[Sat May 11 03:38:12 2013] Detection parameters:
  Position = (293.4, 244.9) = 12 38 16.20 -38 44 52.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.7 +/- 18.2
  Background counts = 86.8
  Rate = 0.01 +/- 0.002

[Sat May 11 03:38:13 2013] Off-axis axis estimate = 3.90'
[Sat May 11 03:40:01 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Sat May 11 03:40:01 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Sat May 11 03:40:01 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.850
[Sat May 11 03:40:01 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 8.38"
[Sat May 11 04:25:34 2013] fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_src9.ximg exists
[Sat May 11 04:25:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_src9.csv
[Sat May 11 04:25:34 2013] fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat May 11 04:25:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_src9.csv
[Sat May 11 04:25:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 04:25:34 2013] fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat May 11 04:25:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 11 04:25:34 2013] fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat May 11 04:25:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat May 11 04:25:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 05:19:42 2013] Warning, spatial fit 9 centroid is now closest to src. 12
[Sat May 11 05:19:42 2013] Vigneting correction estimate = 1.000000
[Sat May 11 05:19:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 05:19:42 2013] Assessing source extent using major
[Sat May 11 05:19:42 2013] Source does appear to be extended
[Sat May 11 05:19:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 05:19:51 2013] Using EEF radius (= 8.38 ")to estimate initial spatial extent for simple fitting
[Sat May 11 05:19:51 2013] Initial guess for spatial extent in simple fitting = 8.38"
[Sat May 11 05:19:51 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.850
[Sat May 11 05:19:51 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 8.38"
[Sat May 11 05:56:16 2013] fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_src6.ximg exists
[Sat May 11 05:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_src6.csv
[Sat May 11 05:56:16 2013] fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat May 11 05:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_src6.csv
[Sat May 11 05:56:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 05:56:16 2013] fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat May 11 05:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat May 11 05:56:16 2013] fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat May 11 05:56:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6.csv
[Sat May 11 05:56:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 06:35:03 2013] Spatial fit model total counts = 946.332000, observed total counts = 690.000000
[Sat May 11 06:35:03 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 06:35:03 2013] Vigneting correction estimate = 1.000000
[Sat May 11 06:35:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 06:35:03 2013] Assessing source extent using major
[Sat May 11 06:35:03 2013] Source does appear to be extended
[Sat May 11 06:35:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 06:35:13 2013] XMMSAS src. selection expression = ellipse(25473.439056, 21257.949478, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 11 06:35:13 2013] Writing source region out to fullrun_pn_xmm0673140501_pi300-10000_pass1_cl_src9_src.reg
[Sat May 11 06:35:13 2013] Extracting stamp from image fullrun_pn_xmm0673140501_pi300-10000_cl_sm2.00.img.gz, (256, 207) - (331, 282)
[Sat May 11 06:35:13 2013] XMMSAS bgd. selection expression = annulus(25473.439056, 21257.949478, 1087.500000, 2175.000000, X, Y) && !ellipse(25485.524200, 23879.749400, 1410.156041, 1389.724840, 326.506000, X, Y) && !ellipse(26682.444000, 23009.609000, 1226.424035, 1226.424035, 0.000000, X, Y)
[Sat May 11 06:35:13 2013] Writing fullrun_pn_xmm0673140501_pi300-10000_pass1_cl_src9.gif
[Sat May 11 06:49:35 2013] Mean detx,y = (993.50, -2716.65) 
[Sat May 11 06:49:38 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 06:49:57 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 06:49:58 2013] Setting source spectrum file to fullrun_pn_xmm0673140501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat May 11 06:49:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0673140501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat May 11 07:06:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May 11 07:06:37 2013] rmf not generated due to insufficient counts
[Sat May 11 07:37:19 2013] Updating aperture counts using extracted products
[Sat May 11 07:37:19 2013] Total counts from fullrun_pn_xmm0673140501_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 440.00
[Sat May 11 07:37:19 2013] Total counts from fullrun_pn_xmm0673140501_pi300-10000_pass1_cl_src9_bgd.pi.gz = 1999.00
[Sat May 11 07:37:19 2013] Got source and background scale factors 1054486.000000, 7651523.000000
[Sat May 11 07:37:19 2013] User source parameters:
  Position = (293.4, 244.9) = 12 38 16.20 -38 44 52.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 164.5 +/- 22.0
  Background aperture counts = 275.5
  Rate = 0.02 +/- 0.002

[Sat May 11 07:37:19 2013] Updating counts from extracted products
[Sat May 11 07:37:19 2013] Set source signif. to 164.51/16.60 = 9.91
[Sat May 11 07:37:20 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 07:37:20 2013] Using photon index=1.80, rate=0.0151, arf fullrun_pn_xmm0673140501_pi300-10000_pass1_cl_src9.arf
[Sat May 11 07:37:20 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 07:37:20 2013] Updating source flux to 6.1e-14
[Sat May 11 07:37:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 11 07:37:30 2013] xmm0673140501/analysis//spectral/fullrun_pn_xmm0673140501_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete