[Fri May 10 00:16:37 2013] Detection parameters:
  Position = (202.6, 384.5) = 9 17 8.18 29 22 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 364.0 +/- 23.8
  Background counts = 30.2
  Rate = 0.01 +/- 0.0008

[Fri May 10 00:16:38 2013] Off-axis axis estimate = 9.34'
[Fri May 10 00:18:25 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Fri May 10 00:18:25 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Fri May 10 00:18:25 2013] source mask rpix=2.6, npix_max = 37, mask sum = 23, frac = 0.618
[Fri May 10 00:18:25 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.10"
[Fri May 10 01:40:10 2013] fullrun_pn_xmm0673150301_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 10 01:40:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673150301_pi300-10000_cl_pass0_src3.csv
[Fri May 10 01:40:10 2013] fullrun_pn_xmm0673150301_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 10 01:40:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673150301_pi300-10000_cl_pass0_src3.csv
[Fri May 10 01:40:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673150301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673150301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 01:40:10 2013] fullrun_pn_xmm0673150301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 10 01:40:10 2013] fullrun_pn_xmm0673150301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 10 01:40:10 2013] Fit fullrun_pn_xmm0673150301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri May 10 03:08:57 2013] Spatial fit model total counts = 657.803000, observed total counts = 593.000000
[Fri May 10 03:08:57 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 03:08:57 2013] Source 3 is offset by 1.846182 and 0.089237 pixels which is larger than
2 X fitted extent = 1.351016 x 1.351016, not incorporating fit results
[Fri May 10 03:08:57 2013] Vigneting correction estimate = 1.000000
[Fri May 10 03:08:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 03:08:57 2013] Assessing source extent using major
[Fri May 10 03:08:57 2013] Source does appear to be extended
[Fri May 10 03:08:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 03:09:18 2013] Using EEF radius (= 11.10 ")to estimate initial spatial extent for simple fitting
[Fri May 10 03:09:18 2013] Initial guess for spatial extent in simple fitting = 11.10"
[Fri May 10 03:09:18 2013] source mask rpix=2.6, npix_max = 37, mask sum = 23, frac = 0.618
[Fri May 10 03:09:18 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.10"
[Fri May 10 04:25:39 2013] fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 10 04:25:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_src3.csv
[Fri May 10 04:25:39 2013] fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 10 04:25:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_src3.csv
[Fri May 10 04:25:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:25:39 2013] fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 10 04:25:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 10 04:25:39 2013] fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 10 04:25:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 10 04:25:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673150301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 05:52:37 2013] Warning, spatial fit 3 centroid is now closest to src. 17
[Fri May 10 05:52:37 2013] Spatial fit model total counts = 1238.760000, observed total counts = 284.000000
[Fri May 10 05:52:37 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 05:52:37 2013] Vigneting correction estimate = 1.000000
[Fri May 10 05:52:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 05:52:37 2013] Assessing source extent using major
[Fri May 10 05:52:37 2013] Source does appear to be extended
[Fri May 10 05:52:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 05:53:08 2013] XMMSAS src. selection expression = ellipse(17575.727844, 33401.109619, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 05:53:08 2013] Writing source region out to fullrun_pn_xmm0673150301_pi300-10000_pass1_cl_src3_src.reg
[Fri May 10 05:53:08 2013] Extracting stamp from image fullrun_pn_xmm0673150301_pi300-10000_cl_sm2.00.img.gz, (165, 347) - (240, 422)
[Fri May 10 05:53:08 2013] XMMSAS bgd. selection expression = annulus(17575.727844, 33401.109619, 1087.500000, 2175.000000, X, Y) && !ellipse(16893.880478, 34227.936188, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 05:53:08 2013] Writing fullrun_pn_xmm0673150301_pi300-10000_pass1_cl_src3.gif
[Fri May 10 05:54:35 2013] Mean detx,y = (4668.30, 11046.53) 
[Fri May 10 05:54:38 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 05:55:08 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 05:55:08 2013] Setting source spectrum file to fullrun_pn_xmm0673150301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 10 05:55:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673150301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 10 06:25:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 06:25:09 2013] rmf not generated due to insufficient counts
[Fri May 10 07:47:30 2013] Updating aperture counts using extracted products
[Fri May 10 07:47:30 2013] Total counts from fullrun_pn_xmm0673150301_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 489.00
[Fri May 10 07:47:31 2013] Total counts from fullrun_pn_xmm0673150301_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1156.00
[Fri May 10 07:47:31 2013] Got source and background scale factors 1040852.000000, 7766969.000000
[Fri May 10 07:47:31 2013] User source parameters:
  Position = (202.6, 384.5) = 9 17 8.18 29 22 17.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 334.1 +/- 23.1
  Background aperture counts = 154.9
  Rate = 0.01 +/- 0.0008

[Fri May 10 07:47:31 2013] Updating counts from extracted products
[Fri May 10 07:47:31 2013] Set source signif. to 334.08/12.45 = 26.84
[Fri May 10 07:47:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 07:47:39 2013] Using photon index=1.80, rate=0.0112, arf fullrun_pn_xmm0673150301_pi300-10000_pass1_cl_src3.arf
[Fri May 10 07:47:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 07:47:39 2013] Updating source flux to 1.1e-13
[Fri May 10 07:47:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 07:47:59 2013] xmm0673150301/analysis//spectral/fullrun_pn_xmm0673150301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete