[Wed Jul 11 06:04:42 2012] Detection parameters:
  Position = (193.1, 184.3) = 19 12 13.48 -57 9 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.6 +/- 27.4
  Background counts = 164.5
  Rate = 0.005 +/- 0.0004

[Wed Jul 11 06:04:43 2012] Off-axis axis estimate = 11.26'
[Wed Jul 11 06:08:22 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 06:08:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 06:08:22 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Wed Jul 11 06:08:22 2012] source mask rpix=2.8, npix_max = 42, mask sum = 21, frac = 0.490
[Wed Jul 11 06:08:22 2012] Skipping simple spatial due to low active detector fraction
[Wed Jul 11 08:26:47 2012] Spatial fit model total counts = 1512.390000, observed total counts = 1478.000000
[Wed Jul 11 08:26:47 2012] Offset between fit and detection position for source 7 = 0.868107 pixels
[Wed Jul 11 08:26:47 2012] Warning, changing simple spatial fit ID from -1 to 6
[Wed Jul 11 08:26:47 2012] 1531.217400 total counts/ 1460.630000 bgd. counts: snr = 1.846958
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.868107 pixels
  Position = (192.3, 184.2) = 19 12 13.93 -57 9 45.1
  Extent = 4.0 (3.1-5.6)", rotation angle = 0
  Source counts = 70.6 +/- 39.1
  Background counts = 1460.6
  Rate = 0.001 +/- 0.0007
[Wed Jul 11 08:26:47 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 08:26:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 08:26:47 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 08:26:47 2012] Source does appear to be extended
[Wed Jul 11 08:26:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 08:27:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 08:27:08 2012] Initial guess for spatial extent in simple fitting = 3.98"
[Wed Jul 11 08:27:08 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.750
[Wed Jul 11 08:27:08 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 3.98"
[Wed Jul 11 09:20:00 2012] fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_src6.ximg exists
[Wed Jul 11 09:20:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_src6.csv
[Wed Jul 11 09:20:00 2012] fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Jul 11 09:20:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_src6.csv
[Wed Jul 11 09:20:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 09:20:00 2012] fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Jul 11 09:20:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jul 11 09:20:00 2012] fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Jul 11 09:20:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Jul 11 09:20:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673170201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 10:46:37 2012] Spatial fit model total counts = 1654.370000, observed total counts = 1214.000000
[Wed Jul 11 10:46:37 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 11 10:46:37 2012] Spatial fit model total counts = 1515.740000, observed total counts = 1478.000000
[Wed Jul 11 10:46:37 2012] Offset between fit and detection position for source 7 = 0.154256 pixels
[Wed Jul 11 10:46:37 2012] Warning, changing simple spatial fit ID from 6 to 7
[Wed Jul 11 10:46:37 2012] 1535.258100 total counts/ 1466.340000 bgd. counts: snr = 1.799766
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.154256 pixels
  Position = (192.1, 184.1) = 19 12 14.01 -57 9 45.2
  Extent = 3.6 (3.1-5.4)", rotation angle = 0
  Source counts = 68.9 +/- 39.2
  Background counts = 1466.3
  Rate = 0.001 +/- 0.0007
[Wed Jul 11 10:46:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 10:46:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 10:46:37 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 10:46:37 2012] Source does appear to be extended
[Wed Jul 11 10:46:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 10:47:03 2012] XMMSAS src. selection expression = ellipse(16666.708000, 15970.976000, 217.042206, 217.042206, 0.000000, X, Y)
[Wed Jul 11 10:47:03 2012] Writing source region out to fullrun_pn_xmm0673170201_pi300-10000_pass1_cl_src7_src.reg
[Wed Jul 11 10:47:03 2012] Extracting stamp from image fullrun_pn_xmm0673170201_pi300-10000_cl_sm2.00.img.gz, (180, 172) - (205, 197)
[Wed Jul 11 10:47:03 2012] XMMSAS bgd. selection expression = annulus(16666.708000, 15970.976000, 361.737010, 723.474021, X, Y) && !ellipse(16020.770111, 16106.386841, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 11 10:47:03 2012] Writing fullrun_pn_xmm0673170201_pi300-10000_pass1_cl_src7.gif
[Wed Jul 11 11:04:06 2012] Mean detx,y = (8816.01, -7871.75) 
[Wed Jul 11 11:04:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 11:04:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 11:04:27 2012] Setting source spectrum file to fullrun_pn_xmm0673170201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 11 11:04:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0673170201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Jul 11 12:33:44 2012] Not generating rmf since there are only 68 counts
[Wed Jul 11 12:33:44 2012] rmf not generated due to insufficient counts
[Wed Jul 11 14:58:42 2012] Updating aperture counts using extracted products
[Wed Jul 11 14:58:42 2012] Error reading totcts from fullrun_pn_xmm0673170201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Jul 11 14:58:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 14:58:42 2012] Using photon index=1.80, rate=0.00116, arf fullrun_pn_xmm0673170201_pi300-10000_pass1_cl_src7.arf
[Wed Jul 11 14:58:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 14:58:42 2012] Getting flux using calc_pl_flux failed
[Wed Jul 11 15:01:49 2012] Flag p found in src. 7 procflags, skipping spectral fitting
[Wed Jul 11 15:01:49 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting