun Jun 16 23:59:44 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.55"
[Mon Jun 17 00:32:59 2013] fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jun 17 00:32:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_src4.csv
[Mon Jun 17 00:32:59 2013] fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jun 17 00:32:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_src4.csv
[Mon Jun 17 00:32:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:32:59 2013] fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jun 17 00:32:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun 17 00:32:59 2013] fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jun 17 00:32:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jun 17 00:32:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673180401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:33:13 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.939163 pixels away
[Mon Jun 17 00:33:13 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:33:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:33:13 2013] Assessing source extent using major
[Mon Jun 17 00:33:13 2013] Source does appear to be extended
[Mon Jun 17 00:33:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 02:23:15 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 02:23:15 2013] Initial guess for spatial extent in simple fitting = 9.55"
[Mon Jun 17 02:23:15 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.240
[Mon Jun 17 02:23:15 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.55"
[Mon Jun 17 03:07:41 2013] fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jun 17 03:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_src4.csv
[Mon Jun 17 03:07:41 2013] fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jun 17 03:07:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_src4.csv
[Mon Jun 17 03:07:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 03:07:42 2013] fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jun 17 03:07:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun 17 03:07:42 2013] fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jun 17 03:07:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jun 17 03:07:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673180401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 03:08:03 2013] Source 7 is offset by 8.909723 and 1.611659 pixels which is larger than
2 X fitted extent = 1.097306 x 1.097306, not incorporating fit results
[Mon Jun 17 03:08:03 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 03:08:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 03:08:03 2013] Assessing source extent using major
[Mon Jun 17 03:08:03 2013] Source does appear to be extended
[Mon Jun 17 03:08:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 04:28:09 2013] XMMSAS src. selection expression = ellipse(23104.921936, 32850.812317, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 04:28:09 2013] Writing source region out to fullrun_mos2_xmm0673180401_pi300-10000_pass1_cl_src7_src.reg
[Mon Jun 17 04:28:09 2013] Extracting stamp from image fullrun_mos2_xmm0673180401_pi300-10000_cl_sm2.00.img.gz, (229, 341) - (304, 416)
[Mon Jun 17 04:28:09 2013] XMMSAS bgd. selection expression = annulus(23104.921936, 32850.812317, 1087.500000, 2175.000000, X, Y) && !ellipse(28055.444427, 28434.725983, 3480.000000, 3480.000000, 0.000000, X, Y)
[Mon Jun 17 04:28:09 2013] Writing fullrun_mos2_xmm0673180401_pi300-10000_pass1_cl_src7.gif
[Mon Jun 17 04:29:25 2013] Mean detx,y = (5594.27, 4461.13) 
[Mon Jun 17 04:29:28 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 04:30:01 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 04:30:02 2013] Setting source spectrum file to fullrun_mos2_xmm0673180401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 17 04:30:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673180401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jun 17 04:50:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 04:50:18 2013] rmf not generated due to insufficient counts
[Mon Jun 17 05:12:38 2013] Updating aperture counts using extracted products
[Mon Jun 17 05:12:38 2013] Total counts from fullrun_mos2_xmm0673180401_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 265.00
[Mon Jun 17 05:12:38 2013] Total counts from fullrun_mos2_xmm0673180401_pi300-10000_pass1_cl_src7_bgd.pi.gz = 980.00
[Mon Jun 17 05:12:38 2013] Got source and background scale factors 1270284.000000, 9681958.000000
[Mon Jun 17 05:12:38 2013] User source parameters:
  Position = (266.1, 378.2) = 20 3 52.38 -55 52 10.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 136.4 +/- 17.3
  Background aperture counts = 128.6
  Rate = 0.004 +/- 0.0005

[Mon Jun 17 05:12:38 2013] Updating counts from extracted products
[Mon Jun 17 05:12:38 2013] Set source signif. to 136.42/11.34 = 12.03
[Mon Jun 17 05:12:45 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 17 05:12:45 2013] Using photon index=1.80, rate=0.00405, arf fullrun_mos2_xmm0673180401_pi300-10000_pass1_cl_src7.arf
[Mon Jun 17 05:12:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 17 05:12:45 2013] Updating source flux to 6.5e-14
[Mon Jun 17 05:12:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 17 05:12:58 2013] xmm0673180401/analysis//spectral/fullrun_mos2_xmm0673180401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete