[Sat May 11 03:38:38 2013] Detection parameters:
  Position = (323.3, 205.1) = 12 38 5.05 -38 47 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.8 +/- 16.6
  Background counts = 11.9
  Rate = 0.01 +/- 0.001

[Sat May 11 03:38:38 2013] Off-axis axis estimate = 7.00'
[Sat May 11 04:52:29 2013] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Sat May 11 04:52:29 2013] Initial guess for spatial extent in simple fitting = 9.93"
[Sat May 11 04:52:29 2013] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.807
[Sat May 11 04:52:29 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.93"
[Sat May 11 05:19:38 2013] fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_src4.ximg exists
[Sat May 11 05:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_src4.csv
[Sat May 11 05:19:38 2013] fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat May 11 05:19:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_src4.csv
[Sat May 11 05:19:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 05:19:39 2013] fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat May 11 05:19:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 11 05:19:39 2013] fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat May 11 05:19:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat May 11 05:19:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0673140501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 05:19:46 2013] Source 2 is offset by 0.815304 and -7.177587 pixels which is larger than
2 X fitted extent = 1.141462 x 2.657476, not incorporating fit results
[Sat May 11 05:19:46 2013] Vigneting correction estimate = 1.000000
[Sat May 11 05:19:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 05:19:46 2013] Assessing source extent using major
[Sat May 11 05:19:46 2013] Source does appear to be extended
[Sat May 11 05:19:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 06:23:27 2013] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Sat May 11 06:23:27 2013] Initial guess for spatial extent in simple fitting = 9.93"
[Sat May 11 06:23:27 2013] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.807
[Sat May 11 06:23:27 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.93"
[Sat May 11 06:34:59 2013] fullrun_mos2_xmm0673140501_pi300-10000_cl_pass1_src4.ximg exists
[Sat May 11 06:34:59 2013] fullrun_mos2_xmm0673140501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat May 11 06:34:59 2013] Fit fullrun_mos2_xmm0673140501_pi300-10000_cl_pass1_src4 appears to have run properly
[Sat May 11 06:34:59 2013] fullrun_mos2_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat May 11 06:34:59 2013] fullrun_mos2_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat May 11 06:34:59 2013] Fit fullrun_mos2_xmm0673140501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat May 11 06:35:06 2013] Spatial fit model total counts = 227.757000, observed total counts = 248.000000
[Sat May 11 06:35:06 2013] Offset between fit and detection position for source 2 = 0.990815 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.990815 pixels
  Position = (323.3, 206.1) = 12 38 5.07 -38 47 45.3
  Extent = 9.8 (9.7-9.9)", rotation angle = 0
  Source counts = 392.1 +/- 19.8
  Background counts = 0.0
  Rate = 0.02 +/- 0.001
[Sat May 11 06:35:06 2013] Vigneting correction estimate = 1.000000
[Sat May 11 06:35:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 06:35:06 2013] Assessing source extent using major axis lower bound
[Sat May 11 06:35:06 2013] Source does appear to be extended
[Sat May 11 06:35:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 07:20:36 2013] XMMSAS src. selection expression = ellipse(28075.756400, 17880.154320, 588.912617, 588.912617, 0.000000, X, Y)
[Sat May 11 07:20:36 2013] Writing source region out to fullrun_mos2_xmm0673140501_pi300-10000_pass1_cl_src2_src.reg
[Sat May 11 07:20:36 2013] Extracting stamp from image fullrun_mos2_xmm0673140501_pi300-10000_cl_sm2.00.img.gz, (289, 172) - (357, 240)
[Sat May 11 07:20:36 2013] XMMSAS bgd. selection expression = annulus(28075.756400, 17880.154320, 981.521028, 1963.042056, X, Y) && !ellipse(29031.403800, 15515.654200, 565.992816, 321.372809, 350.515661, X, Y)
[Sat May 11 07:20:36 2013] Writing fullrun_mos2_xmm0673140501_pi300-10000_pass1_cl_src2.gif
[Sat May 11 07:24:20 2013] Mean detx,y = (658.81, 6695.58) 
[Sat May 11 07:24:21 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 11 07:24:41 2013] Binned source spectrum to 10 counts/bin
[Sat May 11 07:24:41 2013] Setting source spectrum file to fullrun_mos2_xmm0673140501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 11 07:24:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0673140501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat May 11 07:37:22 2013] Updating aperture counts using extracted products
[Sat May 11 07:37:22 2013] Total counts from fullrun_mos2_xmm0673140501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 218.00
[Sat May 11 07:37:22 2013] Total counts from fullrun_mos2_xmm0673140501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 233.00
[Sat May 11 07:37:22 2013] Got source and background scale factors 634718.000000, 3922527.000000
[Sat May 11 07:37:22 2013] User source parameters:
  Position = (323.3, 206.1) = 12 38 5.07 -38 47 45.3
  Extent = 9.8 (9.7-9.9)", rotation angle = 0
  Source aperture counts = 180.3 +/- 15.8
  Background aperture counts = 37.7
  Rate = 0.01 +/- 0.001

[Sat May 11 07:37:22 2013] Calculating source flux in energy range 0.30-8.00
[Sat May 11 07:37:22 2013] Using photon index=1.80, rate=0.0242, arf fullrun_mos2_xmm0673140501_pi300-10000_pass1_cl_src2.arf
[Sat May 11 07:37:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 11 07:37:23 2013] Updating source flux to 5.9e-13
[Sat May 11 07:37:25 2013] Flag b found in src. 2 procflags, skipping spectral fitting
[Sat May 11 07:37:27 2013] xmm0673140501/analysis//spectral/fullrun_mos2_xmm0673140501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete