[Fri May 10 01:06:45 2013] Detection parameters:
  Position = (411.7, 105.5) = 5 40 23.72 69 10 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.6 +/- 10.8
  Background counts = 26.3
  Rate = 0.002 +/- 0.0004

[Fri May 10 01:06:46 2013] Off-axis axis estimate = 16.22'
[Fri May 10 01:08:44 2013] Using EEF radius (= 14.54 ")to estimate initial spatial extent for simple fitting
[Fri May 10 01:08:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 01:08:44 2013] Initial guess for spatial extent in simple fitting = 14.54"
[Fri May 10 01:08:44 2013] source mask rpix=3.3, npix_max = 59, mask sum = 43, frac = 0.728
[Fri May 10 01:08:44 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 14.54"
[Fri May 10 02:14:23 2013] fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_src6.ximg exists
[Fri May 10 02:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_src6.csv
[Fri May 10 02:14:23 2013] fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri May 10 02:14:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_src6.csv
[Fri May 10 02:14:23 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 02:14:24 2013] fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri May 10 02:14:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri May 10 02:14:24 2013] fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri May 10 02:14:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri May 10 02:14:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673170101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 02:23:37 2013] Source 6 is offset by 8.148168 and 0.697946 pixels which is larger than
2 X fitted extent = 7.825747 x 13.369656, not incorporating fit results
[Fri May 10 02:23:37 2013] Vigneting correction estimate = 1.000000
[Fri May 10 02:23:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 02:23:37 2013] Assessing source extent using major
[Fri May 10 02:23:37 2013] Source does appear to be extended
[Fri May 10 02:23:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 02:23:44 2013] Using EEF radius (= 14.54 ")to estimate initial spatial extent for simple fitting
[Fri May 10 02:23:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 10 02:23:44 2013] Initial guess for spatial extent in simple fitting = 14.54"
[Fri May 10 02:23:44 2013] source mask rpix=3.3, npix_max = 59, mask sum = 43, frac = 0.728
[Fri May 10 02:23:44 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 14.54"
[Fri May 10 03:28:24 2013] fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_src6.ximg exists
[Fri May 10 03:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_src6.csv
[Fri May 10 03:28:24 2013] fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri May 10 03:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_src6.csv
[Fri May 10 03:28:24 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 03:28:25 2013] fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri May 10 03:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 10 03:28:25 2013] fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri May 10 03:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri May 10 03:28:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673170101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 03:37:55 2013] Warning, spatial fit 6 centroid is now closest to src. 3
[Fri May 10 03:37:55 2013] Vigneting correction estimate = 1.000000
[Fri May 10 03:37:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 03:37:55 2013] Assessing source extent using major
[Fri May 10 03:37:55 2013] Source does appear to be extended
[Fri May 10 03:37:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 03:38:02 2013] XMMSAS src. selection expression = ellipse(35771.174622, 9128.598145, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 03:38:02 2013] Writing source region out to fullrun_pn_xmm0673170101_pi300-10000_pass1_cl_src6_src.reg
[Fri May 10 03:38:02 2013] Extracting stamp from image fullrun_pn_xmm0673170101_pi300-10000_cl_sm2.00.img.gz, (374, 68) - (449, 143)
[Fri May 10 03:38:02 2013] XMMSAS bgd. selection expression = annulus(35771.174622, 9128.598145, 1087.500000, 2175.000000, X, Y) && !ellipse(36216.197357, 9869.045990, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 03:38:02 2013] Writing fullrun_pn_xmm0673170101_pi300-10000_pass1_cl_src6.gif
[Fri May 10 03:44:09 2013] Mean detx,y = (-8884.93, -16210.84) 
[Fri May 10 03:44:12 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 03:44:34 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 03:44:35 2013] Setting source spectrum file to fullrun_pn_xmm0673170101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri May 10 03:44:35 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673170101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri May 10 04:13:51 2013] Not generating rmf since there are only 56 counts
[Fri May 10 04:13:51 2013] rmf not generated due to insufficient counts
[Fri May 10 04:43:23 2013] Updating aperture counts using extracted products
[Fri May 10 04:43:23 2013] Total counts from fullrun_pn_xmm0673170101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 192.00
[Fri May 10 04:43:23 2013] Total counts from fullrun_pn_xmm0673170101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 454.00
[Fri May 10 04:43:23 2013] Got source and background scale factors 794793.000000, 2054372.000000
[Fri May 10 04:43:23 2013] User source parameters:
  Position = (411.7, 105.5) = 5 40 23.72 69 10 2.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 16.4 +/- 14.9
  Background aperture counts = 175.6
  Rate = 0.0008 +/- 0.0007

[Fri May 10 04:43:23 2013] Updating counts from extracted products
[Fri May 10 04:43:23 2013] Set source signif. to 16.36/13.25 = 1.23
[Fri May 10 04:43:31 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 04:43:31 2013] Using photon index=1.80, rate=0.000808, arf fullrun_pn_xmm0673170101_pi300-10000_pass1_cl_src6.arf
[Fri May 10 04:43:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 04:43:31 2013] Updating source flux to 9.2e-15
[Fri May 10 04:43:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 04:43:39 2013] xmm0673170101/analysis//spectral/fullrun_pn_xmm0673170101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete